|
| 1 | Disconnecting existing PVC water storage tanks of capacity exc 500 Its & n exc 1000 Itrs, setting aside (or lowering if required) for laying of APP memberane or repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 2 | Demolition of Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work disposal off from the premises complete all as specified and directed. |
| 3 | Removing of plants including roots by demolishing of brick work/PCC/RCC in parapet sides,wall , fascia, chajjah,roof including necessary scaffolding, any type, any location/height (i.e roof parapet walls, near pipes etc) and applying acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150) x 200 mm) complete all as specified and directed. |
| 4 | M&L for repairing of R.C.C projections, chajjias, roofs, facia etc in patches not exceeding 3 Sqm in eachSqmpatch by necessary preparation, Scarpping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of cement sturry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and finished with cement and sand motar (1:3) using coarse sand and work in patches including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge.Note: No other extra payment shall made for scaffolding and necessery arrangements for executing the Note: Quated rate shall be deemed to be inclusive of materials and all labours,tools andplants,scaffolding and working upto height 6m etc. |
| 5 | M &L for Reinforced cement concrete type BO 1:2:4 using 12.5 mm graded aggregate as in chajja all as spfd and directed. |
| 6 | Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness,,jointed in any mortar. |
| 7 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 8 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams,etc complete all as specified and directed. |
| 9 | M&L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified Sqm water froofing membran comprssing of following for non-approachable roof:(i)Removal of existing roof treatment/Mud Puska of any thickness and cleaning sweeping and washing and down with water to remove all dust etc from plasted roof surfaces/wall and filling of crack with sealing compound etc.(ii)Bitumen based primer conforming IS 3384-1965 at 0.30kg per sqm.(iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions.(iv)Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification. |
| 10 | M&L 25 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete. |
| 11 | Dismantling structural steel work includingdoors, gates but excluding framed truss etc. |
| 12 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 13 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 14 | S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 17 | Taking down chowket or frame with shutter (without taking off shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each |
| 18 | Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqmeach |
| 19 | M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete, all as specified. |
| 20 | M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 21 | M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. complete all as specified and directed. |
| 22 | M&Lfor 35mm thicksecond class hardwood glazed and skelton doorshutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed. |
| 23 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc.complete all as specified and directed. |
| 24 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed. |
| 25 | All as per item no.23 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet |
| 26 | S &F Factory Made Solid PVC Moulded Door Shutter with partcle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, complete all as specified and directed. |
| 27 | M&L for 32 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sidesincluding 5 mm thick edging/beading on exposed to view on sides & top complete all as specified and directed. |
| 28 | S&F mortise door lock handle set 200mm 1CK gloria 7 pin brass tumbler mechanism 60 mm all as spfd and directed. |
| 29 | M & L for 0.9mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions |
| 30 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section.(iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. complete all as specified and directed. |
| 31 | S & F in repair galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed. |
| 32 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) |
| 33 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) complete all as specified and directed. |
| 34 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position complete all as specified and directed.. |
| 35 | S & F in repair 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule incl nipple, connection pipe,union etc.. and fixed. complete all as specified and directed. |
| 36 | S & F in repair 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule incl nipple, connection pipe,union etc.. and fixed. complete all as specified and directed. |
| 37 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed |
| 38 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified and directed. |
| 39 | S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA)20 mm dia complete all as specified and directed. |
| 40 | S & F in repair of 25mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 41 | S & F in repair 25mm dia bore CPVC ball valve complete. |
| 42 | S& F in repair 20mm dia bore CPVC ball valve complete. |
| 43 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as spdand directed. |
| 44 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete all as spdand directed. |
| 45 | S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 46 | S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 47 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 48 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 49 | S&F as in repair 15mm stop valves cast copper alloy chromium plated fancy type concealedtype screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairscomplete all as specified and directed. |
| 50 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and directed. Make - Prayag/Polytuff/Symet |
| 51 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 52 | S&Fvitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopperincluding brackets or fixed to walls with anchor fastners complete all as specified and directed. |
| 53 | S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 54 | Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. |
| 55 | S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms . |
| 56 | S & F as in repair of whiteseat cover for pedestal pattern water closet including fixing bolts complete. |
| 57 | S&F CP towel rail/ring all as specified acomplete all as specified and directed. |
| 58 | S&F CP toilet paper holder complete all as specified and directed. |
| 59 | Supply & fix in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. |
| 60 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 61 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 62 | S&F in repairPVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 63 | S&Fin repairPVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 64 | S & F in repairof PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door ccomplete all as specified and directed. |
| 65 | S & F in repair of PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal with acess door complete. |
| 66 | S & F in repair 110mm bore PVC (SWR) vent cowl with rubber ring joints,fixed to pipes all as specified and as directed. |
| 67 | S & F in repair 75mm dia multi floor trap with steel chromium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:4 complete all as specified and directed. |
| 68 | Taking down cement plaster any description on brick or stone walls etc including Removing of tree/plant girth not exc 15 cm from wall/roofing including removing all roots ,raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 69 | M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with water proofing compound @ 3 % by the weight of cement(up to four story building) , surface finished even and smooth without using extra cement up to 6.0 m height.(WPC shall be measured and paid seperately |
| 70 | supply only liquid water proofing compound ISI marked. |
| 71 | M&L for rendering 10 mmthick in ceiling on brick work or concrete surfaces in CM 1:4, finished even and fair complete all as specified and directed. |
| 72 | M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 complete all as specified and directed. |
| 73 | M&L for applying a coat of water proof cement base paint onold/new treatedsurfaces of walls after preparation surfaces complete as per manufacturer instruction all as specified and directed. |
| 74 | M&L for 1 mmthick Birlawhite putty/JK white wall care putty on walls/Ceiling surfaces. |
| 75 | M&L for Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 76 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 77 | M&L for Preparation of old decorated surfaces of wallsand applying two coats of distempering with acrylic distemper as per manufacturer instructions white or tinted all as specified and directed. |
| 78 | M&L for Preparationof old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | M&L for Preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 80 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 81 | M & L for parking tileslight shed of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0..06 sqm and n exc.0.16sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 82 | M & L for vitrified ceramic tiles double charge dark shed of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0..42 sqm and n exc.1.0sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 83 | M & L for vitrified ceramic tiles double charge light shed of 7.5 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 84 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM (1:6) including taking down existing tiles. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 85 | M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 300*450 mm 7-8 mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to matchincl 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 86 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed |
| 87 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 88 | M&L Brick work using old size bricks with sub class \"B\" bricks straightor curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed. |
| 89 | S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed |
| 90 | S&F 100mm size stain less steel butt hinges type B-12 all as spfd . |
| 91 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed |
| 92 | S&F 150mm long aluminium anodised handle cast type and fixed D Type |
| 93 | S&F 125mm long aluminium anodised handle cast type and fixed D Type |
| 94 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and coupling complete all as specified and directed. |
| 95 | S&F of stainless steel grade 304 of kitchen plate rack of 750x 900 mm complete all as specified and directed.(make-nirali/prayag) |
| 96 | S&Fstainless steel draphery rod 25-28mm dia fancy type with brackets,decorative end caps coloured to match complete all as specified and directed. |
| 97 | S&Falluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 98 | M&L for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating four grade mixto form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass meshcloth as first coat is still green with overlap of joint of fibremesh not less than 100mm,then finallyapply second layermix by brush to entire surfaceof container covering0.6-0.75Sqm/kgat 1mm thickin two coat dependingon the level of substrate and curing it for minimum 3 days.Note: Quated rate shall be deemed to be inclussive of materials and all laboiurs,tools and plants,scaffolding and working upto height 6m etc. |
| 99 | M&L for solar reflective coated thermoplastic heat resistant roofpaint 1mm thick made with advanced ceramic or acrylic compound complete all as specified and directed. |
| 100 | S&F in repair waste pipe size 32/40mmx800mm flexible with coupling for WHB/urinal etc complete all as spfd. |
| 101 | M&L for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on bothfaces ; fixed with screws to timber frame work complete all as specified and directed. |
| 102 | S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hingecomplete all as specified and directed. |
| 103 | S&F magnets to be used in cabinets complete all as specified and directed. |
| 104 | S & F of stainless steel fancy type handle 150 mm long complete. |
| 105 | Supply & Fixing heavy duty telescopic sliding channel suitable for 18/19 mm thick prelaminated paarticle board/ply board fixed at site as per directed. |
| 106 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x200mm complete all as specified and directed. |
| 107 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x150mm complete all as specified and directed. |
| 108 | S &F as in repair stainless steel grade 304 modular kitchen sheet cuttlerybasket 430x500x100mm all as spfd and directed. |
| 109 | S &F as in repair stainless steel grade 304 modular kitchen trolly plate basket 430x500x150mm complete all as specified and directed. |
| 110 | S &F as in repair stainless steel grade 304 modular kitchen thali basket basket 430x500x200mm complete all as specified and directed. |
| 111 | S &F as in repair stainless steel grade 304 modular kitchen double pull out basket 430x500x200mm complete all as specified and directed. |
| 112 | S&F aluminium profile handle 50x20mm complete all as specified and directed. |
| 113 | S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete all as specified and directed. |
| 114 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directed Make: Hardwyn/Marshal/Sandhu/Universal. |
| 115 | S&F in repair Mortice lock,vertical type size 100mm 2 levers aluminium type complete all as specified and directed. |
| 116 | S & F Century PVC boards Starke prime thickness 7to 8 mm with decoravtive century starline laminates gloss colour wenge brew 80675 G on front of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling and dismantling of existing wall panelling complete all as specified and directed. |
| 117 | S&F of Aluminium powder coated(1/1.2 mtr size) door cills of Any size and descripton complete all as specified and directed. |
| 118 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 119 | M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed. |
| 120 | S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all specified and directed. |
| 121 | S&F in repairof bathroom mirror & cabinet of size 450x600mm.Make prayag cat part no.PTMT-555 or equivalent. |
| 122 | S&F stainless towel rack with lower hanger Make-Jaquar cat part no.AHS-1581 or equivalent to hindware or parryware. |
| 123 | S&F of sink mixerESCCO STE-107309 or equivalent to hindware or parryware Wall Mounted with all assembly complete all as specified and directed. |
| 124 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed. |
| 125 | M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments complete all as specified and directed. |
| 126 | M&L ForChequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments. complete all as specified and directed. |
| 127 | M&L cement concrete (1:3:6) type C2(40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 128 | M&L Sand filling under floors are in foundation including watering and consolidation |
| 129 | M&L PCC (1:2:4) Type B1 (20mm graded agg) as in copings,benching,bed block,lintel band drains and channels etc and similar work incl form work.kerbs and like incl weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 130 | S&Fwater closet pan with unibody including cistern & slim soft closet seat cover complete of make ESCCO ECS-WHT-101853S220SPPSM or equivalent to hindware or payrryware all as specified and directed. |
| 131 | S&F single lever brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete of make jaquar cat part no. OPP-15011BPM or equivalent to hindware or parryware all as specified and directed |
| 132 | S&Fwall mixer 3 in 1 system with provision for both hand shower and overhead shower complete of make jaquar cat part no. FLR-5281N or equivalent to hindware or parryware with 115mm long bend pipe,connection leg & wall flange suiitable for 15mm bore pipe complete all as specified and directed. |
| 133 | M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 litres per square metre of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding or including drilling plugging 12mm dia holes with cement mortar (1:2) to match the existing floors etc complete all as specified and directed. |
| 134 | M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2)to match the existing floors complete all as specified and directed. |
| 135 | M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spfd and directed. |
| 136 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45degree and replugging them with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floors complete all as spfd and directed. |
| 137 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same complete all as specified and directed. |
| 138 | S&F in repair chromium plated soap dish container of make Jaquar cat part no.AKP-35731P or equivalent to hindware or perryware complete all as specified and directed. |
| 139 | S&F in repair chromiun plated soap dispenser with glass bottle cat part no.ACN-1135N or equivalent to hindware or perryware complete all as specified and directed. |
| 140 | S &F as in repair jaquar chromium platedmaze over head shower 300x300mm square shape single flow(body & face plate stainless) with rubit cleaning system including shower arm cat part no OHS-1639 or equivalent to hindware or parryware complete all as specified and directed. |
| 141 | S&F in repair jaquar glass shelf 600mm long with bracket cat part no. CPA-1171 or equivalent to hindware or parryware complete all as spfd and directed. |
| 142 | S&F in repair glass corner shelf with bracket of make Jaquar cat part no. CPA-1171 or equivalent to hindware or perryware complete all as spfd and directed. |
| 143 | S&F in repair 150mm Extruded brass handles,fabricated type polished complete all as specified and directed. |
| 144 | S&F in repair300mm Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. |
| 145 | S&F in repair 150mm Brass barrel tower bolts, with cast or sheet barreland rolled or cast bolts complrtr all as spfd and directed. |
| 146 | S& F 12 mm toughened glass as in Sliding /openabl doors/partition inluding hinges,handles, locking arrangement and similar work including cutting to shape, drilling holes required as directed |
| 147 | S&F vitreous china urinal, half stall type, white including CP coupling waste pipe white, flat back size 630x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed. |
| 148 | M&L for MDF board flooring 8mm thick of any size including damp proof polyethylene membrane and PU foam and adhessive complete all as spfd and directed.Make-Royal touch or equivalent. |
| 149 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
