|
| 1 | Repair of Bed Ply Wood Top includes following items (refer Drg No. FD-246) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 2 | Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 3 | Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including covered with 12mm thick half cut beading both side of head board of Bed hard including removing of existing unserviceable ply wood from existing head board of Bed hard all as specified and shown on drgor as directed by Engr-in-Charge.. |
| 4 | Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including with 12mm thick half cut covered with beading both side of foot board of Bed hard including removing of existing unserviceable ply wood from existing foot board of Bed hard all as specified and shown on drgor as directed by Engr-in-Charge.. |
| 5 | Supply & Fix new plywood top 12mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drgor as directed by Engr-in-Charge.. |
| 6 | Supply & Fix of new bottom rail made out of 2nd Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable bottom rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 7 | Supply & Fix of newlegs of head board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of head board all as specified & shown on drg or as directed by Engr-in-Charge. |
| 8 | Supply & Fix of newlegs of foot board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of foot board all as specified & shown on drg or as directed by Engr-in-Charge. |
| 9 | Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats andall as specified & shown on drg or as directed by Engr-in-Charge. |
| 10 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of bed ply wood top as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 11 | Repair of Bin soiled lilen includes following items (refer Drg No. FD-212/FD-244) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 12 | Supply & Fix of top made of 6mm thick plywood with teak veneer fixed in position of Bin soiled linen including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge. |
| 13 | Material & Labour for removing of old existing unserviceable ply wood from front side of Bin soiled linen complete and replacing the same with new 6 mm thick ply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge. |
| 14 | Material & Labour for removing of old existing unserviceable ply wood from back side of Bin soiled linen complete and replacing the same with new 6 mm thickply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge. |
| 15 | Removing of existing unserviceable cane both side from Bin soiled linen and reweaving the same with new cane plastic 2mm half round in godrej pattern and providing 4mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 16 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of Bin Soiled Linen as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 17 | Repair of Chair Dining Offrs includes following items (refer Drg No. FD/MAP/II/04) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 18 | Supply & Fix of new rail made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tighteningthe whole frame and removing existing unserviceable rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 19 | Supply & Fix of new front legs made out of1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 20 | Supply & Fix of new rear legs made out of1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable rear legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 21 | Supply & Fix of new stiffener made out of1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge. |
| 22 | Supply & Fix of new back rest made out of1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable back restall as specified & shown on drg or as directed by Engr-in-Charge. |
| 23 | Removing of old existing unserviceable cushion foam with cover existing size and Supply & Fix new cushion foam sheet 75mm thick and having 40 density duly covered with tapestry cloth not less than Rs.350/- per meter febric fitted on 12mm thick commercial plywood BWR grade of existing size all as specified and shown on drg or.as directed by Engr in Charge. Make :- Sleepwell/Kurlon/Godrej/ISI Marked |
| 24 | Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 25 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of chair dining as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 26 | Almirah Medium/Small Steel with Shelves includes following items (refer Drg NoFD-243/1032) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 27 | M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 28 | M&L for removing existing UNSV locks and S&F new locks 6 lever harrison/Godrej make of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 29 | M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 30 | M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 31 | M&L for removing existing UNSV hinges and S&F new hinges of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 32 | M&L for removing existing UNSVbase/legsand S&F new base/legs of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 33 | M&L for removing existing UNSVshelvesand S&F new shelves made of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 34 | M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 35 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah Med steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 36 | Locker Steel includes following items (refer Drg NoFD-257/1029) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 37 | M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 38 | M&L for removing existing UNSV hasp and stapple S&F new CP hasp and stapple of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 39 | M&L for removing existing UNSV hinges and S&F new hinges of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 40 | M&L for removing existing UNSVbase/legsand S&F new base/legs of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 41 | M&L for removing existing UNSVshelvesand S&F new shelves made of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 42 | M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 43 | M&L for removing existing UNSV conduit pipe S&F new conduit pipe of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 44 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Locker steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 45 | Repair of Sofa Set 5 Seater/4 seater includes following items (refer Drg No. FD-281 And FD-373) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 46 | Removing of old existing unserviceable cushion foam with cover 21\" x 22\" x 4\"\" and Supply & Fix new cushion foam sheet 100 mm thick and having 40 density duly covered with tapestry cloth not less than Rs.350/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side all as specified and shown on drg or.as directed by Engr in Charge .Make :- Sleepwell/Kurlon/Godrej/ISI Marked |
| 47 | Supply & Fixof long railmade out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of old unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 48 | Supply & Fix of new legs made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 49 | Supply & Fix of new batten strips made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable batten strips all as specified & shown on drg or as directed by Engr-in-Charge. |
| 50 | Supply & Fix of new arm restmade out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old existing arm rest all as specified & shown on drg or as directed by Engr-in-Charge. |
| 51 | Material & Labour for removing & scrubbing of old polish of sofa set 5 seater by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 52 | Material & Labour for removing & scrubbing of old polish of sofa set 4 seater by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 53 | Repair of Table Dressing Gents includes following items (refer Drg No.FD-230/FD-379) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 54 | Removing of existing unserviceable/ defacted looking mirror of existing size and providing new looking mirror of same size duly framed with hard teak wood and including replacement of ply wood with new commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror all as specified and shown on drg or.as directed by Engr in Charge. |
| 55 | Supply & Fix new top of table dressing gents made of commercial ply wood 12 mm thick conforming to IS: 303 BWR grade including over paste of laminated sunmica 1mm thick and removing of existing unserviceable ply & sunmica all as specified and shown on drg or.as directed by Engr in Charge. |
| 56 | Supply & Fix new drawer made out of plywood commercial 12mm thick over paste of laminated sunmica sheet 1mm thick including providing the lower ply 6mm thick and chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge. |
| 57 | Supply and fix in replacement of chromium plated knobe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 58 | Supply and fix in replacement of MS key plate complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 59 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table dressing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 60 | Repair of Table Bed side (MAP) includes following items (refer Drg. No. FD-E6/MAP/15®) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 61 | Supply & Fix top made of Pre laminated Particle board 18/19 mm thickone side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing UNSV Top all as specified and shown on drg or as directed by Engr-in-Charge. |
| 62 | Supply and fix in replacement of chromium plated handle if existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge.. |
| 63 | Supply & Fix new drawer made of commercial plywood 12mm thick BWR grade and front side pannel shall be made out of Pre-laminated Particle board 18/19 mm thickone side teak face exterior grade & bottomg side shall be applied of existing size of commercial plywood 6mm thick and also removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge. |
| 64 | Supply and fix in replacement of rubber shoe of existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge.. |
| 65 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Table bed side (MAP) as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 66 | Repair of Dressing Mirror gents (MAP) includes following items (Refer Drg No. FD-E6/MAP/16) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 67 | Supply and fix looking mirror of size 1200 x 600 x 5.5 mm thick with existing beading where as required made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing mirror including removal of old mirror all as specified and shown on drg or as directed by Engr in Charge. |
| 68 | Supply & Fix of new 5.5mm thick movable glass shelves including removing of existing unserviceable glass complete all as specified and shown on drg or as directed by Engr-in-Charge. |
| 69 | Supply & Fix new Megnatic catcher including removing of existing unserviceable megnatic catcher complete all as specified and shown on drg or as directed by Engr-in-Charge. |
| 70 | Supply & Fix new plywood back side 12 mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drgor as directed by Engr-in-Charge.. |
| 71 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of dressing mirror gents as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 72 | Repair of Peg Table includes following items (refer Drg No.FD-236/FD-277/FD-384) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 73 | Supply & Fix of new top made of Pre laminated Particle board18/19 mm thickone side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge. |
| 74 | Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 75 | Supply & Fix of new long rail made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 76 | Supply and fix in Replacement of unserviceable shoe with new PVC / hard rubber shoe complete all as specified and shown on drg or.as directed by Engr in Charge. |
| 77 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Peg table as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 78 | Repair of Table Centre includes following items (refer Drg No.FD-274 & FD-235 ): work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 79 | Supply & Fix of new top made of Pre laminated Particle board18/19 mm thickone side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge. |
| 80 | Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 81 | Supply & Fix of new long rail made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 82 | Supply & Fix of new short rail made out of1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable short rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 83 | Supply and fix in Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified and shown on drg or as directed by Engr in Charge. |
| 84 | Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table centre as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 85 | Repair of Chair Easy includes following items (refer Drg. No. FD-229) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 86 | Supply & Fix of new rail with suitable holes made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing existing unserviceable rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 87 | Supply & Fix of new front legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 88 | Supply & Fix of new rear legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing of existing unserviceable rear legsall as specified & shown on drg or as directed by Engr-in-Charge. |
| 89 | Supply & Fix of new Arm rest made out of1st Class hard wood well seasoned free from cracks & dead knots and removing of existing unserviceable Arm rest all as specified & shown on drg or as directed by Engr-in-Charge. |
| 90 | Removing of existing unserviceable cane from chair easy (both Seat & back) and reweaving the same with new cane plastic 2 mm half round of Shah/Premier make godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 91 | Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 92 | Material & Labour for removing & scrubbing of old polish by sand/emery paper, filling all joints gap, prepairing old and new surfaces of chair easy as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 93 | Repair of Chair writing includes following items (refer Drg No. FD-250, FD-280)) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 94 | Supply & Fix of new rail with suitable holes made out of1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame and removing of existing unserviceable rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 95 | Supply & Fix of new front legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 96 | Supply & Fix of new rear legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable rear legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 97 | Supply & Fix of new stiffener made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge. |
| 98 | Supply & Fix of new Arm rest made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable Arm rest all as specified & shown on drg or as directed by Engr-in-Charge. |
| 99 | Supply & Fix of new back rest made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable back rest and all as specified & shown on drg or as directed by Engr-in-Charge. |
| 100 | Removing of existing unserviceable cane from chair writing and reweaving the same with new cane plastic 2mm half round of Shah/Premier make godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 101 | Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 102 | Material & Labour for removing & scrubbing of old polish by sand/emery paper, filling all joints gap, prepairing old and new surfaces of chair writing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 103 | Repair of Chair Dining includes following items (refer Drg No. FD-279 And FD-228)) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 104 | Supply & Fix of new rail with suitable holes made out of1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing existing unserviceable rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 105 | Supply & Fix of new front legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 106 | Supply & Fix of new rear legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable rear legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 107 | Supply & Fix of new stiffener made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge. |
| 108 | Supply & Fix of new back rest made out of1st Class hard wood well seasoned free from cracks & dead knots and removing existing unserviceable back restall as specified & shown on drg or as directed by Engr-in-Charge. |
| 109 | Removing of existing unserviceable cane from chair dining and reweaving the same with new cane plastic 2mm half round of Shah/Premier make godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 110 | Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 111 | Material & Labour for removing & scrubbing of old polish by sand/emery paper, filling all joints gap, prepairing old and new surfaces of chair dining (Cane/PVC seat) as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 112 | Repair of Chair Wooden Bottom includes following items (Refer Drg No. FD 285)) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 113 | Supply & Fix of rail made out of1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of old existing rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 114 | Supply & Fix of front legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing of old Unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 115 | Supply & Fix of rear legs made out of1st Class hard wood well seasoned free from cracks & dead knots and removing of old Unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 116 | Supply & Fix of new stiffener made out of1st Class hard wood well seasoned free from cracks & dead knots and removing old Unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge. |
| 117 | Supply & Fix of new back rest made out of1st Class hard wood well seasoned free from cracks & dead knots and removing old Unserviceable back rest all as specified & shown on drg or as directed by Engr-in-Charge. |
| 118 | Supply & Fix seat ply wood of6 mm thick commercial conforming to IS: 303 BWR grade and removing of existing seat Ply wood all as specified and shown on drg or as directed by Engr-in-Charge.Make: Green ply/century or as specified in makes list |
| 119 | Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 120 | Material & Labour for removing & scrubbing of old polish by sand/emery paper, filling all joints gap, prepairing old and new surfaces of Chair WB w/o arm as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 121 | Repair of Teapoy wooden includes following items (refer Drg No.FD-278 ) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 122 | Supply & Fix of new top made of Pre laminated Particle board18/19 mm thickone side teak face other side white exterior grade incl providing 6mm thick hard wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.. |
| 123 | Supply & Fix of new legs made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge. |
| 124 | Supply & Fix of new long rail made out of1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 125 | Supply & Fix of new short rail made out of1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable short rail all as specified & shown on drg or as directed by Engr-in-Charge. |
| 126 | Material & Labour for removing & scrubbing of old polish by sand/emery paper, filling all joints gap, prepairing old and new surfaces of Teapoy wooden as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge. |
| 127 | Repair of Locker Wooden includes following items (refer Drg No.FD 54(M)) : work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 128 | Supply & fix top made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable top complete all as specified and shown on drg or as directed by Engr in Charge. |
| 129 | Supply & fix side made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable side complete all as specified and shown on drg or as directed by Engr in Charge. |
| 130 | Material and labour for removing of existing unserviceable ply wood from back side of locker wooden and replacing the same with new 6 mm thick commercial ply wood BWR grade fixed in the same position of wooden locker complete all as specified and shown on drawing or as directed by Engr in Charge. |
| 131 | Supply & Fix new door shutter (Single leaf ) made of block board 18/19mm BWR grade fixed in position of locker including removing of existing unserviceable door shutter complete all as specified and shown on drg or as directed by Engr in Charge. |
| 132 | Material and labour for Removing of existing unserviceable legs of locker wooden and replacing the same with new legs in existing position of size 50x30mmat top and 40x40mm at bottom made by 1st class hard wood well seasoned complete all as specified and shown on drg or.as directed by Engr in Charge. |
| 133 | Material and labour for Removing of existing unserviceable stainless steel courtain rod 20mm dia with bracket of locker wooden and replacing the same with new stainless steel courtain rod 20mm dia in existing position complete all as specified and shown on drg or.as directed by Engr in Charge. |
| 134 | Material and labour for Removing of existing unserviceable shelves of wooden locker and replacing the same with new shelves as per existing size and shape complete all as specified and shown on drg or.as directed by Engr in Charge. |
| 135 | Supply & Fix new aluminium alloy handles fixed in the position of size 100mm including removing of existing unserviceable aluminium alloy handle complete all as specified and shown on drg or.as directed by Engr in Charge |
| 136 | Supply & Fix new aluminium alloy hasp and staple 100mm including removing of existing unserviceable hasp and staples complete all as specified and shown on drg or.as directed by Engr in Charge. |
| 137 | Material and labour for preparation of old painted surface of locker wooden and applying two coat of synthetic enamel paint (approved shade/colour) to all external and internal surface of locker wooden complete.all as specified and shown on drg or.as directed by Engr in Charge. |
| 138 | Chair Verandah including following items refer Drg No (FD-19M, 256, FD/MAP-II/06) :work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 139 | Material & Labour for removing paints by cutting/scrubbing from chair verandahand contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge . |
| 140 | Material & Labour for removing existing unserviceable cane from chair verandahandrecane the chair (both seat & back) with 4 mm wide half round cane plastic of shah/premier make all as specified and shown on drawing No FD-19M or as directed by Engr-in-charge . |
| 141 | Material & Labour for removing existing unserviceable nylone newar from chair verandahandrewievingthe chair (both seat & back) with 50mm wide 1st quality of nylone newar all as specified and shown on drawing No FD-256 or as directed by Engr-in-charge . |
| 142 | Material & Labour for removing existing unserviceable Seat & Back from chair verandahandrefix the same with new PVC seat & back as shown in Drg. No. FD/MAP-II/06 complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 143 | M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoesall as specified and shown on drawing or as directed by Engr-in-charge . |
| 144 | Chair CB steel with Arms including following items refer Drg No (FD-75(M) :work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 145 | M&L for removing existing UNSV seatS&F new seatmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge . |
| 146 | M&L for removing existing UNSV BackS&F new Backmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge . |
| 147 | M&L for removing existing UNSV Arm rest and S&F new Arm rest made of second class hardwood well seasoned as per exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge . |
| 148 | M&L for removing existing UNSV PVC CapsS&F new PVC Capsof exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge . |
| 149 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel with Arms by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 150 | Chair CB steel without Arms including following items refer Drg No (FD-75(M) :work will be carried out at various places in station, if required or as directed by Engineer in charge- |
| 151 | M&L for removing existing UNSV seatS&F new seatmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge . |
| 152 | M&L for removing existing UNSV BackS&F new Backmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge. |
| 153 | M&L for removing existing UNSV PVC CapsS&F new PVC Capsof exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge . |
| 154 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel w/o Arms outer & inner portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
