|
| 1 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons and laid bedded and pointed in any mortar complete all as specified and directed. |
| 2 | M&L forbrickwork in burnt bricks , Modular bricks with Sub class \"B\" bricks straight or curved on plan exc 6m can radius ,builtin cement mortar 1:6 complete all as specified& directed |
| 3 | M&Lfor vitrified ceramic coloured tiles (double charged), 9 to 10mm thick (square or rectangular), polished, area of each tile not exc 0.36 sqm, set and jointedin neat cement slurry and pointed in white or coloured cementto match the shade of tiles as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified& directed |
| 4 | M&Lfor vitrified ceramic coloured tiles (double charged), 9 to 10mm thick (square or rectangular), polished, area of each tile not exc 0.36 sqm, set and jointedin neat cement slurry and pointed in white or coloured cementto match, as in vertical surfaces such as skirting, dado, etc., laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified& directed . |
| 5 | M&L for 25mm thickplain cement concrete 1:2:4, type B-0 (using 12.5 mm niminal size crushed and graded stone aggregates) for levelling / to receivescreed for laying floor finish, finished fair and even complete all as specified and directed |
| 6 | M&L forrendering15 mm thick in cement mortar 1:6 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 7 | M&L forrendering15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment of plastered surface of wallsby scrapping, rubbing down, washing and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 3mm thick wall care putty complete all as specified and directed |
| 9 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 10 | M&L for preparation newly plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm complete all as specified and as directed. |
| 11 | M&L for preparation ofold decorated surfaces of ceilings and applyingtwo coat of white wash completeall as specified and as directed. |
| 12 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over 3mm thicklayer of puttyincludingpriming coatcomplete all as specified and directed |
| 13 | S&F Anodised aluminium powder coated (withminimum thickness of powder coating 50 micron) as in partition frame/door frame with one or more rebates including jointing cleat for fixingcomplete all as specified and directed. |
| 14 | S&F powder coated (thickness or powder coating notless than 50 micron), anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, handles 2 Nos, in each door hinges, aluminium anodised snap beading screws etc and necessary packing materials etc complete all as specified and directed. |
| 15 | S&F Brass mortice lock, vertical type, size 100mm, 6 leverscomplete all as specified and directed |
| 16 | M&L for 12mm thick prelaminated particle board, exteriorgrade, prelaminated both side with lamination fixed to aluminium frame work of partition and door complete all as specified and directed. |
| 17 | S&F sheet plain glass5.5 mm thick, ordinary quality, in squaresnot exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and directed |
| 18 | Removal ofdebries to a distance5km from staring point complete all as specied and directed. |
| 19 | M&L for point wiring for the following with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sqmm single core in and including new non-metallic rigid PVCconcealedconduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULARMETAL FLUSHBOX , modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed:- |
| 20 | One light point controlled by one, one way switch 5 Amp |
| 21 | One socket point on the same board with other switches |
| 22 | One light point controlled socket point on indpendent board |
| 23 | All as per Srl item No.19.00above but one 3 pin socket outlet 15 Amps independent with cable 4 Sqmm size |
| 24 | S&Fswitch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. Make:800100 of Indoaisian ELVIRA/ACWSXXW101 of Havells CRABTREE(Signia)or any other equivalent make as specified in list of makes of PSas approved by GE. |
| 25 | S&Fswitch Modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply complete all as specified and as directed. Make :800105 of Indoaisian ELVIRA/ACWSXIW161 of Havells CRABTREE(Signia)or any other equivalent make as specified in list of makes of PSas approved by GE. |
| 26 | S&FModular type socket5AAC 230V, 50HZ complete all as specified and as directed. Make :802800 of Indoaisian ELVIRA/ACWKPXW063 of Havells CRABTREE(Signia)or any other equivalent make as specified in list of makes of PSas approved by GE. |
| 27 | S&FModular type socket combine 6A/16A multi purpose AC 230CV, 50Hz complete all as specified and as directed.Make :800122 of Indoaisian ELVIRA/ACWKCXW163 of Havells CRABTREE(Signia) make or any other equivalent make as specified in list of makes of PSas approved by GE. |
| 28 | S&F ceiling rose surface backelitethree terminal 240 volts complete all as specified and directed |
| 29 | S&FLED lights fitting 1x 20W, 220V, wall mountedLED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cablefrom ceiling rose complete all as specified and as directed.Make:-Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havellsor any other equivalent make as specified in list of makes of PSas approved by GE. |
| 30 | M&L for sub main wiring in PVC casing capingmin 25 mm diawith 2 single core 06 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVC casing caping complete all as specified and directed. Note:-Two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM. |
| 31 | S&Fsheet metal enclosure Double Door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed. |
| 32 | S&F MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed. |
| 33 | S&F MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specifiedand directed. |
| 34 | S&F wall mounted fan V3 450MM 3 blade (anti dust) complete all as specified and directed |
