|
| 1 | Dismantling floor, hearth orwall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqmfloor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl cement screed 15 mm thick in 1:6all as specified and directed. |
| 3 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10mm thick in C:M 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced)in ground floors and paving exc 15cm thick (below or above ground level ) complete all as specified and directed. |
| 5 | M&L removing all dust/dirt from sunken floor and applying two layers of cement slurry mixed with Acrylic based polymer modified cementitiois composite compound coating such as Product like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by FOSROC Chemicals (India) Ltd/Pidilite Industries Ltd/Choksey Chemicas Pvt on concrete/brick surfaces as water proofing slurry coating as per manufacturer,s instructions complete all as specified and directed. |
| 6 | M&L for rendering 20 mm thick in two layers, 10 mm thick each coat with Polymer mortar(cement mortar 1:4 mixed with acrylic based modifiedcementitious composit compound such as product like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by FOSROC Chemicals (India) Ltd/Pidilite Industries Ltd/Choksey Chemicas Pvt on concrete/brick surfaces and finishing surface even and smooth without using extra cement complete. Each layer shall be allowed air cure for 4 hours followed with water curing for 48 hours before applying the second layer all as specified and directed. |
| 7 | M&L for providing 200 micron thick polythene film pasted with the help of adhesive over the treatment plastered surfaces of sunkenfloor complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggrigate) as in foundationfilling and mass concrete complete all as specified and directed. |
| 9 | M&L for 25mm thick cement concrete type \"B-0\" 1:2:4 using 12.5mm graded stone aggregate as in floor and finishing the surfaces fair and even without using extra cement complete all as specified and directed. |
| 10 | S & F in repairs vitreous china ware Wash hand basin flat back white, of size 550 x 400 mm includingcutting for and pinning in ends of brackets or erecting stand but includingwaste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 11 | Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including Plastic water closet seat, black, closed pattern withflat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 12 | S&F in repairs PVC water closet seat cover, white closed pattern with flat bottom and cover and mild steel C.P or Aluminium hinging device for padestal pan complete all as specified and directed. |
| 13 | S&F in repairPVC valveless, syphonic action type, flushing cistern,10 litre capacity low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, complete all as specified and directed. |
| 14 | S&F in repairs vitreous China squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe and provision of concrete bedding complete making good floor all complete all as specified and directed. |
| 15 | S&F in repairs vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all complete all as specified and directed. |
| 16 | S&Fin repairs of Vitreous China bowl urinal flat back size 465x355x265mm white (minimum) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe all complete all as specified and directed. |
| 17 | S&F in repairsurinal spreader of chromium plated push type with PVC pipe of 15mm bore as required complete all as specified and directed. |
| 18 | S&F in repairs Vitrous China urinal partition white of size 310 x 700mm all complete all as specified and directed. |
| 19 | S&F in repair waste pipes32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/Sq. cm as in waste pipe (short length) fixed to wash hand basins and urinals complete all as specified and directed. |
| 20 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted /fixed to wall with 4 Nos of chromium plated brass studs and cup washerswithcomplete including taking down old one all as specified and directed |
| 21 | S/F in repairsbrass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 22 | S&F in repairPVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer all complete all as specified and directed. |
| 23 | S&F in repairPVC connection (high density) 15 mm dia 450 mm with PTMT nuts both ends with rubber washer all complete all as specified and directed. |
| 24 | S & F in repairs angular stop cock (Fancy type chromium plated) 15 mm bore , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 25 | S & F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 26 | S&F in repairs 15 mm bib tap standard of PTMT any colour highpressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms 20mm-125gms) all as specified and directed. |
| 27 | S&F in repair health faucet chromium plated with CP pipe of 1400 mm long with jet spray with PVC chord and connector complete all as specified and directed. |
| 28 | S&F in repairtoilet paper holder vitreous china colour box type complete all as specified and directed. |
| 29 | S & F in repair soap dish vitreous china white of size 160x160x90 mm fixed to plug with chromium plated brass screw complete all complete all as specified and directed. |
| 30 | S&F in repair chromium plated tubular towel rail D type of 20mm bore and 600mm long comlete all complete all as specified and directed. |
| 31 | S&F in repair corner glass shelf of 5mm thick sheet glass of 300 radius with chromium plate bracket guard and railing with alumium alloy bracket , complete all complete all as specified and directed. |
| 32 | Takingdown GI tubing 15mm dia with allconnection all complete all as specified and directed. |
| 33 | All as per item No. 32.00 above, but 20mm dia |
| 34 | All as epr item No. 32.00 above, but 25mm dia. |
| 35 | S & F 15 mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 36 | S & F 20 mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 37 | S & F 25 mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 38 | S & F20mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed. |
| 39 | S & F25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe conceled all as specified and directed. |
| 40 | S & F 32mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe conceled all as specified and directed. |
| 41 | Taking down rain water or soil pipes or PVC pipes including all fittings any size and pattern complete all as specified and directed. |
| 42 | S & F110 mm bore PVC (SWR) , waste and rain waterpipes single socketed in any length with rubber ring joints complete all as specified and directed. |
| 43 | S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any legth with rubber ring joints laid in floors or trenches all as specified and directed. |
| 44 | S & F in repair 110 mm bore PVC (SWR) bends of any radius.with oval access door complete all as specified and directed. |
| 45 | S & F in repair75 mm bore PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 46 | S & F in repair 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal With access door complete all as specified and directed. |
| 47 | S & F in repair 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door complete all as specified and directed. |
| 48 | M & L for 110mm bore PVC (SWR) floor trap plain with brass CP grating including jointing with solvent cement complete all as specified and directed. |
| 49 | M &L for75 mm bore PVC (SWR) floor trap plain with brass CP grating including jointing with solvent cement complete all as specified and directed. |
| 50 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 51 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm thick 1:3 cement mortercomplete all as specified and as directed |
| 52 | S&F in repairs grating roundwith or without waste hole of size 100mm dia, chromium plate complete all as specified and directed. |
| 53 | Cleaning of PVC water storage tanks nexc 500 Ltrscapacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign material etc from inside complete including writing letter on PVC tank as TANK CLEANED ON____Dt, Month and yearcomplete all as specified and directed. |
| 54 | Cleaning of PVC water storage tanks exc 500 Ltrs but nexc 1000 Ltrscapacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign material etc from inside complete including writing letter on PVC tank as TANK CLEANED ON____Dt, Month and yearcomplete all as specified and directed. |
| 55 | Cleaning of PVC water storage tanks exc 1000 Ltrs but nexc 2000 Ltrscapacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign material etc from inside complete including writing letter on PVC tank as TANK CLEANED ON____Dt, Month and yearcomplete all as specified and directed. |
| 56 | S&F in repairs rotational moulded polyethylene new water storage 2000 ltrs cap tanks (cylindrical vertical with closed top)hoisted and fixed in position with necessary fitting including 20mm ball valve, complete all as specified and directed. |
| 57 | S&F in repairs rotational moulded polyethylene new water storage 1000 ltrs cap tanks (cylindrical vertical with closed top)hoisted and fixed in position with necessary fittingincluding 20mm ball valve, complete all as specified and directed. |
| 58 | S & F 25 mm dia gun metal, globe or gate valve with Iron wheel head screwed both ends for iron pipe and fixed in repairs all as specified and directed. |
| 59 | S & F 20 mm dia gun metal, globe or gate valve with Iron wheel head Screwed both ends for iron pipe and fixed in repairs all as specified and directed. |
| 60 | Taking downchowkats or frames notexceeding 1.5 SqM each but (Without taking off shutters from the frame) and removing away from site all complete all as specified and directed. |
| 61 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing on page No-178 of SSR Part-II complete all as specified and directed. |
| 62 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out MS tubes for top and bottom rails MS shall be cuvred with heat moulded plain colour PVC `C` channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing on page No-174 of SSR Part-II complete all as specified and directed. |
| 63 | S&F 75 mm stainless steelbutt hinges fixed with SS screws all complete all as specified and directed. |
| 64 | S&F 150mm aluminium anodized barrel tower bolt of extruded section all complete all as specified and directed. |
| 65 | S&F 125mm aluminium anodized handles, cast type all complete all as specified and directed. |
| 66 | M&L for complete removal of existing treatment of old decorated surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 67 | Taking downaluminum door/window/ ventilator with shutter of any type & position (without taking off shutters from the frame) and removing away from site all complete all as specified and directed. |
| 68 | S&F powder coated anodized aluminium window and ventilator or partition fixed type without sash bar,aluminium section wighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubberpacking and anodised aluminium snap beading screws etc,, complete all as specified and directed. |
| 69 | S&F 4mm thickfigured glass ordinary quality and glazing in frame in square butnexc 0.5 sqm in each pane , complete all as specified and directed. |
| 70 | M&L for complete removal of existing treatment on walls and applying two coatsof distemper oil emulsion over one coat ofprimer with 3mm thick wall care putty on wallcomplete all as specified and directed. |
| 71 | Complete removal of existing treatment on walls and M&L for applying two or more coatsof 100% premium acrylic emulsion painthaving VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces with one coat of birla putty complete all as specified and directed. |
| 72 | Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 73 | M&L forrendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement all as specified and directed. |
| 74 | M&L for rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement all as specified and directed. |
| 75 | M&L forrendering 5mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth(without using extra cement) all as specified and directed. |
| 76 | M&L for preparation of newplastered surfaces of wall and applying two coatsof distemper oil emulsionover a coat of primer with 3mm thick wall care putty on wallcomplete all as specified and directed. |
| 77 | M & L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primercomplete all as specified and directed. |
| 78 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed |
| 79 | M&L for Partition walls with panels of 1.44 sqm (appx.) made out of aluminum powder coatedhollow sections 63.50x38.10x1.95mm thick ,snap fit beading , rubber gasket , 5mm thick sheet glass and 12mm thick prelaminated particle board interior grade , prelaminated one side with decorative chioce lamination and other side balancing light grey lamination including dismantling the damaged partition complete all as specified and directed. |
