|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 2 | Supplying and fixingstepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 3 | S/F the following size/modules G.I box along with modular base and cover plate for modular switches in recess etc as reqd. |
| 4 | 12 module |
| 5 | 8 module |
| 6 | 6 module |
| 7 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required |
| 8 | 3 x 2.5 sqmm |
| 9 | 3 x 4 sqmm |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required |
| 11 | 15/16 amps switch |
| 12 | 6 pin 15/16 amp socket outlet |
| 13 | 5/6 amps switch |
| 14 | 3 pin 5/6 amp socket outlet |
| 15 | S/F of following sizes of heavy class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 16 | 25 mm |
| 17 | 20mm |
| 18 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 19 | Providing and laying connection from earth electrode with 6 SWG G.I. wire in 15 mm dia. G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. |
| 20 | Laying of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 21 | UPTO 35 sq. mm |
| 22 | Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less Direct Currnet ( BLDC) Motor, class of insulation: B3 nos blades, 30 cm long down rod, 2 nos canopies, shackles kit, safety rope, copper winidng , Power factor, not less than 0.9 service value ( CM/M/W) minimum 6.00 , Air delivery minimum 219 Cum/min 350 RPM ( tolerance as per IS: 374-2019) , THD less than 10% remote of electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C ( max) insulation resistance more than 2 mega ohm, suitable for 230 volt 50 HZ single phase 415 volt AC supply , earth |
| 23 | S/F/T/C of pre-wiredof single box type fitting complete with one no. LED tube of frosted cover design 1 watt 2100 lumens 50000 burning hours size 1200mm completeall accessories i/c directly on ceiling wall includingconnection with 1.5 sqmm FRLS PVC insulated copper conductor cable and earthing etc as reqd. fitting equivalent to philips make Cat no. TMC 502 1 x t -LED 22W, Tube equivalent to philips make Cat no. MAS tube 1200 mm 18W865 T81-2100 lm |
| 24 | S/F/T/C of pre-wiredof double box type fitting complete with Two no. LED tube of frosted cover design 1 watt 2100 lumens 50000 burning hours size 1200mm completeall accessories i/c directly on ceiling wall includingconnection with 1.5 sqmm FRLS PVC insulated copper conductor cable and earthing etc as reqd. fitting equivalent to philips make Cat no. TMC 502 2 x t -LED 22W, Tube equivalent to philips make Cat no. MAS tube 1200 mm 18W865 T81-2100 lm |
| 25 | S/I/T/C of 150 watts flood light fitting 5700 K pressured dia cast housing with IP65 protection efficient high 220-240V output emitter LED for better distribution with dimension 447 X 163 x 327 mmand 6500 colour with lumens 15000 with all accessoires etc as etc as reqd. at site. ( model no BVP410 LED 150 CW HE NB FG S4 XTFCL) ( Philips ) |
| 26 | Supplying of one number XLPE insulatedand PVC sheathed aluminium armoured conductorpower cable confirming to1.1 KV grade of following size etc as reqd |
| 27 | 4 x16 sqmm |
| 28 | Supplying and fixing of street light pole box of size ( 250 x 200 x 100 ) complete with all accessories i/c suitable clamps, suitable bakelite sheet, brass screws , washers and 1 nos SPCMB 10 amps capacity i/c making connection etc as reqd. at site. |
| 29 | Providing and fixing exhaust fan 900 RPM with all accessories and making connection etc as reqd if wooden work is reqd |
| 30 | 12\" exhaust fan |
| 31 | 18\" exhaust fan |
| 32 | Supplying, testing and commissioning of HOP dip galvanized octogonal steel pole of 5 mtr height made out of 3mm thick sheet PCD 200mm, having bottom 130mm A/F & top 70 mm P/F with built in connector box of size 500mm length , M.S. base plate of size 200 mm x 200 mm x 12mm thick to accomodate the fitting on existing RCC foundation i/c S/F of 4 Nos. M-16 x 450 mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc. complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos. mounting strips with tapped holes (a) 6mm thick phjenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flsh door (b) S/F of Terminal block suiable for 16 sq.mm conductor 4 Nos. & shorting links- 5 Nos. on DIN channels (c ) Terminal suitable for 6 SWG G.I. wire/ 1.5 sq.mm wire (d) 6 amps SP MCB 10 KA \"C\" series - 1 Nos. i/c mounting on DIN Channe This includes making foundation of size 1200 mm x400 x 400mm made of cement concrete 1:3:6 ( 1: cement :3 coarse sand :6 graded stone agregate 40 mm nominal size ) with provision of IN and OUT slot for cable entry including excavation and refilling etc as reqd (Make: Bajaj/ Transrail/Jindal/Tata) |
| 33 | Supply, installation, testing and commissioning of pre-wired, 150 watt, street light delievering 120 lumens/watt, IP 66 protection, PDC housing and high impact resistance (IK07) glass cover lumimiare 220-220V, 50 hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent Model of Thorn/Trilux) |
| 34 | Supplying and fixing of 500 mm long Over hang single arm bracket made of suitable dia G.I pipe and suitable for 70 mm dia G.I pole including nut bolts etc as reqd. at site ( Make Bajaj/Paruthi/Surya ) |
| 35 | S/F/I/T & commissioning of 1 HP Direct on line starter with sheet steel enclosure for 1 phase 220 v complete set with contactor and OLR start, stop ,push button with indication lamp , voltmeter, ampmeter including mounting arrangement of starter with all accessories etc as reqd. at site ( Cat no. IHSDOAJ1FD or equivalent model of crompton/BCH Electric) |
