|
| 1 | A) Dwarf wall, CC platform for gazebos-Construction of Dwarf wall for earth retaining as per the drawing no MUM/340/2022 in Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand), excavation in all kind of soil, laying Plain cement Concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm) as bed concrete and coping in 150mm thickcement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete as per the direction of Engineer-in-charge.( dwarf wall as per drawing and plastered on all three exposed sides with CM 1:4 and 15 cms below the offset) |
| 2 | Earth work in rough excavation All kinds of soil, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer withpower road roller |
| 3 | Dry stone pitching 22.5 cm thick including supply of stones and preparingsurface complete as per the direction of Engineer in-charge. |
| 4 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete including laying, compacting, curing with materials, tools, labours etc. complete as directed by the engineer in charge but excluding the cost of centering and shuttering |
| 5 | Providing and laying in position, Centering and shuttering including strutting, propping etc. and removal of formincluding supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge.5.9.1 - for Foundations, footings, bases of columns, etc. for mass concrete |
| 6 | B) Kerb wall for pathways, and paver blocks over platform, road -Earth work in rough excavation All kinds of soil, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller for kerb wall |
| 7 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete including laying, compacting, curing with materials, tools, labours etc. complete as directed by the engineer in charge but excluding the cost of centering and shuttering |
| 8 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete (test cerificate for M30 from the manufacture is required) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 9 | Providing and laying 60mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern, factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge |
| 10 | C: Horticulture works in four sections-Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure) 78.10*1.18 |
| 11 | Supplying and stacking of good earth at site including royalti and carriage upto 5 kms lead complete. ( Earth measured in stacks and will be reduced by 20% for payments ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time) 515.60 x 1.18 |
| 12 | Supplying and stackingScreened through sieve of I.S. designation 4.75 mm at site dump manure from approved source, including carriage upto 5 km lead complete as perdirected Engineeer incharge(manure measured in stacks will be reduced by 8% for payment) :319.80x 1.18 |
| 13 | Mixing earth and sludge or manure in the required proportion and Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time) 36.55*1.18 |
| 14 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)including all Materials labours & tools etc.and as per direction of the Engineeer in- charge ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time) 7.55*1.18 |
| 15 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time)214.40*1.18 |
| 16 | Providing and Displaying Mascarena palmwell developed with fresh & healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as per direction of the officer-in-charge. ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time)1845*1.18 |
| 17 | Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm complete as per direction of the Engineer -in-charge.( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time) 100*1.18 |
| 18 | Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. ( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time)538.15*1.18 |
| 19 | Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm complete as perdirection Engineer-in-charge.( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time)120*1.18 |
| 20 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieablematerial’sincluding all Materials labours & tools etc. complete as perdirected Engineeer incharge (excluding cost of plant & water)( Rate from 2020 Horticulture DSR plus 18 % GSt as GST was not applicable at that time)7.30*1.18 |
| 21 | Complete maintenance for six months of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge for Play grounds / Public parks (1Mali for 2.00 Acre).4.80*1.18 |
| 22 | D) Components for Children play area-Providing and fixing economy swing of size 8 ft x 8 feet ( product code SW11) of playglobal garden equipment manufacturing as shown in picture |
| 23 | Supply & Installation of FRP Fish Design Garbage Dustbin at Luhara Lighthouse stationincluding loading and unloading and transportation of materials etc. completeas per directed by Engineer in charge.(All pipes GI \"C\" ClassPipes, PP Powder coating, FRP Material Like Gelcoat & Resin are of Sateyn brand, Matt |
| 24 | Supply & Installation of Antique Casting Iron VIP Bench 3 seaterat Luhara Lighthouse stationincluding loading and unloading and transportation of materials etc. completeas per directed by Engineer in charge.(All pipes GI \"C\" ClassPipes, PP Powder coating, FRP Material Like Gelcoat & Resin are of Sateyn brand, Matt |
| 25 | E)Gazebos ready to install (All other works included in the estimate)-Supply of hexagonal Gazebo is made out of marine grade composites (marine grade corrosion resistant & Hydrocarbon solvent resistant). The Inner Column Frame made of 76 mm OD mild steel pipe as per IS: 1161 or IS:1239 hot dip galvanized 65 microns, post fabrication. The gap between galvanized pipe & the FRP camouflaged shall be supported with proper frame work for better stability. The HDG Pipes & cladded with glass reinforced polymer using Unsaturated Polyester resin along with 300 & 450 GSM Emulsion Chopped Strand Mat comprising Viscosity @25°C should be 300 to 400 cps with Acid Value of 25 mg KOH/g. Volatile Content of 35%. Specific Gravity 1.12 @25°C. Barcol Hardness of 30-35, heat deflection temperature of 60-63°C ,weather ability, heat resistance, chemicalresistance, and electrical properties. The Glass Fibres complies with DIN EN-2.2 & DIN EN 10204-3.1. The camouflaged FRP grooved column is 90mm OD. The top roof of the gazebo shall be designed to have proper rain protection during the rainy season and shall be assembled at site with the help of modular bracket with suitable SS hardware. PU paint treatment for a classic surface finish.. All hardware is of stainless steel. The product is an all Weather proof & Maintenance free. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade UV. Stabilized PU paint with UV stable Polyurethane 120 S+/-5 viscosity aliphatic paint, with minimum standing life of 5 years. These gazebo post shall be individually hand crafted to replicate steel and cast iron. All hardware is in SS .The size of the Gazebo shall not be less than W4350mm X 4350mm. please refer the attached drawings for more reference.( product brochure attached) |
| 26 | Providing and fixing of FRP 2 windows square Security Cabin (GEM Product id 5116877-27178978599) height of 7.1 foot with 3 mm FRP layer, MS Angle, window type shall be powder coated aluminium sliding window with 4mm thick glass, finishing shall be polyureyhane paint including supply of all labours, materials, tools & plants etc. complete as directed by engineer in charge at Luhara Lighthouse station |
| 27 | F)Electrification work of the designated tourism area-Supplying and fixing following size/modules, GI box/Surface Plastic box alongwith modular base & cover plate for modular switches in recess etc.as required.12 Module |
| 28 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc.as required. |
| 29 | 5/6 A switch |
| 30 | 15/16 A switch |
| 31 | 3 pin 5/6 A socket outlet |
| 32 | 6 pin 15/16 A socket outlet |
| 33 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 34 | Supplying and fixing brass batten/Angle holder including connection etc. as required. |
| 35 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 36 | Installation, Testing and Commissioning of wall bracket/ceiling fitting of all sizes and shapes containing upto two GLS/CFL/LED lamp per fitting, complete with all accessories including connections etc. as required (For Bulkhead, fitting must by carried out on wooden patia) (01nos Bulkhead). |
| 37 | Installation, Testing and Commissioning of Pre-wired,fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 38 | Installation, Testing and Commissioning of ceilling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, etc. as required. |
| 39 | Supplying and fixing of following sizes of medium class PVC conduit/cassing capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.-25 mm |
| 40 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 41 | 2 x 1.5 sq mm( For Tube light & Lamp Holder). |
| 42 | 3 x 1.5 sq mm( For Fan ,Ceiling Light &Bulkhead Light). |
| 43 | 3 x 2.5 sq mm . |
| 44 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,\"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.-Double pole (32A) |
| 45 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required-Upto 35 sq mm. |
| 46 | Erection of Metalic Pole of following length in cement concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc.as required(with J bolt)-above 4.5 meter and up to 6.5 meter |
| 47 | Supply of power cable 3C/2.5 sqmm,1.1 KV grade, multistranded copper conductor, XLPEarmoured cable. Finolex, Polycab or Havels |
| 48 | Supply of power cable 3C/4 sqmm,1.1 KV grade, multistranded copper conductor, XLPEarmoured cable. Finolex, Polycab or Havels |
| 49 | Supply of power cable 3C/2.5 sqmm,1.1 KV grade, FRLS, multistranded copper conductor, XLPEFlexible cable. Finolex, Polycab or Havels (for internal wiring of Decorative Lights) |
| 50 | Supply of LED Tube light fitting20 W/230 V, 4 ft in white colour etc. any reputed brand. |
| 51 | Supply of Alluminum Bulkhead Light, IP 65 Protection with 10 Watt,230 V,SMD LED Chip. any reputed brand. |
| 52 | Supply of FRP Junction Box with termination, IP66 Protection,Wall Mounted. |
| 53 | Providing and fixing of 15W, 1275 Lumens, Surge-4Kv, Bollard LED fitting mounted on 60Cms Light rotomoulded LLDPE pillar including foundation duly grouted on a concrete base by means of 03/04 Nos of M8x75MM studs with necessary base ring etc. complete. |
| 54 | Supply and Installation of 40W warm light Decorative LED light,SMD LED Chip for Gajebo. |
| 55 | Supplyof Powder coated Cast Iron Decorative light pole with (20-60)W fixture with suitable driver,Dual Arm,SMD LED Chip, 03 Mtrs length with base plate and all accessories on existing foundation. |
| 56 | Installation of 05Nos Decorative Pole with fixtures on existing Foundation,04Nos Antique Lights on existing Gajebo with all accessories including J bolt,nut,bolts etc.complete. |
| 57 | Supplying and embendding following dia HDPE pipe in pole coller/foundation (during casting) for cable entry including bending the pipe to the required shape etc. complete -40 mm dia to 63 mm dia |
| 58 | Supply and Fixing of 5A/230V Holder Adaptor |
