|
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed. |
| 2 | M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed. |
| 3 | M&L for Premix bituminous macadam with using machanical paving bitumen VG-30 with binder content 4 % of total mix, mixing in hot mix plant and transported through covered vehicle and laid with mechanised paver, rolled and compacted to required gradiaent and camber with power vibrator roller 8 to 12 tonne capacity etc (consolidated thickness 75mmor less) complete all as specified and directed. |
| 4 | M&L for laying Bituminous premix asphaltic dense concrete 40 mm consolidated thickness with 5.50% binder content by weight to total mix using VG 30 paving bitumin by Mechanised paver rolled and compacted to required chamber and gradient complete & rolling to a smooth surface with 8 to 12 tonne power roller complete all as specified and as directed. |
| 5 | M&L for preparing bituminous surfaces of road and marking 1.25mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 6 | M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed. |
| 7 | S & Fin repairs CAT eye (road stud) of size 100 x 100 x 25mm (Model : DA 51) made by polycarbonate moulded bood with electronically welded prismatic retro langeon both sides for max reflection in wet or dry condition to be fixed with bituminous adhesive as per MORTH specifications complete all as specified and directed by GE. Make : Sinor/Dark Eye/3M/Road Knight/Avery Dinnison Road Sign/Greenlite). |
| 8 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed. |
| 9 | S & F in repair of Solar Road stud LED based intelligent road studs of size 125x125x25mm (shank 65mm) (Model DA110-DHRUV) made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continuous lighting at night including fixing with epoxy screed bed all as per manufacturer direction or directed by GE. Make : Sinor/Dark Eye/3M/Road Knight/Avery Dinnison Road Sign/Greenlite). |
| 10 | S & F in repairs for Stainless steel boards of high intensity reflect i.e. single side, sign boards made of hardened ACP sheet 3mm thick POP inverted to stainless rectangular pipe of size 50x25mm frame of size 900x1200mm, frame supported with S/s bolts over 60mm round 3 mtr long stainless steel pipe of 16 gauge with stainless bonded clamps.All stainless steel parts should be polished.Sign boards should be reflective on one side with wide HIP sheet and overlay film or any colour with computer cut letters, sign and bolder two boards on single frame are fixed back to back including necessary excavation and PCC 1:2:4 using 12.5 mm graded aggregate (Size of post holes = 450 x 450 x 600 mm) complete all as specified and as directed. |
| 11 | S&F in repairs for convex mirror of 1000mm Height (Model CM-04, Dark Eye) of Polycarbonate, 1.5mm lens, ABS body, Unbreakable/shatter-resistant, UV stabilized fixed with steel post incl two coat of synthetic enamel paint over a coat of primer and including necessary excavation and PCC 1:2:4 using 12.5mm graded aggregate (Size of post hole 450x450x600mm)complete all as specified and directed by Engr-in-Charge.ake : Sinor/Dark Eye/3M/Road Knight/Avery Dinnison Road Sign/Greenlite). |
| 12 | Surfaces excavation n.exc 30cm deep and averaging 15cm deep and getting soft/loose and removing from site complete all as specified and directed. |
| 13 | M&L for hard core of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 14 | M&L for providing PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base ofPath all as specified and directed. |
| 15 | M&L for 100mm Cement Concrete type D-2, 1:4:8(using 40mm crushed stone graded aggregate) complete all as specified and directed. |
| 16 | M&L Providing and laying 60mm thick (ISI Marked) factory made chamfered edge cement concrete interlocking tiles or paver block of M-35 grade concrete with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc, ofmade by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick (average) compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 17 | M&L Providing and laying 80mm thick factory made chamfered edge cement concrete interlocking tiles or paver block of M-40 grade concrete with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc, ofmade by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick (average) compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 18 | M&L providing and laying at or near ground level factory made kerb stone of M-35 grade cement concrete in position to the required line level and curvatare jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp carve shall not more than 5mm) including making drainage opening wherever required complete all as specified and directed. |
| 19 | M&L for cement concrete (1:2:4) type B1 (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing course, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerb, water throughs, and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 20 | M&L Preparation of new/old surface of concrete or surfaces of any description over 10cm girth or width and applying two coat of synthetic enamel paint over coat of primer of colour as specified and approved by GE. |
| 21 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) including rubbish/demolished meterial from site complete all as specified and directed. |
| 22 | M&L for chequered cement concrete tiles 250mm x 250mm x 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments laid over and including 20mm thick screed bed in cement sand mortar in 1:4 complete all as directed. |
| 23 | S&F in repair manufacturing, supplying and fixing Retroreflective regulatory sign board of size 900 x 1200 mm dia meter made out of 2 mm thick aluminium sheet , face to be fully covered with high intensityenacapsulated lens type retro refective sheeting as approved by Engineer in charge . Letter , symbols ,borders etcwillbe as per IRC -67 with required colour scheme on the boards and with the high intensity grade A . The aluminium sheet to be rivted to MS frame of angle iron of size 40x40x4 mm . the boards will be fixed to 1 no .50x50 mm squre post made of MS angle 50x50x4 mm ,4 m long Welded to the frame with adequate anti theft arrangment . Sheet work to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of GE. |
| 24 | S&F 800 mm dia outdoor type, weather proof, unbreakable polycarbonate face roadside convex mirror for vehicle of high visibility orange visor with floor mount type post and brackets, horizontal and vertical angle adjustment complete all as per manufacturer\"s instructions, fixing to 75mm dia GI pipe 2.10 mtr high in post hole of size 60x60x75cm and embedding the same in PCC 1:2:4 type B-1 using 20mm graded stone aggregate including required excavation, complete all as specified and directed. |
| 25 | S&F in repair ABS engineering plastic road speed breakers dynamically designed having high impact reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and size 750x75x250mm incl fixing with epoxy screed bed all as per manufacturer direction, complete all as specified and directed.Make : Snior / Dark eye 3M Road knight/ Avery Demision Road Sign/Greenlite/Speed Breakers or its equivalent (Model No DA 1006) |
