|
| 1 | Supply,Installation,testing and Commissiong of 16 meter height raising/lowering type hot dipped galvanized High Mast shaft in two section with top dia and thickness 150 mm, 3mm respectively and bottom dia 360mm, 4mm respectively suitable for wind velocity as 55 m/ sec,alongwith Head frame sliding galvanized lantern carriage capable of moving up and down the mast complete with self aligning mechanism guides and capable of receiving 10 Luminaire,raising lowering system comprising double drum winch, 6mm diameter SS wire rope,ERP insulated 5 Core 4 Sqmm PVC Sheathed Trailing cable,Connectors as required,Integral power tool three phase motor,manual handel, junction box,Heavy gauge hot dip galvanized lighting finial for protection of High Mast,lightning finial/spike with 1Cx35 sq. mm Copper flexible cable shall be used as a down conductor from lightning finial to the bottom of High Mast,foundation bolt manufactured from special steel along with nuts, washers, anchor plate and common templates,1 No of Double Dome aviation light,Supply of foundation bolts suitable for this high mast manufactured from special steel along with nuts,washers,ancho plates & Templates,Designing & Casting of suitable open raft type RCC shallow foundation with M25 grade concrete (1:1:2) embedded upon plain cement concrete of grade 1:4:8 for High Mast including centering shuttering and steel reinforcement as specified in the drawing or as per the direction of engineer-in-charge suitable for 16 mtr high mast considering the safe soil bearing capacity at size as 10 T/ sq metre at 2 Metre depth including positioning of suitable foundation bolts, nut, washer, pdg straightening cutting, bending schedule & Drawing complete as PVC pipe of 110 mm dia for cable entry upto desired level with all materials and labours, Heavy duty crane as required. |
| 2 | Fabrication, supplying, Installation,testing, commissioning of Double Door front openable outdoor type feeder pillar suitable for 440Volts, 3 Phase, 50 Hz AC supply made out of 2 mm thick CRCA and 300 mm deep with 100 Amp, 4 strips aluminim busbars duly PVC sleeved, making connection, interconnection with solid aluminum bars and providing suitable CC foundation with 50 mm x 50 mm x 6 mm thick angle iron framework with 30 cm legs grouted in foundation, complete with removable gland plates, locking arrangement, earthing and painting etc as required alongwith Provision for 2nos L-Draw Locking System for tender pillarwith 2nos Lock & Key arrangement Completed as required, 32 AMP TPN MCB 1 No, 25 AMPS TP Contactor 1No,09 AMPS TP Contactor 2 Nos ,Single Dial Time Switch 1No,Glass Fuse 1No,Push Bottom 2 Nos,Toggle switch 1No,Neutral Link 1No ,7 Tank chemical treatment powder coated for long lasting finish. |
| 3 | Supplying, Installation, Testing & Commissioning of Flood Light 200 watt, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%,Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management:heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 4 | Supply of 4x16 sqmm PVC insulated & PVC sheathed/XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required direct in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 5 | Laying of one No. PVC insulated & PVC sheathed/XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required direct in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
| 6 | Laying of one number additional PVC insulated and PVC sheathed / XLPE XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 in the existing RCC/ HUME/ METAL pipe as required. |
| 7 | Laying of one number additional PVC insulated and PVC sheathed / XLPE XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 (clamped with 1mm thick saddle) on the wall surface as reqd. |
| 8 | Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 9 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 10 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 11 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 12 | Supply Installation testing & Commissioning of Cone LED Bollard suitable for 1X8watts, lumen efficiency >90 lm/W, THD<10%,CRI>70% , this includes cost of 8 watts LEDD lamp, IP66 and IK08 protection against water and impact.,all labour and petty material are required including fixing the fitting on existing plateform. Housing made up of aluminum pipe UV protected pure polyester powder coated grey after phosphochromate treatment It consists aluminum heat sink for effective thermal management, sturdiness & excellent corrosion resistant. Mounting flange of MS sand casting is used at the bottom.Operating temperature: -10 °C to +45 °C ,Operating voltage range: 140 V - 270 V. |
| 13 | Supply of 2x10 sqmm one No. PVC insulated & PVC sheathed/XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required direct in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. |
