|
| 1 | Dismantling of cement concrete or brick or granolithic floors including base concrete and including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 2 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 3 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | 12mm cement plaster of mix : 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. |
| 5 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 6 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 7 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) : 3 graded stone aggregate 200 mm nominal size |
| 8 | Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator at OMC and compacting with viberatory roller to achieve the desired density as per clause 401. |
| 9 | Providing and laying of rectified Glazed ceramic tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622, of approved make in all colours, shades except white, grey, ivory, laid on 20mm thick cement mortar 1:4 (1cement : 4coarse sand) , jointing with grey cement slulrry etc all complete. |
| 10 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 11 | Supply and fixing of anodized aluminium partition/ aluminium door having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and locks complete. |
| 12 | Supply and fixing plain glass 4mm thick etc all complete. |
| 13 | S/F of brass bib cock 15mm dia 400gm heavy quality (Gem/mikadeo/Encess\"s williams in all complete. |
| 14 | P/F of P.V.C. low level flushing cistern with ISIS mark quality etc all comlplete. |
| 15 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. But in PVC cunduct with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduct. Wiring points in surface Cinduct with PVC insulated 1100 V grade cable. complete in all respects, a directed. |
| 16 | Supply of L.E.D. bulb etc all complete. |
| 17 | Supply of L.E.D. Tube light etc all complete. |
| 18 | Supply of white glazed earthen ware (Indian type) WC pan 510mm dia etc all complete. |
| 19 | Writing work with skilled painter etc all complete. |
| 20 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
