|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 2 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia |
| 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 7 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 12 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 14 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning theexposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 15 | 50 mm average thickness |
| 16 | 25 mm average thickness |
| 17 | Cleaning of reinforcement from rust from the reinforcing bars to giveit a total rust free steel surface by using alkaline chemical rustremover of approved make with paint brush and removing looseparticles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 18 | Bars upto 12 mm diameter |
| 19 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 20 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than30 N/Sqmm2) |
| 21 | 12 mm average thickness. |
| 22 | 25 mm average thickness in 2 layers |
| 23 | 50 mm average thickness in 3 layers. |
| 24 | Providing and fixing customized MS sheet cupboard with shutters made of 18 gauge MS sheet, mounted on frame of rectangular hollow section 60x40x3.6 mm, including fixing of frame with hold fasts embedded in cement concrete block (1:3:6) of size 15x10x10 cm and providing and fixing necessary fittings such as hinges, handle and locking arrangement etc., complete. The cupboard shall be spray painted with two or more coats of synthetic enamel paint of required shade at the rate of 1.16 litres per 10 sqm per coat, over a coat of red oxide zinc chromate primer applied at the rate of 0.80 litres per 10 sqm, the rate of application of enamel paint being the same for each coat. All necessary precautions shall be taken by the contractor to prevent damage to adjacent work and surfaces during spray painting. All works shall be carried out to the satisfaction of Engineer-in-Charge( Note: for the purpose of payment only the front face will be measured in sqm.) |
| 25 | Providing and fixing 18 mm thick mirror polished granite (of approved shade, colour and texture)for shelves, including cutting, moulding and edge polishing, embedding 2.5 cm wide granite strip throughout the unexposed length for proper anchorage, scope also invloved making chases in brick work of uniform size 40mmx 40mm and making good the surface with cement concrete 1:3:6, properly fixed with Araldite epoxy adhesive wherever required, including scaffolding, finishing and disposal of debris upto 50 mtr lead, complete as per direction of Engineer-in-Charge. Note : Payment shall be made on the basis of clear exposed dimensions of shelves only; the embedded portion shall not be measured for payment |
| 26 | Providing and applying one coat of Pidicrete MPB followed by two coats of Pidifin 2K over brick wall surface, complete in all respects as per manufacturer’s specifications and as directed by the Engineer-in-Charge. |
| 27 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (make Cera Cat No. QT F 2006152 or equivalent of Jaquar , Kohlar ,Grohe) |
| 28 | Providing and fixing C.P. brass angle valve 15mm nominal bore (make Cera Cat No. F2008201 or equivalent of Jaquar , Kohlar ,Grohe) |
| 29 | Providing and fixing C.P. brass single lever basin mixer with 450 mm braided connection pipe (without Pop-up) of approved quality (make Cera Cat No. F1015451 or equivalent of Jaquar, Kohler, Grohe) |
