|
| 1 | Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 |
| 2 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 |
| 3 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings (As per Mord Sr.No.-11.4 and technical specifications Clause 802, 803, 1202 & 1203) P.C.C. Grade M-10, Nominal mix (1:3:6). |
| 4 | Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing (As per Mord Sr.No.-11.5 and technical specification Clauses 602, 603, 604, 1202 & 1204 (II). (In 1:4 Cement mortar). |
| 5 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C. grade M 20 (1:2:4) |
| 6 | Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure (As per Mord Sr.No.-12.3 and technical specification Clauses 613.4 & 1204. |
| 7 | Construction of Granular Sub Base by providing Well graded material, spreading in uniform layers with Motor grader/Tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with Rotavator at OMC and compacting with Smooth wheel roller to achieve the desired density complete as per Technical Specification Clouse 401 |
| 8 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 1:1.5:3 , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing (As per Mord Sr.No.-6.4 and Technical Specification Clause 1500). |
| 9 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 RCC GRADE M-25 CH 11 |
| 10 | Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1200 CH 11 |
| 11 | Providing steel R.S.Js/built-up steel sections as Channel including cutting, welding/rivetting, hoisting, fixing in position for composite girders with shear connectors complete with painting as per drawing and technical specifications Clause 1205.6 |
| 12 | Supply and fixing of a sign board including necessary supply of all materials, labour, Tools & plants etc. required for proper completion of the workAs Per S.E. (R.E.D.), Saharanpur Sanction |
| 13 | Less 5% Competitive price efficeincy Please Enable Macros to View BoQ information |
