|
| 1 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. SOR 646/2018 Make- UPPWD approved / as per direction of E/I |
| 2 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects SOR 1425/2018 CAT- AAA , Make - Bajaj, Cromption, Polycab, Philips |
| 3 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC/Hume/Metal pipe.as directed by Engineer in charge complete in all respect including exavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Complete in all respect SOR 20b.1/2024 Make- UPPWD approved / as per direction of E/I |
| 4 | (i) 16 sq. mm 4 core |
| 5 | (k) 35 sq. mm 3-1/2 core |
| 6 | Supply and earthing of street light pole with 2.5 mtr. Long 20mm dia GI rod including the cost of 6 S.W.G. G.I. earth wire complete in all respect as per direction of E/I. RA |
| 7 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SOR/807/2018 |
| 8 | 15 A TPN |
| 9 | 40 A TPN |
| 10 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. outdoor type with double door arrangement. SOR 811/2018 Incoming -100 Amp MCCB -1 No Outgoning-63 Amp. MCCB-2 Nos., Cat. B. Pannel Cubicle Type |
| 11 | S/F of 1.5sqmm PVC round unarmoured sheathed 2 core flexible copper cable PSR |
| 12 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. CAT A SOR 1002/2018 |
| 13 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR-504/2018 |
| 14 | 16 sq. mm |
| 15 | 35 sq. mm |
| 16 | 70 sq. mm |
| 17 | S/F of Double pole structure of S.P.-55 S.T. pole 11.00 mtr long(227kg ) complete with all accassories including 2 no. 125x65x6mm MS Channal 2.24Mtr long , 2 no. 50x50x6mm MS Channal 3.5 Mtr long & 1 No. 75x40mm MS channal 2.24 Mtr long with paint, grouting &making plinth above 20cm G.L. in 1:3:6 C.C. with excavation and back filling etc. complete in all respect.RA |
| 18 | Supply and laying of 70 sqmm 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. SOR20a.1/2024 |
| 19 | Supply and making outdoor cable end termination with heat srinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 3x70 sq mm. DSR -2022/10.5.1 |
| 20 | S/F of 11kv DO fuse set. Complete in all respect. UPPCL rate |
| 21 | S/F of 11kv TPMO Complete in all respect. UPPCL rate |
| 22 | S/F of 11KV/0.433 KV distribution transformer 50Hz ONAN type star delta connection DYN-11 vector group as per I.S. specification and UPPCL specification Level-2 with approved make . With all accessories capacity 63KVA psr |
| 23 | Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make:-As approved in U.P. P.W.D., & C.P.R.I. Certified. SOR726B/2018 |
| 24 | Supply Laying of HDPE pipe 160 mm dia with albow soceket. Horizontal drilling method in all complete ete. (1300+250)=1550.00 |
| 25 | S/F of 100mm dia G.I. pipe \"C\" class with M.S. clamp fixing with pole for cable etc. complete in all respect. RA |
| 26 | S/F of 20 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip , having pole sheet thickness 4 mm Top dia minimum 150 mm, Bottom dia minimum 360 mm, base plate 32 mm thick, suitable for wind velocity as per IS 875 part 3 and having no circumferential weld with accessories for highmast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch including making suitable foundation as per drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. SOR 21.3.2/2024 |
| 27 | S/L of HDPE (DWC) pipe for road crossing etc. (exept for cable support on pole) at a depth of 750mm below G.L. for LT. cable carriar as per direction of E/I. make Dura line or Rack of Following size. 63/51mm OD/ID. DSR -2022/14.16.1 |
| 28 | S/F of high intensity retro- reflective sheets as per IRC 67-2001 for roundup on octogonal pole with different colours , red on top white in middle and green at bottom with width of 100 mm each complete in all respect as per direction of E/I. DSR 8690/2021. |
| 29 | S/F of factory wired integral LED flood Light luminaries with die cast aluminium housing with toughend glass UV stabilized PC cover and Lenses built with mandatory driver set suitable for 200 watt. Confirming to IP 66 IK 07 and above protection complete in all respect including labour. 20400-24000 system lumens, High Power LED with Lenses, >110 Lm/ W, P.F> 0.95, THD <10% at full load, CRI>70, Potted driver Set in Metal housing (Not Circultory) Phase to Phase Protection at 440V & >300V auto cut and restart feature, 4 KV internal surge protection, with 5 years warrantee. SOR 23.26/2024 Please Enable Macros to View BoQ information |
