|
| 1 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 2 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. |
| 3 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.meters and under, including cuttingthepatchinpropershape, rakingout jointsand preparing and plastering the surface of the wall complete, includingdisposal of rubbish to thedumpingground, all complete as per direction of Engineer-in-Charge.Withcementmortar 1:4(1cement : 4 fine sand). |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand pering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 7 | Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work:100 mm diameter pipes. |
| 8 | Grading roof for water proofing treatment with Cement mortar 1:4 (1 cement: 4 coarse sand). |
| 9 | Neat cement punning. |
| 10 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification. |
| 11 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/window/ clerestory window. |
| 12 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 13 | 12 mm cement plaster of mix:1:4 (1 cement: 4 fine sand). |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement andmatching pigments etc., complete complete.Size of Tile 600mmX600mm. |
| 16 | Dismantling old plaster or skirting raking out joints andcleaning the surface for plaster including disposal ofrubbish to the dumping ground within 50 metres lead. |
| 17 | Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with waterabsorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cementmortar 1:3 (1 cement: 3 coarse sand), jointing with greycement slurry @ 3.3 kg/sqm including grouting the jointwith white cement & matching pigments etc. complete .Size of Tile 600x600 mm. |
| 18 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer . |
| 20 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore. |
| 22 | Providing and fixing 8 mm dia. C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 23 | Providing and fixing 600X450mm beveled edge mirror of superior glass of complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 24 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threadedfittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one stepCPVC solvent cement and the cost of cutting chasesand making good the same including testing of jointscomplete as per direction of Engineer in ChargeConcealed work, including cutting chases andmaking good the walls etc. 20 mm nominal outer dia. Pipes. |
| 26 | Providing and fixing soil, waste and vent pipes :100mmSand cast iron S&S pipe as per IS: 1729. |
| 27 | Providing and fixing soil, waste and vent pipes :75 mmSand cast iron S&S pipe as per IS: 1729. |
