|
| 1 | Name of the Monument / Site:Alampur Group of Temples, Alampur |
| 2 | Provision for Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing including cost of labour, conveyance charges, GST, any other applicable charges all as per the directions of the Engineers-in-charge |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)including cost of labour, conveyance charges, GST, any other applicable charges all as per the directions of the Engineers-in-charge. |
| 5 | Provision for Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to f loor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)including cost of labour, conveyance charges, GST, any other applicable charges all as per the directions of the Engineers-in-charge |
| 6 | Provision for Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc complete as directed by the Engineer incharge. |
| 7 | Provision for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 8 | Provision for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 9 | Provision for Plastering to the partition walls including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 11 | Providing and fixing the factory made windows/ventilators it includes cost of all material, labour and conveyance and all other charges etc complete as directed by the Engineers-in-charges. |
| 12 | Providing and laying Vitrified tiles in floor (Toilet floor) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutters only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per the directions of the Engineers-in-charge. |
| 14 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including cost of labour, conveyance charges, other charges if any complete as per the directions of the Engineers-in-charge. |
| 15 | Provision for Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.(Two coats) including cost of labour, conveyance charges, other charges if any complete as per the directions of the Engineers-in-charge. |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 17 | Provision for supply and fixing of electrical items :1\" dia PVC pipe, 20\" length |
| 18 | Provision for supply and fixing of electrical items :PVC bend 1\" dia |
| 19 | Provision for supply and fixing of electrical items :GI 12 modular boards |
| 20 | Provision for supply and fixing of electrical items :GI 8 modular boards |
| 21 | Provision for supply and fixing of electrical items :GI 6 modular boards |
| 22 | Provision for supply and fixing of electrical items :GI 4 modular boards |
| 23 | Provision for supply and fixing of electrical items :GI 2 modular boards |
| 24 | Provision for supply and fixing of electrical items :2.5 sqmm approved quality pvc insulated wire |
| 25 | Provision for supply and fixing of electrical items :1.00 sqmm approved quality pvc insulated wire |
| 26 | Provision for supply and fixing of electrical items :4 sqmm approved quality pvc insulated wire |
| 27 | Provision for supply and fixing of electrical items :ceiling rose |
| 28 | Provision for supply and fixing of electrical items : cross holders |
| 29 | Provision for supply and fixing of electrical items :mcb box 8 module |
| 30 | Provision for supply and fixing of electrical items :isolation 40v |
| 31 | Provision for supply and fixing of electrical items :MCB switch 20amp |
| 32 | Provision for supply and fixing of electrical items :MCB switch 16amp |
| 33 | Provision for supply and fixing of electrical items :switches 10amp |
| 34 | Provision for supply and fixing of electrical items :GI switch 12module |
| 35 | Provision for supply and fixing of electrical items :GI switch 8module |
| 36 | Provision for supply and fixing of electrical items :GI switch 6module |
| 37 | Provision for supply and fixing of electrical items :GI switch 2module |
| 38 | Provision for supply and fixing of electrical items :3pin socket 10amp |
| 39 | Provision for supply and fixing of electrical items :3pin socket 20amp |
| 40 | Provision for supply and fixing of electrical items :LED tube lights 20W |
| 41 | Provision for supply and fixing of electrical items :LED Bulbs 9W |
| 42 | Provision for supply and fixing of electrical items : Exhaust fans 12\" |
| 43 | Provision for supply and fixing of electrical items :Ceiling Fans |
| 44 | Provision for supply and fixing of electrical items :Labour charges for entire Electricity |
| 45 | Provision for supply and fixing of electrical items :Supply and Transportation of star rated Three phase ISI submersible motorpumpset suitable for 6\" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon including cost of the labour, GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 46 | Provision for supply and fixing of electrical items :Supply and Transportation of control panel for three phase submersible motors above 7.5 HP to 12.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark including cost of the labour, GST, and other applicable taxes if any etc. completecontactors and fitted with Legrand make ISI mark MCB etc., complete as per the directions of the Engineers-in-charge. |
| 47 | Provision for supply and fixing of electrical items :Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square threaded, with rubber \"O\" rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes : Ashirvad / Finolex / Waterflo / Apollo / Falcon / Hindware including cost of the labour, GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 48 | Provision for supply and fixing of electrical items :Supply of WPSC (Weather Proof Single Core) ISI mark Alluminium including cost of the labour, GST, and other applicable taxes if any etc. completeWire. Makes : Polycab / GM / Million / V Guard / Gold Medal / Kundancab / HPL/ RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab |
| 49 | Provision for supply and fixing of electrical items :Supply of 3 Core Flat Copper cable of ISI for Submersible Motors.Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab |
| 50 | Provision for Sanitary fittings for toilets : Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 51 | Provision for Sanitary fittings for toilets : Range of four urinal basins with 10 litre white P.V.C. automaticflushing cistern toilets including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 52 | Provision for Sanitary fittings for toilets : White Vitreous China Surgeon type wash basin of size 660x460 mmwith a pair of 15 mm C.P. brass pillar taps with elbow including operated levers toilets including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 53 | Provision for Sanitary fittings for toilets : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 toilets including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge. |
| 54 | Provision for Sanitary fittings for toilets : Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as perdirection of Engineer in Charge. |
| 55 | Provision for Sanitary fittings for toilets : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete asper direction of Engineer in Charge. |
| 56 | Provision for Sanitary fittings for toilets : PVC connection including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 57 | Provision for Sanitary fittings for toilets : Waste water pipe including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 58 | Provision for Sanitary fittings for toilets : Parryware Two way Bib cock G3334A1 including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 59 | Provision for Sanitary fittings for toilets : Parryware Cardiff pro with Hose and Hook ( Spray Gun, HealthFaucet) T9875A1 including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete as per the directions of the Engineers-in-charge |
| 60 | Provision for Sanitary fittings for toilets : Parryware Soap Dispenser |
| 61 | Provision for Sanitary fittings for toilets : Plastic buckets (10Ltr) |
| 62 | Provision for Sanitary fittings for toilets : Plastic Mug |
| 63 | Provision for Sanitary fittings for toilets : Doormats (3X2 Coir) |
| 64 | Provision for Sanitary fittings for toilets : Modiguard Mirror (6X3 ft) (Thickness 5mm)(beveling and fittingcharges) |
| 65 | Provision for Sanitary fittings for toilets : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes as per the direction of Engineer-in- Charge |
| 66 | Provision for Sanitary fittings for toilets : Parryware piller cock |
| 67 | Provision for Sanitary fittings for toilets : Sintex tank(2000L) |
| 68 | Provision for Sanitary fittings for toilets : Labour charges for complete sanitary work |
| 69 | Provision for Sanitary fittings for toilets : Providing and fixing toilet paper holder |
| 70 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 71 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 meters including cost of labour, conveyance charges, other charges if any complete as per the directions of the Engineers-in-charge. |
| 72 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete as per the directions of the Engineers-in-charge. |
| 73 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design |
| 74 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 75 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) |
| 76 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (8.14.1) Red sand stRed sand stone - exposed face fine dressed with rough backing. (8.14.1.5) 30 mm thick including cost of labour, conveyance charges, other charges if any complete as per the directions of the Engineers-in-charge. |
| 77 | Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast. (including cost of labour, conveyance charges, other charges if any complete as per the directions of the Engineers-in-charge) |
| 78 | Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer in Charge (SS butt hinges and SS screws shall be paid separately) |
| 79 | Level) after deductions Qty 1700.761- 450.328= 1250.433) |
