|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 2 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 4 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 12 | Ridges plain (500 - 600mm) |
| 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 14 | Dismantling wooden ballies in posts and struts including stacking within 50metres lead. |
| 15 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 16 | 12 mm cement plaster of mix: |
| 17 | 1:4 (1 Cement : 4 Fine sand) |
| 18 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 19 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 20 | 6 mm thick Cement fiber board as per IS: 14862 |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 22 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 24 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 26 | 15 mm nominal dia Pipes |
| 27 | 20 mm nominal dia Pipes |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 29 | 20 mm nominal bore |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 31 | 15 mm nominal bore |
| 32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 34 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 Palverised sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with Pulverised sand including necessary excavation, levelling & dressing & finishing the top smooth. |
| 35 | Providing cement concrete surface drain with CC 1:3:6(1:cement, 3:sand, 6:graded Stone Aggregate 40 mm normal size), including earthwork in excavation, 10 cm thick bed concrete and 15 cm thickside walling, finishing with 12mm thich cement plaster 1:4 and a floating coast of neat cement on top sides and inside disposal of surplus earth etc complete. |
| 36 | 23 x 23cm Surface drain. |
| 37 | Providing and Fixing in position eves or facia board with 18 mm thick wood plastic composite board of 30cm wide including fixing to wooden frame wherever necessary, all complete as directed as directed by Engineer-in-charge. |
| 38 | ELECTRICAL WORKS |
| 39 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 40 | Group C |
| 41 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC Conduit as required |
| 42 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 43 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 44 | Supplying of prewired LED tube light T5 20W/22W (MAKE INTENSO LXS BATTEN 4 FEET 20 W) (Make: Havells\"Polycab/Crompton) or Equivalent to ISI Standarad. |
| 45 | Installation, testing and commissioning of pre-wired, LED FITINGof all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 46 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB /Isolator) |
| 47 | 6 way, Double door |
| 48 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 49 | Single Pole MCB |
| 50 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 51 | 40 Amps, 2 Pole Isolator |
| 52 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 53 | Supplying ofLED Lamp 9W(Make: Bajaj/ Havells /Usha /Orient/Crompton or equivalent to ISI standard) |
| 54 | Supplying and fixing rewirable porceline with fuse unit of 32 to 40 amps on energy meter board. |
| 55 | Supplying and fixing of Wooden meter board of Size 10\" X 12\" for fixing of Energy meter or equivalent to ISI standarad. |
