Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Schedule-A (B/R & E/M Works) |
| 2 | Demolition of Cement Concrete (un-reinforced) of any description, not exc 150mm thickness (above or below Ground Level) and removing out side from MoD land complete all as specified and directed. |
| 3 | M&L for 15 mm thick rendering in CM 1:3 on brick/concrete surfaces of sunken slab, mixed with liquid water proofing compound both floor and wall of sunken slab, the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 4 | M&L for PCC 1:5:10 type E2 Using 40mm graded stone aggregate as in filling under floor/sunken slab. |
| 5 | Cutting upto a depth of 2.5cm into concrete/Brickwalls and trimming surface as required,girth exc. 30cm andFixing of 25mm dia GI pipe (med gde) spout of length 45 cm with CM 1:3 as in sunken base. |
| 6 | Dismantling of existing brick tiles in single layers on roof including grass, trees treating with chemical and cleaning the surface and removal out side of MoD land complete all as specified and as directed.Note :Taking down earthng strips and solar panel wires from roof and re-fixing on the same position after APP laying is deemed to be inclusive of rate quoted by the contractor. |
| 7 | Demolition of existing mud in roofs of any thickness including plastering and leeping (whether full thickness removed or only a part thereof)and removing of mud out side of MoD land, (up to 4th storey) all as specified anddirection by Engr in charge. |
| 8 | M&L for Cutting out cracks \"V\" section on existing roofs or terrace cleaning out and filling solidly with a hot mixture bitumen and clean dry sand 1:1 by weight complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 (up to 4th storey) complete all as specified and as directed. |
| 10 | M&L providing cement concrete in roof or mud stops using type B-1, 1:2:4 (20mm graded aggregate)rounded or chamfered on edges or making slop on roof complete (up to 4th Storey) all as specified and as directed |
| 11 | M&L 25 mm, thick PCC 1:2:4 TYPE B-0 (using 12.5 mm graded stone aggregat) as in padding of floor/ roof surfaces finishees even and smooth surface, complete (up to 4th storey ) all as specified and as directed |
| 12 | M&L for 10 mm thick cement plasteringin CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, as per manufacturer instructionfinished even and smooth without using extra cement complete(up to 4th storey) all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 13 | Supply only liquidwater proofing compound |
| 14 | M&L water proofing treatment on roof and sunken portion of floor andvertical surface consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 Kg/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified.(c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/ sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. |
| 15 | M&L for applyingone coat Bitumenwater proofing aluminium heat resistance painton the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/PLASCON or equivalent. |
| 16 | Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete, all as specified and directed by Engr-in-charge |
| 18 | Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included (up to 4th storey) with necessary scaffolding and safety measures) |
| 19 | M&L for 15 mm thick rendering in CM 1:4 on brick/concrete surfaces of wall, mixed with integral water proofing compound, the surface shall be cured and allow to dry, finished even and smooth without using extra cement (up to 4th storey) complete all as specified and directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 20 | M&L for 15mm thick rendering on brick or concrete surfaces in wall surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) |
| 23 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge. |
| 24 | M&L for prepration of new plastered/un plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary (scoffolding 4th storey). |
| 25 | M&L for prepration of new wall surfaces and applying two coats or more distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, over 1 to 2 mm thick birla putty by auto Roller ofrequired shade and colour complete, as per manufacturer\"s specification including necessary (scoffolding 4th storey). |
| 26 | M&L for preparation of newly plastered surfaces of Ceiling, and applying two coat of Oil bound distemper white or colour, over one coat of primer including wall care putty upto 2 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty)by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty, applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 28 | M&L for complete removalof existingtreatment from old decorated plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic smooth exterior paint @ 1.67 Ltr/ 10 Sqm, colour as approved by GE, over & including a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces on ceilings by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 30 | M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified. |
| 31 | M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 32 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing demolished teiles & rubbish off the premises, complete in all respect as specified and as directed by Engr-in-charge. |
| 33 | M&L for 50 mm thick PCC 1:2:4Type B0 (12.5mm Graded Stone Aggregate) as in sub flooretc., including rough top surface to receive floor finish complete all as specified and as directed. |
| 34 | M&L for Ceramic coloured/ printed non-skid tiles of size7-8 mm thick( square / rectangular ) area of each tileexceeding 0.06 Sqm but n. exec. 0.11 Sqmlaid as in floors setting and jointed with neat cement slurry over& including 15 mm thick screed bedding layers of cementmortar1 : 6 and pointed with white or coloured cement to match the shade oftiles complete all as specified and as directed. |
| 35 | M&L for glazed ceramic colour tiles on vertical surface 350 x 250 x 7 to 8 mm/ 450x350x7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over and including 15 mm thick rendering in CM 1:4, complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for 10 mm thick Vitrified light shade Coloured tiles, square/ rectangular double polished, area of each tile n.exc. 0.36 sqm,in floor including 15 mm thick screed bed in CM 1:6 etc.,set and jointed in neat cement slurryand pointed in white with pigment to matchfor laying floor finishes all as specified and as directed by Engr-in-Charge. |
| 37 | M&L for 10 mm thick vitrified light shade coloured tiles (square/ rectangular) double polished, area of each tile not exc 0.36 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surface such as Skirting/ dado etc over and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed by Engr-in-charge. |
| 38 | Demolition of Stone slabs and tiles laid dry of any description or thickness in floors, aprons etc |
| 39 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite over 15 mm thick screed bed in CM 1:4 including grinding, moulding rounnding and polishingbedding as in, window Cill, kichen rounding plateform etccomplete all as specified and directed by Engr-in-Charge. |
| 40 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingfloor surface complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering in CM 1 :4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed by Engr-in-Charge. |
| 42 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each all as specified and as directed. |
| 43 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc 4 sqm each all as specified and as directed. |
| 44 | Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each, complete all as specified and directed by Engr-in-Charge. |
| 45 | Demolition of reinforcement Cement Concrete of any descriptionin any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 47 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 48 | S&F for 35 mm thick flush shutters, solid core construction, with block board and both faces are covered with 0.90 mm thick decorative face veneer with lipping/ frame to match, complete, fixed to chowkatsall as specified and directed by Engineer-in-Charge. |
| 49 | M&L Second class hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I Section - 8 clause 8.24 (a) supplied and fitted to chowkhat. |
| 50 | S&F aluminium colouredpower coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:-(a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd(b) Aluminium colouredpower coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium colouredpower coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium colouredpower coated tower bolt 3 Nos in each window 150 mm long as per spd.(e) Aluminium colouredpower coated handle 2 Nos in each window 100 mm long as per spd.(f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading.(g) Aluminium colouredpower coated grill make deco grill DG-104 fixed with \"H\" Section.Note : If groundrequirement for sliding window/AC windowcontractor should provide as per direction of Engineer-in-Charge without any price adjustment. |
| 51 | S&F in repairs aluminium powder coated Ventilator with Top Hung shutters /fixed type with section of 16 guage including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F PVC Solid moulded Architrave DoorFrame of Size 50X47mm & more made out ofmin 5.0mmColoured with Plastic Trim decoratedPVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructionscomplete all as specified and as directed. |
| 53 | S&F Factory Made PVC Solid moulded Architrave DoorShutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall becovered with heat moulded Plain Colour PVC \"C\" Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed. |
| 54 | S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed. |
| 55 | S&F 150 mm long Aluminium anodised handles, cast type, complete in all respect as speicfied and directed by Engr-in-Charge. |
| 56 | S&F for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head ss screw complete all as specified and as directed by Engineer- in- Charge. |
| 57 | S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and as directed by Engineer- in- Charge. |
| 58 | S&F in repair 300 mm ordinary rat tail rod pattern, brass door spring including roller & roller plate fixed complete of any size complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair PVC frame door seal of size 1 metre long fixed to wooden doors complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair aluminium floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber shoe with over all length of cover plate 140mm complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified. |
| 62 | M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxideprimer complete all as specified. |
| 63 | S&F stainlessSteel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, etc, complete all as specified and as directed. |
| 64 | S&F in repair stainlessSteel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, etc, complete all as specified and as directed. |
| 65 | Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads, complete all as specified and as directed by Engineer- in- Charge. |
| 66 | S&F 04 mm thick Sheet Glass, Ordinary, Glazing as in Window Frames fixed with Wooden oil putty/rubber beads, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed. |
| 67 | Dismantling of boarding, any description, fixed in any position with nails/ screws, complete in all respect as specified and directed by Engr-in-Charge. |
| 68 | S&F 12 mm thick Veneered decorative plywood plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws as in Kichen, Cup Board shutter, shelves etc to timber frame workall as specified and as directed. |
| 69 | S&F2nd class hard wood plain fillets exc 6 sqcmbut n exc 13 Sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete all as specified and as directed by Engineer- in- Charge. |
| 70 | S&F 50 mm long Stainless steel hinges suitable for cupboard complete all as specified and as directed by Engr-in-Charge |
| 71 | S&F Continuous (piano) hinges, mild steel powder coated of 40 mm width of flaps(when open) complete all as specified. |
| 72 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised all as specified and directed byEngr-in-Charge. |
| 73 | S&F 125 mm long Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws. |
| 74 | M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified |
| 75 | S&F in repair, 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered, ISI marked, hoisted and fixed in position including tank nipples of required size and 20 mm bore dia of pipe ball brass valve high pressure with plolythelene float and flynutcomplete all as specified in SSR Part I complete all as specified and as directed. |
| 76 | S&F in repair ball valvehigh pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all asspecified and directed byEngineer in charge. |
| 77 | S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or onWalls, Ceiling or laid in Floors or any other Situ-ation including taking down of old GI tubing complete all as specified and as directed. |
| 78 | S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or onWalls, Ceiling or laid in Floors/walls including Taking down old GI tubing, complete all as specified and as directed. |
| 79 | S&F in repair Fancy type two way Bib tap 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. |
| 80 | S&F in repair Brass CP fancy type Bib taps 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed. |
| 81 | S&F in repair Angle Stop valves 15mm Bore (dia), fancy type,Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule complete all as specified and as directed. |
| 82 | S&F in repair Stop valve CP 15mm bore (Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union,complete all as specified and as directed.. |
| 83 | S&F in repairs, 20 mm Bore gun metalGate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all asspecified and directed byEngineer in charge. |
| 84 | S&F in repair chromium plated shower rose fancy type fixed to 15 mm bore pipe all as directed by Engr-in-Charge |
| 85 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 86 | S&F in repair Stainless steel Towel Rail 600mm Long and 20mm dia, as Approved, fixed complete all as directed. |
| 87 | S&F in repairVitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 88 | S&F in repair 600 mm X 450 mm mirror of 5 mm thick selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed by Engr-in-charge. |
| 89 | S&F PVC cabinet mirror of size 432 mm x 311 mm of selected quality glass, mounted in PVC frame and fixed to PVC plugs with chromium plated screws and properly hanged in the slot at least 02 Nos on back complete all as directed by Engr-in-charge. |
| 90 | M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. (Make :- CERA/PARRY WARE/HINDWARE or equivalent) |
| 91 | S&F Viterious china Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including taking out unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 92 | S&F in repair PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including , complete all as specified and as directed. |
| 93 | S&F Vitreous China 550 x 400 mm Size Oval Shaped Wash Hand Basin White with 32mm dia Brass Chromium Plated Waste Fitting, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed. |
| 94 | S&F in repair Fancy type Pillar Taps mixer 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. make:- Cera, Johnsen, jaguar, Marc. |
| 95 | S&Fin repair 6mm thick glass corner shelf (12\"x12\")with C type Brass CPbracket, complete all as specified and directed by Engr in charge. |
| 96 | S&F in repair, 6mm thick Glass shelf (6 x 22 \") with Brass CP Bracket , brass nut, SS railing complete all as specified and directed by Engr in charge. |
| 97 | S&F High pressure PVC connections pipe 600mm long suitable for Hot and Cold water for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge. |
| 98 | Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortarup to 100 mm dia and removing to store. |
| 99 | S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door |
| 100 | S&F 100mm dia CI bends, diminishing pieces or tapers (larger bore measured) |
| 101 | S&F 100 mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door |
| 102 | S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls |
| 103 | S&F 75mm dia CI bends with oval access door, diminishing pieces or tapers |
| 104 | S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door |
| 105 | S&F PVC (SWR) Pipes 110mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls/Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed. |
| 106 | S&F 110 mm dia PVC (SWR) Bend suitable , complete all as specified and as directed. |
| 107 | S&F PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls/Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed. |
| 108 | S&F 75 mm dia PVC (SWR) Bend , jointing with s, complete all as specified and as directed. |
| 109 | S&F 75 mm dia PVC (SWR) Tee with access door , complete all as specified and as directed. |
| 110 | S&F in repair stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe |
| 111 | S&F in repair 100mm CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after fixing complete all as specified and directed by Engr-in-Charge |
| 112 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 113 | S&F in repair25mm dia aluminium powder coated Curtain rod with decorative nobes on both side includingMS bracket for fixing in the wall by drilling and fixing wooden gutties all as specified and directed by Engr-in-charge |
| 114 | S&F in repair Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling, UPVC’ 32mm bore Waste Pipe and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge. |
| 115 | S&F in repair, Stainless steel Plate rack of size 30/31\"x36/37\"x10\"(all dimensions in inches) complete all as specified and directed by Engr in charge. |
| 116 | Demolition of Cement Concrete reinforcement roof, floor (Other than ground floors), beams , staircase, landing, chajjas and similar suspended works etc. |
| 117 | M&L for RCC (Nominal mix) type B1, 1:1 1/2:3 (20 mm graded aggregated) asin slab supported walls, beams and columns in floors, roof, landing, balconies,chajjas, conopies, cooping deck slab and selves and the like. |
| 118 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge. |
| 119 | Excavation in post holes not exc 0.5 Cum, getting out, returning filling in layers n exc 25cm in thickness and removing surplus soil to a distancen exc 50 surface in hard/dense soil, complete all as specified and directed by Engr-in-Charge. (Note :- Rate included for four storey building including scaffolding and all safety measures). |
| 120 | M & L for PCC 1:2:4 Type B1 (using 20mm Graded stone aggregate) as in for fixing posts, bed plates, anchor blocks, corbels, brackets, including necessary form work etc. complete all as specified and as directed by Engr-in-Charge. |
| 121 | M&L for Mild steel angle iron as in posts, strutsin fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh and wire any type) ncluding all necessary drilling, bolting or riveting and embedding in concrete and Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-charge. |
| 122 | M&L for MS bars 10mm dia as in stiffener to chain link fencing incl necessary cutings, bending, etc. confirming to Fe-250 and over cut to length, bent to shape required inclundind cracking, bending, spirally hooping with MS wire (annealed), complete all as specified and directed by Engr-in-Charge. |
| 123 | S&F chain link fencingMS galvanised, 75 x 75 mm mess with of 4.00 mm dia mild steel Galvanised wire, lapped straining and binding with incl GI wire (annealed) not less than 0.9 mm dia including provision of binding wire, complete all as specified and as directed by Engr-in-Charge. |
| 124 | Supply and fixing of mild steel screw bolt (machine made) of 11 to 15 mm neak diameter with hexaganal or squre head and bun end.screw other or screw both end,each screw and to be fited with wisher and one hexaganon or squre nut.exc.5cm and n.exc. 10 cm long, complete all as specified and directed by Engr-in-Charge. |
| 125 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). |
| 126 | Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner).Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:-(i)Adequate lap length shall be provided as per IS-456-2000.(ii)Reinforced TMT bars where incorporated in work will be paid under the relvent items. (iii)The work shall be carried out upto four storied building with scaffolding and in patches as directed by Engr-in-charg e. (iv) Rate for scaffolding and formwork wherever required and as directed to be included in quoted rate. (v) The works will be executed in different buildings and at scattered locations. |
| 127 | M&L for broken stone or boulders hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 100 mm thick, watered and rammed to a true surface. |
| 128 | M&L for 75mm thick cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate ) as in sub base of floor path and hard standing complete all as specified and directed. |
| 129 | M&L for 75 mm thick cement concrete 1:2:4 type B-2, (using 20 mm crushed and graded stone aggregate) on path, complete in all respect as specified and directed. |
| 130 | M&L Chequred cement concrete tiles 30 cm x 30 cm x 30 mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6complete all as specified. |
| 131 | M&L for gunntling to RCC works in column, beams, slabs, chajja, ceiling, facia landing , balconies and similar work etc by removing/dismantling of RCC (loose concrete) including plaster and cutting of steel bar including cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fisng with sufficient fastners/concrete nails/welding at regular intervals welded steel wire mesh 50mmx50mm with 4mm dia steel wire as faces/drops and applying epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikaa. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm with varying thickness from 25mm to 100mm as per requirement at site gunniting in cement mortar (1:2) (one pat of cement and two part of ghaghar sand) and plastering in cm 1:4 to a uniform surface, wherever required at any height, location and positon complete all as specified and directed.Note: (i) After placing the additional reinforcement all conrete surface shall be thorughly scrubbing with. (ii) Additional reinforced TMT bars were incorporated in work however min 20mm cement plaster in 1:4 and necessary concrete wks related to gunniting to be included in quoted rate. (iii) Gunniting at Ground floor to 4th storey (iv) Anti corrosive protective coating for reinforced bars. (v) Work to be carried out as in patches as directed by Engineer-in-Charge. (vi) Rate for steel scaffolding and formwork wherever required and as directed to be included in quoted rate.(vii) All demolished material removed from MoD land completelyto any location as per NGT Norms.(viii) The work will be executed in different buildings and at scattered locations. |
| 132 | M&L for welding in repairsthickness of Metal to be welded n.exc 6mm |
| 133 | S&F Brass Hat Pegs, Solid body, 175 mm to 250 mm and fixed, complete in all respect as specified and as directed by Engr-in-Charge. |
| 134 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete. |
| 135 | M&L for along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 136 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 137 | Dismantling and re-fixing of existing IGL PNG pipe lines and meter box with reqd materials by M/S IGL only, complete all as specified and directed by Engr-in-charge. |
| 138 | Removal of demolished bldg materials including loading, unloading and stacking at destination, distance more than 05 km and up to 10 km as per NGT norms complete all as specified.Note:-(a) The quoted rate shall be inclusive of carrying out work upto 15m height of building. (b)Water is not supplied by the MES. Water will be arranged by contractor and contractor should produced all necessary Test Certificates for portable water fit for construction and rehabilation as per relevant IS. Rate of Water tankerand rate of water testing are inclusive in quoted rate.(c) All debris will be removed from MoD land as per NGT Norms.(d) The contractor should make good of any damaged and disturbed surface and clean all cement/guniting etc patch on windows/doors/and all surface. |
| 139 | Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed |
| 140 | Taking down copper/aluminium submain wiring complete, including conduits of any kind, and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed |
| 141 | Taking down main switches, distribution boards etc of any type and capacity along with the existing boards including MCBs/MCCBs and removing the same from site and making good the disturbed surfaces/portion of walls etc. all as directed. |
| 142 | Taking down fluorescent tube light fittingsof any wattage or size and deposit to MES store or for taking credit complete all as specified. |
| 143 | M & L for concealedpoint wiring for light pointwith 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly,including sunksheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface ,including laminated hylum sheet cover, ISI marked of Make\" Hylem\" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule.Rate includes chase cutting for concealed wiring Make of Cable : Polycab/ L&T/ Havells |
| 144 | All as per item No. 142 here-in-before but for one fan Point controlled by one way switches, with cables 1.5 sqmm complete all as specified and directed. |
| 145 | All as per item No. 142 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed. |
| 146 | M & L for point wiring (concealed on wall & surface/concealed on cealing) for bell point controlled by one modular/piano switch one way in different locations/building including rigid non metallic PVC conduit, medium grade, ISI marked , 20 mm dia, with 1.5 sqmm FRLS PVC insulated & unsheathed,stranded copper conductor of 1.5 sqmm as continuous earth connected to common earth dolly,complete all as specified and directed by Engr-in-charge. |
| 147 | All as per item No 145 above but for 5 Amps 5 Pinsocket outleton the same board |
| 148 | All as per item No145 above but one 5 pin, 5 Amp socket outleton independent board not below the switchboard of thelight point in the same vertical plane. |
| 149 | All as per item No 145 above but one 5 pin, 15 Amp socket outleton independent board for power point with 2.5 sqmm size copper wire |
| 150 | All as per item No 145 above but One light point controlled by two 2- way switcheswith cables 1.5 sqmm size copper wire. |
| 151 | S& F ceiling rose, 2 to 3 terminals complete all as specified and as directed . |
| 152 | S&FModular switch, one way 6 Amps , 1 module as specified. |
| 153 | S&F Modular Socket , 6 A-2/3 Pin combined 2 moduleall as specified and directed. |
| 154 | S&F switch modular one module 2 way 6Amps complete all as specified and directed. |
| 155 | S&F Modular Bell push 6 Amps , 1 module as specified. |
| 156 | S&F bell multi music type single phase allas specified. |
| 157 | S&F twin socket modular type heavyduty out let 6 pin 6/16 Amps 2 module, |
| 158 | S&Fswitch Modular type 16 Amps , single pole one way 240 volts one module as specified. |
| 159 | S&FModular Fan stepRegulator Bell ,120 W-2 module as specified. |
| 160 | M&L for metal flush box for fixing of switches for 1/2 module |
| 161 | M&L for metal flush box for fixing of switches for 3 module |
| 162 | M&L for metal flush box for fixing of switches for 4 module |
| 163 | M&L for metal flush box for fixing of switches for 6/8 module |
| 164 | Supply & fix Modular White cover plate with frame for 1/2 module |
| 165 | Supply & fix Modular White cover plate with frame for 3 module |
| 166 | Supply & fix Modular White cover plate with frame for 4 module |
| 167 | Supply & fix Modular White cover plate with frame for 6/8 module |
| 168 | S&FModular type blank plate , 1 module for switch bd/DB box blank space allas specified. |
| 169 | Taking down water heater storage type electric capacity 25/50 liters and refixing the same after repair of the bldg on same location including cleaning of the geyser body complete. |
| 170 | Supply and fix PVC ventilating fan AC single phase 230/240 volts of size 200 mm sweep with louvers and connecting upincluding provision of cable from ceiling rose to connector to exhaust fan also including make suitable size hole on wall/window as per site requirement.Make: Havells/Bajaj/Usha/Orient/Orision. |
| 171 | Supply & fix sheet metal enclosurefor220 volts 20 Amps with a three pin and earth plug top with socket and one single pole MCB20 amps complete as well as specified and directed. |
| 172 | Taking down of serviceable ceiling fans/wall mounted fan and refixing the same on same position including painting of any type of fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etccomplete all as specified. |
| 173 | Taking down of serviceable Exhaust fans and refixing the same on same positionincluding painting of any type of fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etccomplete all as specified. |
| 174 | S&F Sheet metal enclosureDouble doorSPN 240 Volts 12 way DB with 200 Amps rated busbar complete all as specified and directed. |
| 175 | S & F sheet metal enclosure for MCB, DB, VTPN 415 Volts 200 amps rated busbar 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43with MCB as incommer and MCB SP/TP in outgoing complete all as specified and directed by Engr-in-charge. |
| 176 | S&FMCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .Make |
| 177 | S&F RCBOs for earth leakage, overload and short circuit protection double pole 30 mA ,32 Amp 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge |
| 178 | S&F MCB SPN 32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge |
| 179 | S & FMCB TPN 63A Amps 415V 10 KA \"C\" curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. .Make- Legrand/ Seimens/ Schinder. |
| 180 | Material and labour for sub-main wiring with2 runs of6 sqmm FRLS PVC insulated, multi-stranded, copper cable, 1100 V grade, along with one run of 6.0 sqmm copper cable for earth continuity wire connected to common earth dolly (Colour code to be followed) drawn through concealed 20 mm dia, medium grade,PVC conduit, including accessories complete all as specified and directed . |
| 181 | Ditto-above but three run of 4 sq mm complete all as specifed and as directed. |
| 182 | Ditto-above but three run of 2.5 sq mm complete all as specifed and as directed. |
| 183 | S&F in replacement of 4 ft 18/20 watt Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energycomplete all as specified and by Engr-in-charge. |
| 184 | S&F in replacement of 2 feet09/10 W slim LED battern (cool day light) Basic all purpose surface and wall mountedwith polycarbonate housing & integrated with electronic driver. |
| 185 | Supply and fixing LED bldg light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 186 | M&L for bracket made of GI light grade pipe 1 Mtr long of size 32 mm bore bend to shape as per site requirment fixed to building with 40 x 5 MM -02 Nos, size clamps bolts, Nuts, washers incuding painting two coats of aluminium paint over a coat of primerall as specified and directed by E-I-C |
| 187 | M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed. |
| 188 | Supply and fixing ceiling fan complete with blade, down rods, electronic regulator and accessories, 230 V, 1200 MM sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 189 | Takingout old unserviceable LT under ground cable of any size upto 16 sqmmX 4 core all as specifiedand directed. |
| 190 | Supply , Laying , testing and commissioning XLPE insulated and PVC Sheathed , galvanized steel strip or wire armoured , heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade of size 35 sqmm 3.5 core complete all as specified & directed by Engineer - In - Charge. |
| 191 | Excavation in treanches in soft loose /soil not exc 1.5m wide and not exc 1.5m deep and getting out for taking out and laying cables foudation etc.Brick PCC cables protection cover shall be retrieved and kept in safe costody for reuse). |
| 192 | Returning filling in including spreading leveling waterning and well remmaning in layers not exc 25cm thick all as directed . |
| 193 | Removing of surplus spoil to a distnce not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point. |
| 194 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :-Thickness of sand cushioning shall be measured after punning. |
| 195 | M&L for brick protection with sub class \"B\" Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed. |
| 196 | Supply and fixingin replacement of GI tubing, light grade, 50mm bore with all fitting laid in trenches / pole / wall for protection of cables in repairs complete all as specified and directed. |
| 197 | M&L for horizontal boring of size 50 mm dia under road min 0.7 mtr depth above GL by mannual or drilling with out damage the existing road for purpose passing under groud cable as per specified and directed. |
| 198 | Taking up and down 40mm bore steel tubing and connections, and removing materials for taking creditall as specified and as directed. |
| 199 | Taking up and down 25/20mm bore steel tubing and connections, and removing materials for taking creditall as specified and as directed. |
| 200 | Supply and Fix 40 mm dia Galvanised Steel water tubing(ISI Marked ) medium grade with and including all tube fittings and fixtures such as GI bends teeunion etc in trenches/fixed to wall/ fixed on pillercomplete and connecting to water supply pipe line and testing complete all as and as directed. |
| 201 | All as per srl item no.199 but 25 mm dia |
| 202 | All as per srl item no.199 but 20 mm dia |
| 203 | M & L for cutting/threading of GI tubing in position of size 80/40 mm dia pipe for insertion of new Tees, branches etc. of 25/40 mm dia bore dia all as directed. |
| 204 | Taking up old gate valve and S & F New40 mm dia Gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 205 | All as per srl item no.203 but 25 mm dia |
| 206 | Note:- The amount of Rs 50512/- against Schedule of Crediton Srl Page158 to 159shall be deducted from the total amount quoted against Sch \"A\" |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
