|
| 1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq. mm but not exceeding 120 sq. mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 2 | Above 35 sq. mm and upto 95 sq. mm |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 4 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 6 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 7 | Supplyng and making end termination with brass compression gland with a aluminium lugs for the following size of PVC insulated and PVC sheathed/XLPE heavy duty aluminium armounred UG cable of 1.1 KV grade as required. |
| 8 | 3.5 Core x 35 sq mm (32mm) |
| 9 | Erection of mettalic pole of length exceeding 10 metres but not exceeding 12 metres in cement concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm normal size) foundation with cement concrete collar of size 0.6m dia x 0.6 m height to accomodate the looping type cable end box including excavation and refilling etc. as required. |
| 10 | Above 10.00 metre and upto 12.00 metre |
| 11 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | 63 Amps |
| 13 | Supplying of following sizes XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part I) and IS No: 1554 (Part-I) 1988 as applicable.(make : CCI/ Gloster/ Havells / Polycab/ Finolex. etc as required. |
| 14 | 35sq.mm x 3.5 core |
| 15 | Supplying and Fixing of JETA NEO/AURA 200W LED Stadium light for outdoor made of exclusive innovative die-cast aluminium IP67 outdoor light with high power LEDs as light sourcesuitable for highlighting architectural facade, 100V-320V operating voltage, 110lm/watt, surge protection 6kV to 20kV with optical glass lens and general purpose lighting similar to Havells Ordering Code LHEPCZU7PA6J200 Lamp type 200W 6000K for mounting on 100mm channel including connectiom etc. as required. Make: Outdoor LED Luminaires Stadium/Floodlight/Havells/Bajaj/Crompton/Phillips or equivalent to ISI Standard. |
| 16 | Supplying and fixing of Hot Pressed moulded SMC box of 320 x 280 x180mm to house, 6 to 32 Amps MCB, 63A Isolator, 240/415V, 4 way connector and clamping arrangement for SMC Box alongwithPVC cable gland for IN and OUT cables including cost of all labour charges, screws or nuts and bolts and washer complete etc. as required. (a) SMC box of 320mmX280mmX180mm - 01 No. (b) MCB 6 to 32 Amps - 03 Nos. (c) 63Amps 240/415V 6 way connector - 01 No. |
| 17 | Supplying and fixing of 100mm X 100mm X 10mm GI angle for cross arm size (1.20/1.50 Meter) fixing in GI Pole in which the LED Lights are mounted complete with fixing clamps, bolts, nuts and washer drilling holes for insullator pins, bolts and nuts alongwith painting with two coats of primer and one coat of synthetic enamel paint for finishing purpose etc. as required. |
| 18 | Manufacturing/Fabrication, supplying and Installation of street light pole made out of 100 mm dia class B ISI standard GI pipe 6 mtrs long earth stud and neccesary GI reducer/ coupling fixed with 80 mm dia class B GI pipe 3.5 mtrs long earth stud and neccesary GI reducer/ coupling fixed alongwith necessary clamp and 400mm X 400mm X 12mm thick MS Base Plate welded to bottom of pole along with its necessary nuts and bolts including painting with one coat of mettlic primer and two coats of synthetic enamel paint etc as required. |
| 19 | Supplying and fixing of VTPN MCCB 125A DB-Double Door with enclosure, IP: 43 Protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 Optimum F1+24, 8 Way Distribution Board, Type C, having trip between 5-10 times their rated current, designed to be adjustable and can handle low and high currents. Make: Havells/Legrand/Anchor/Scnider/ or equivalent to ISI Standard. |
| 20 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 21 | 16 way, Double Door |
