|
| 1 | CHAIR DINING, FD- 228,279, 1105Dismantling / taking out carefully existing broken parts of chair dining and supply & fixing new parts in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade and also tightening of loose parts / joints with bamboo pin including fevicol as if required complete all as specified and directedas follows :- |
| 2 | Front leg |
| 3 | Rear leg |
| 4 | Rail (Front/ Rear/ Side) |
| 5 | Back rest |
| 6 | Stiffener (side/ Centre) |
| 7 | PVC Rubber Shoes of best quality |
| 8 | Recanning of repaired chair dining with best quality of approved plastic cane2 mm wide and 0.4 mm thick of white or cream ivory of, complete all as specified , directedand shown on drawing. |
| 9 | CHAIR WRITING, FD-250, 280, 1107Dismantling / taking out carefully existing broken parts of chair writing and supply & fixing new parts in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade and also tightening of loose parts / joints with bamboo pin including fevicol as if required complete all as specified and directedas follows :- |
| 10 | Rear leg |
| 11 | Front leg |
| 12 | Side rail (Front/ Rear/ Side) |
| 13 | Stiffener (side/ Centre) |
| 14 | Back rest |
| 15 | Arm rest |
| 16 | PVC Rubber Shoes of best quality |
| 17 | Recanning of repaired chair writing with best quality of approved plastic cane, 2 mm wide and 0.4 mm thick, of white, complete all as specified , directedand shown on drawing. |
| 18 | CHAIR EASY , FD- 201, 229, 1108Dismantling / taking out carefully existing broken parts of chair easy and supply & fixing new parts made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade and also tightening of loose parts / joints with bamboo pin including fevicol as if required complete all as specified and directedas follows :- |
| 19 | Leg of chair easy (Rear / front) |
| 20 | Front rail for seat |
| 21 | Side rail for seat |
| 22 | Rear rail for seat |
| 23 | Top/ Bottom Rail for Back |
| 24 | Left/ right side Rail for back |
| 25 | Bottom Stiffener |
| 26 | Arms |
| 27 | PVC Rubber Shoes of best quality |
| 28 | Recanning of repaired chair easy with best quality of approved plastic cane2 mm wide and 0.4 mm thick of white,(seat & back) complete all as specified , directedand shown on drawing. |
| 29 | STOOL DRESING CB, FD-27, 252, 282Dismantling / taking out carefully existing broken parts of stool dressing CB and supply & fixing new partsas shown in drg, preparing and polishing new parts to match the existing shade and also tightening of loose parts / joints with bamboo pin including fevicol as if required complete all as specified and directedas follows :- |
| 30 | Teak wood legs |
| 31 | Teak wood long rail |
| 32 | Teak woodshort rail |
| 33 | Teak wood stiffener (Side/ Centre) |
| 34 | Recanning of repaired stool dressing CB with best quality of approved plastic cane 2 mm wide and 0.4 mm thick of white of 2 mm wide and 0.4 mm thick complete all as specified , directedand shown on drawing. |
| 35 | CHAIR VERANDAH, FD-256, 359 |
| 36 | Continuous running standard welding around 20mm dia conduit pipe on broken joints including painting of distrubed area to match the old finish, complete all as directed. (each joint measured) |
| 37 | Taking out unserviceable stiffener and supply and fixing new rod made of 10 mm dia MS rod with gas welding as per shape and size as shown on drg including a coat of red oxide primer including preparation of new steel surface complete all as specified and directed. |
| 38 | Taking out unserviceable leg and supply and fixing new leg made of20mm dia MS conduit pipe of 1.6mmwall thickness (U Shape) duly weldedwith existing shape & size including a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing anddirected. |
| 39 | Removal of unserviceable cane from Chair Verandah and recanning of painted chair Verandah with approved quality of white cane of 4.0mm wide half round 0.6mm thickincluding replacing of hard PVC shoe in white colour of best quality, complete all as specified,shown on drawing and directed. |
| 40 | COUCH EXAMINATION STEEL, FD-122 |
| 41 | Removing unserviceable worn out and broken plywood from the top and supply & fixing new top of 18mm thick ply wood of size 1800 x 900mm commercial BWR quality complete all as specified and directed. |
| 42 | Removing unserviceable worn out cushion and rexine cloth, supply and fixing new cushion foam 32 desity 100mm thick of size 1800x 900mm, duly upholstered with rexine cloth of approved shade and quality,all as specified and directed. |
| 43 | ALMIRAH LARGE STEEL WITH SHELVES,SIZE 1985MM X 920MM X485MM, FD-1031, 1031, 114 |
| 44 | Taking out old unserviceable lock and supply and fixing new MS body & six lever lock with keys in duplicate of approved best quality complete all specified and directed. |
| 45 | Taking out old unserviceable handle and supply and fixing new handle mild steel chromium plated 150mm long of best quality, as shown on drg, complete all as specified and directed. |
| 46 | Locking device complete including MS plate and rod, chakri etc as per size and shape, fixed in repair, as shown on drg complete all as specified and directed. |
| 47 | Taking out unserviceable leg and supply and fixing new leg made of 1mm thick PBI Sheet with and includinggas welding as per shape and size as shown on drg including two coats of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed. |
| 48 | Clamp with nut and bolts for shelves as in repair, as shown on drg duly painted complete all as specified and directed. |
| 49 | Weldingin repairs to broken places n.exc 50mm and smoothing the welding, cleaning of surface complete all as specified and directed. |
| 50 | ALMIRAH MEDIUM STEEL WITH SHELVES SIZE 1270MM X765MM X440MM, FD-1032 |
| 51 | Taking out old unserviceable lock and supply and fixing new MS body & six lever lock with keys in duplicate of approved best quality complete all specified anddirected |
| 52 | Taking out old unserviceable handle and supply and fixing new handle mild steel chromium plated 150mm long of best quality, as shown on drg complete all as specified and directed. |
| 53 | Locking device complete including MS plate and rod etc as per size and shape fixed in repair, as shown on drg complete all as specified and directed. |
| 54 | Taking out unserviceable leg and supply and fixing new leg made of 1mm thick PBI Sheet with and includinggas welding as per shape and size as shown on drg including two coats of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed. |
| 55 | Weldingin repairs to broken places n.exc 50mm and smoothing the welding, cleaning of surface complete all as specified and directed. |
| 56 | BOOK CASE STEEL, FD- 90 / 1028 |
| 57 | Taking out old unserviceable handle and supply and fixing new SS handle 100mm long (as per Sample)complete, all as specified and directed. |
| 58 | Taking out old unserviceable lock and supply and fixing new MS body & six lever lockfour in one withkeys in duplicate of approved best quality complete all specified anddirected |
| 59 | Taking out old unserviceable/ broken glass and supply and fixing new 4mm thick galss for door shutter complete all as specified , directedand shown on drawing. |
| 60 | Taking out unserviceable door shutter and supply and fixing new door shutter made of 1mm thick PBI Sheet with and includinggas welding as per shape and size as shown on drg including two coats of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed. |
| 61 | REPAIR TO LOCKER STEEL BED SIDE, Drg No. FD-1029 |
| 62 | Material and labour for weldingin repairs to broken places n.exc 50mm and smoothing the welding complete all as specified and directed. |
| 63 | Taking out old unserviceable handle and supply and fixing new handle 100mm X 20mm mild steel chromium plated in best quality complete all as specified and directed. |
| 64 | Taking out unserviceable hasp and staple and supply and fixing new hasp and staple 75mmX40mmX3mm mild steel chromium plated in best quality to be fixed with rivets complete all as specified and directed. |
| 65 | Taking out unserviceable hinge and supply and fixing new hinge (heavy duty) 75mm long to be fixed by welding complete all as specified and directed. |
| 66 | Taking out unserviceable leg and supply and fixing new leg made of 1mm thick PBI Sheet with and includinggas welding as per shape and size as shown on drg including a coat of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed. |
| 67 | Taking out unserviceable conduit pipeand supply and fixing new 20mm dia bore mild steel conduit pipe chromium plated as shown on drg complete all as specified and directed. |
| 68 | Taking out unserviceable sockets and supply and fixing new sockets 20mm dia as shown on drg complete all as specified and directed. |
| 69 | Preparation of old wooden surfaces of wooden furniture articles by removing of existing polish with sand paper, filling bore, holes with putty & finally rubbing with sand paper/abrasive cloth throughly for smooth and clean surface and applying one coat of French polish of approved quality and over it applying a coat of Touchwood glossy polish, complete all as specified and directed for the following furniture articles and unexposed /external surfaces remaining surfaces shall be applied one coat of pink primer. |
| 70 | Chair dining, FD- 228 / 279 / 1105 |
| 71 | Chair writing, FD-250/ 280/1107 |
| 72 | Chair easy, FD- 201/229/1108 |
| 73 | Stool Dressing CB, FD-282/374/27 |
| 74 | REPAIR TO SOFA SET 3 & 1 SEATER MAKE DURIAN (FD-TP) |
| 75 | Removing of existing unserviceable cushion of sofa set 3 seater alongwithleatherite cover (Model No BWS/37916/B/3), supply and fixing new foam cushion of 100mm thickness (40 density) Make shall be of sleep Well/ Curlon/Duro Foam as approved for seat and back of sofa set duly covered with leatherite cover of worth not less than Rs. 350/- per metre and shade of sample as approved by GE complete all as specified and directed. |
| 76 | Removing of existing unserviceable cushion of sofa set 1 seater alongwithleatherite cover (Model No BWS/37916/B/1), supply and fixing new foam cushion of 100mm thickness (40 density) Make shall be of sleep Well/ Curlon/Duro Foam as approved for seat and back of sofa set duly covered with leatherite cover of worth not less than Rs. 350/- per metre and shade of sample as approved by GE complete all as specified and directed. |
| 77 | Preparation of all exposed surface of locker steel (in side & outside)including carrying out repairs such as necessary denting wherever required and applying one coat of synthetic enamel paint (hemotone / Sliver grey in front side and light / TA grey inside as approved) with Spray painting over a coat of red oxide primer and filler (putty) wherever required,complete all as specified , directedand shown on drawing. |
| 78 | Almirah large steel with shelves, FD-1031, 114, 1033 |
| 79 | Almirah medium steel with shelves, FD-1032 |
| 80 | Book Case Steel, FD- 90 / 1028 |
| 81 | Locker steel FD-1029 |
| 82 | Spray painting to following furniture articles with one coat of synthetic enamel paint ofGrey colour/ OG/ White/ Black, first quality colour including putty work and smoothening of surfaces complete all as specified and directed. |
| 83 | Chair Verandah, FD-256, 359 |
| 84 | Couch examination steel, FD-122 (M) |
| 85 | Rack Adjustable 3 tier, FD-106 (M) |
| 86 | Stool steel 305mm x 305mm x 510 / 560 /760mm, FD-81 (M) |
| 87 | Screen movable steel 3 Folds, FD-83 |
| 88 | Stool step 2 Tier, FD-131 |
| 89 | Table bed side steel, FD- 133 |
