|
| 1 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified and directed. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm,complete all as specified and directed. |
| 4 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed. |
| 5 | M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 7 | M&L forPCC 1:3:6 type C-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 8 | M&LMS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding, painting complete all as specified and directed. |
| 9 | M&L in repair MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding fixed in repair, painting complete all as specified and directed. |
| 10 | S&F in repair Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steelspring, complete all as specified and directed. |
| 11 | S&F 2nd class Hard wood Small Fittings such as shaped door and window stops and the like incl all necessary labours articles not exceeding 200 Cu cm each complete all as specified and directed. |
| 12 | S&F Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 13 | S&F continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed. |
| 14 | S&F in repair stainless steel / powder coatedPeg set of five of good quality approvedby Engr inCharge complete all as specified and directed. |
| 15 | S&F Metcraft Brass Door viewer (Magic Eye) 180 Degree glass lens with perfect matching main door, complete all as specified and as directed. |
| 16 | S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with ommercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 17 | S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 18 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 19 | S& F 18 mm solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 20 | S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 21 | S& F 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 22 | M & L for Providing and injecting Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed. |
| 23 | M & L for Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-charge. |
| 24 | M & L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed by Engineer-in-charge. |
| 25 | M&L Cutting holes in stonewalls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer-in-charge. |
| 26 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | Framed work410-W as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hingeswelding complete all as specified and directed. |
| 28 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 29 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC \"C\" channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at sitecomplete all as specified and directed. |
| 30 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 31 | M&L for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed. |
| 32 | Ditto all as per item No 31 above but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed. |
| 33 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer incl taking down old, complete all specified.Note :- (i)The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.(ii)Glazing, wire gauge shall be measured and paid separately. |
| 34 | S & F infor Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window .(b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf .(c) MS Tower bolt 150mm long - 02No per leaf .(d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf .(e) Cleat 55mm Long of Hollow Square 15mmx20mmx63mm welded to Hinge 01 No per Leaf .(f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staplesand glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and incl taking down old. |
| 35 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 36 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces over a coat of pink primer of any description over 10 cm width or girth complete all as specified and as directed. |
| 37 | S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed. |
| 38 | S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and as directed. |
| 39 | S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 40 | S&F in repair 150mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and as directed. |
| 41 | S&F for 125mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and directed. |
| 42 | S&F in repair 125mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and directed. |
| 43 | S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed. |
| 44 | S&F in repair 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed. |
| 45 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed. |
| 46 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed. |
| 47 | S&F 100mm longHasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 48 | S&F in repair 100mm longAluminium anodised Hasp and staple incl bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 49 | S&F in repair, cast iron body Door Closer Hydralically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 50 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 51 | S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 52 | S&F Anodised aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 53 | S&Fpowder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site)type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete allspecifiedand directed. |
| 54 | S&Faluminium power coateddoor shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 55 | S&F for sheet glass palin/coloured (as per directed by Engr-in-charge) 5.5mm mmthickbest qualityandglazing with rubber packing, screws or glass putty in squares exc 0.5Sqmeach panecomplete all as specified and directed. |
| 56 | S & F for stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed. |
| 57 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 58 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed. |
| 59 | M & L for Repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refix in the same opening after complete repair except glass complete all as specified and directed. |
| 60 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 61 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 62 | S&F for Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling, complete all as specified and directed. |
| 63 | M&L 06 mm thick non asbestos fibre cement building boards (size 600X600mm) fixedor laid / inserted to timber / GI / Aluminium frames work with screws as in ceiling flat or slopingincl refixing in position of electric wiring, lights and fittings etc, complete if exists complete all as specified and as directed.Make-Everest. |
| 64 | S&F in repair PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheetinclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed. |
| 65 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 66 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing coat, complete all as specified and as directed. |
| 67 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed. |
| 68 | M&L forNon-skidColoured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match includingscreedbedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed. |
| 69 | All as per item No. 33 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as spfd colour and design approved by Engr-in-Charge. Make:- Somany, Kajaria, Johnson, Nitco. |
| 70 | M & L for Glazed coloured ceramic tiles in vertical surface 350x 250x7mm / 450x350x7mm thick set and jointed in neatcement slurry and pointed in white or colour cement to match over 10mm thk rendering in CM 1:3, complete all as specified and as directed. |
| 71 | Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed. |
| 72 | Demolition of stone slabs of any description or thickness inkitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as specified and directed. |
| 73 | Material & labour for green marble stone of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps,jambs,pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 74 | M&L Granite slab 16 to 18mm thick as in pillas, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and directed. |
| 75 | M&L machine cut Kota stone slab flooring18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclcutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 76 | M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 inclcutting, rubbing, gridding and polshing to achive mirror finish complete all as spd. |
| 77 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed. |
| 78 | M&L brick work with sub class B bricks straight or curved on plan exc 6m rediusin CM 1:6 complete all as specified and as directed. |
| 79 | All as per above item no78 but except bricks complete all as specified and directed. |
| 80 | M&L brick work with sub class B bricks straight or curved on planto any radious in half brick thick built inCM 1:4, complete all as specified and as directed. |
| 81 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed. |
| 82 | M&L for rendering 10mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed. |
| 83 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 84 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. |
| 85 | M & L for preparation of new plasteredsurface of wall and applying two coats of oil emulsion distemper over a coat ofprimer over a coat of JK/Birla wall care puttycomplete all as specified and directed. |
| 86 | M&L 2-3mm thick wall care putty on wall complete all as specified and directed. |
| 87 | M & LPreparing New Surfaces of Walls and applying two coats of Cement base paint complete all as specified and as directed. |
| 88 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 89 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and as directed. |
| 90 | M&L and taking down of existing unserviceable roof treatment materials and PCC/CM/Brick tiles padding etc from top of roof upto slab (complete depth) carefully by cutting chiseling, cleaning the surface by scraping brooming brushing etc and removing the rubbish from site exc. 500m but n exc 5.00 Km (Outside of MoD land) and applying roof treatment with the following specifications:-(a) Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compound shall be paid and measured separtely).(b) Applying evenly first coat cold bitumen primer confirming to IS-3384-1986 @ 0.40 Ltr per square metre on the cleaned plastered surfaces.(c) Applying evenly second coat of blown hot bitumen of grade 85/25 @ 1.20 kg per square metre (confirming to IS-702) on primed surfaces.(d) Applying third coat of APP modified membrane 3mm thick (minimum) and weight 3.60 Kg per square metre (reinforced) withpolyster non woven fabric weighing not less than 150gms per square metre by torch application. The overlap shall not be less than 100mm on the transverse direction and 75mm on longitudinal direction respectively and sealing overlaps.Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab.(ii) The work shall be executed through well-trained applicators as per manufacturer\"s instructions after obtaining written approval from the GE. (iii)Make of Butumen:HPCL, IOCL & BPCL(iv)Make of APP Membrane: M/s Sika India Pvt Ltd, M/s STP limited, M/s IWL India Ltd, M/s Asian Paints Ltd.(v) Torchtar Brand APPMembrane , flashing tapes & wraping coat. |
| 91 | Supply only Integral Water Proofing compound, complete all as specified. |
| 92 | Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etcfrom tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 93 | Disconnecting existing water tanks exc 500 & n.exc 1000 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etcfrom tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 94 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 95 | S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.)complete all as specified and directed. |
| 96 | Fixing only water tubes of 15mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 97 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified . |
| 98 | M&L for steel water tubingof nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.)complete all as specified and directed. |
| 99 | Fixing only water tubes of 20mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 100 | M & L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed. |
| 101 | Dismantlingand removing to water storage tanks of capacity exceeding 250 liters but not exceeding500 ltrs and removing to stores complete all as specified . |
| 102 | Dismantlingand removing to water storage tanks of capacity exceeding 500 liters but not exceeding1000 ltrs and removing to stores complete all as specified . |
| 103 | S&F for 500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I. |
| 104 | S&F for 1000 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I. |
| 105 | S & F in repairs,15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimumweight15mm-142gms complete all as specified and as directed. |
| 106 | Supply and fixing in repairsfor 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed. |
| 107 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 108 | Supply and fixing in repairs tank cover black/white (with arrangement for locking) of water storage tank of any capacity complete all as specified & directed. |
| 109 | Taking down existing damaged IWC alongwith complete PCC and lime concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPCall around and base of sunken floor with proper slope.(ii)Applying a coat of 85/25 grade hot bitumen @ 0.70Kg/Sqm over a coat of bituminous primer @ 0.5Kg / Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhesive.(iii) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (iv)Filling sunken portion with PCC (1:4:8) type D2 using 40 mm graded aggregate after tesing of water tightness. . |
| 110 | Supply and fixing Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screwscomplete all as specified and directed. (Make John son Bathrooms-Cat Part No P0519WO703 Size 390x360x615mm) |
| 111 | S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. |
| 112 | S/F in repair Vitreous china wash down water closetPan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. |
| 113 | S&F in repairsOne piece WC incl flushing cistern and soft closing seat cover and all connected items complete all as spfd. Make :- CERA (CAPSTAN) Cat part No.:-S1013108, Jaquar Cat No. :- VGS-WHT- 81851SN size 715x375x795mm. |
| 114 | S&F in repair EWC seat cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge devic, complete all as specified and as directed. |
| 115 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 116 | S&F in repair CP Seat jet with one meter PVC tube complete all as spfd. |
| 117 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified. |
| 118 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 119 | S & F in repairs,Wash basins, vitreous china white (Angle back type) of size 400x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. |
| 120 | S & F in repairs,Wash basins, vitreous china white of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. |
| 121 | M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 122 | Supply and fixing in repairs internal fittings Kit complete for vitreous china flush cistern with twin flush ofMake -: CERA Cat Part No - 2115, 2235 or equivalent of make given in Appx \"B\" as approved by GE. |
| 123 | Supply only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed. |
| 124 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and as directed. |
| 125 | ditto but concealed type complete all as specified and as directed. |
| 126 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. |
| 127 | S&F in repair, Bib taps cast copper alloy15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwddboth ends for iron pipe or for unions, complete all as specified and as directed. |
| 128 | S&F in repair bib taps 15mm bore long body, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified. |
| 129 | Supply and fixing in repairs 15 mm bib tap standard of PTMTany colour high pressure screwed for iron pipe & fixed minimum weight 90gm/each complete all as specified and directed. |
| 130 | Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional complete all as specified and directed. |
| 131 | Supplying and fixing in repairs the internal spindle (face) of 15 mm diameter stop cock / bib tap / angle valve, including taking down the fitting, dismantling as required, replacement of worn-out spindle/face with new one of approved make, refixing, testing for smooth operation and leakage, and making good the disturbed portion complete, all as directed by the Engineer-in-Charge. |
| 132 | S&F in repairs size 25mm (01\") extension nipple complete, all as directed by the Engineer-in-Charge. |
| 133 | S&F in repairs size 35mm (1.5\") extension nipple complete, all as directed by the Engineer-in-Charge. |
| 134 | S&F in repairs geyser connection pipe, 12mm dia, 450mm length (02 Piece set).Make :- CERACat No. F8070403. |
| 135 | S&F in repairs sink cock (wall mounted) with long swivel spout and wall flange.Make :- CERA Cat Part No. :- F1015251. |
| 136 | S&F in repairs sink mixer (wall mounted) with 190 mm (7.5\") long swivel spout connecting les and wall flanges complete all as spfd Make :- CERA Cat Part No. F1015501. |
| 137 | S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complet all as specified and as directed. |
| 138 | S&F in repair brass chromium plated wall mixer with spout (non - shower arrangement) complete for mixing hot & cold water screwed down for iron pipe 15mm bore.Make : CERA Cat Part No.-F2004405. |
| 139 | S&F in repair mirror cabinet with PVC body and openable shutter, shelves and size 350 mm x 450 mm complete all as specified. Make : Neelkamal / ARCO / JINDAL. |
| 140 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 141 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 142 | S&F in repair CP Soap Dish fixed in wall complete all as specified and as directed. |
| 143 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 144 | S&F in repair CP Grating doom 100mm dia completeall as specified and directed. |
| 145 | S&F in repair CP Grating doom 125 mm dia with waste hole completeall as specified and directed. |
| 146 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed. |
| 147 | S&F PVC waste pipe 32/40mm dia for WHB complete all as specified and as directed. |
| 148 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 149 | S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed. |
| 150 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed. |
| 151 | S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 152 | S&F PVC (SWR) bends 75mm bore complete all as specified and as directed. |
| 153 | S&F PVC (SWR) bends 110mm bore complete all as specified and as directed. |
| 154 | S&F PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed. |
| 155 | S&F PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and as directed. |
| 156 | S&F PVC (SWR) 75mm bore Vent cowl complete all as specified and as directed. |
| 157 | S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 100mm bore, complete all as specified. |
| 158 | S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete,completeall as specified. Make: Blue Star. |
| 159 | S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm,complete all as specified. |
| 160 | S&F in repairs for Waste coupling of PTMT (half or full threaded).(Minimum weight 32mm-45gms/40mm-60 gms |
| 161 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified.Make: Cera. |
| 162 | S&F in repairs 25mm dia Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers, end caps etc. complete all as specified. Note :- Quality of all connecting items shall beapproved by GE. |
| 163 | M&L for cleaning the surfaces of accessible roof periodically twice for the entire period of contract, complete all as specified and directed by Engr-in-charge. |
