|
| 1 | Round the clock Operation along with allied checking, testing thoroughly (24 hours a day, 7 days a week) of all type / size 3 phase submersible pump, terminal box, starter, cable line, electrical connection, automatic distribution panel, 3 phase Boosting Centrifugal pump and allied electrical jobs incl. minor repairing, cleaning of panel, terminal box & all other allied instruments as per direction of Engg. In charge (Manpower should have valid Electrical License on a mandatory basis & should also be thoroughly knowledgeable and experienced in running similar type of system). |
| 2 | Miscellaneous non schedule electrical repairing work and procurement of allied materials to be executed as per necessity on emergency basis in connection with Panel , starter , relay , contractor, single phasing preventer , electrode , water level controller , volt meter , ampere meter , signal lamp , 1.0 sq mm single core flexible wire HRC , fuse & link etc. as & when required.(Agency has to submit Valid Tax invoice for materials and 10% profit will be paid to the agency on it).NB: Material should be checked & verified by electrical department before fixing. |
| 3 | Procurement of Emergency Material related to Pipe line(Suction side) i.e. GI Pipe, elbow, socket, Gasket, Valve, coulpling and any work which is not mentioned in schedule but are required to be done by the agency.(Tata/Jindal)(Agency has to submit Valid Tax invoice for materials and 10% profit will be paid to the agency on it).NB: Material should be checked & verified by electrical department before fixing. |
| 4 | Servicing of Motor- Opening, checking of , Over hauling, replacement of bearing/bush, (SKF), heat varnishing, motor housing,motor base nut bolt checking etc and assembly in proper alignment of following :- |
| 5 | (a)1.5 HP open well submersible motor. |
| 6 | (b)10 HP open well submersible motor. |
| 7 | (c)5.5HP boosting /vertical motor. |
| 8 | (d)10 to 15 HP boosting motor. |
| 9 | (e)20 HP boostingmotor. |
| 10 | (g)10 HP boosting Pump motor |
| 11 | Servicing of Motor & Pump (like Motor winding ,housing, shaft re- metalizing, grinding) with Servicing of Pump(like bearing replace, shaft replace, Impler,Grinding, bush replace,gland packing, machining side complete with painting and refixing) etc of the following :- |
| 12 | (a)1.5 HP open well submersible pump with motor. |
| 13 | (b) 10 HP open well submersible pump with motor. |
| 14 | (c)3.5 to 5.5 HP boosting pump with motor. |
| 15 | (d) 7.5 HP boosting Pump with motor |
| 16 | (e)10 to 20 HP boosting pump with motor. |
| 17 | (f) 5 HP boosting Pump with motor |
| 18 | (g)10 HP boosting Pump with motor (SP) |
| 19 | (h)5.5 HP vertical Pump motor (PH) |
| 20 | Lifting / installing of bore well pump motor set. |
| 21 | Servicing of Pump(like bearing replace, shaft replace, Impler, Grinding, bush replace etc side complete with painting of the following :-Job also includes Motor and pump both are assembly, testing & running with o.k. condition. |
| 22 | (a)1.5 HP open well submersible pump. |
| 23 | (b)5.5 to 10 HP open well submersible pump. |
| 24 | (c)3.5 to 7.5 HP boosting pump. |
| 25 | (d)10 to 20 HP boosting pump. |
| 26 | (e)5 HP boosting Pump |
| 27 | (f)10 HP boosting Pump(swimming Pool) |
| 28 | (g)5.5 HP vertical Pump (PH) |
| 29 | Supply & Installation (New) of the following (complete with testing and run the system),(detail spefication is as per existing running system, Existing boosting system has Motor-Crompton,Pump-Kirloskar and for submersible complete set - KSB/Texmo/Crompton). |
| 30 | (a)1.5 HP submersible Pump with Motor |
| 31 | (b)10 HP submersible Pump with Motor |
| 32 | (c)10 HP Boosting Motor |
| 33 | (d)10 HP Boosting Pump |
| 34 | (e)15 HP Boosting Motor |
| 35 | (f)15 HP Boosting Pump |
| 36 | (g)20 HP Boosting Motor |
| 37 | (h)20 HP Boosting Pump |
| 38 | (i) 5.5 HP Vertical Pump Motor |
| 39 | (j)5 HP Boosting Motor |
| 40 | (k)5 HP Boosting Pump |
| 41 | Motor and Pump New base frame with grouting and complete assembly work and run the above set. |
| 42 | Supply & Installation of {Ameter ,Analog type (0 to 60 A), CT = 3 nos, & Selecter switch= 1 no} set = 1 set |
| 43 | Earthing as per PWD schedule with Earth Pit. |
| 44 | Supply & Fixing Water level controller. |
| 45 | Supply & fixing water level sensor. |
| 46 | Supply & Fixing of 3 x 1.5 sq mm Copper wire (wall & underground) with (PVC pipe) &allied accessories. (Polycab/Ancor/Finolex). |
| 47 | Supply & Fixing of 8 Module MS box with cover 16 A switch - 1 nos , 16 A socket -1 no 10 A switch-2 nos, 10 A socket - 1 nos. with allied material (Anchor Roma). |
| 48 | Supply & Fixing of 20 MM PVC pipe with allied accessories. |
| 49 | Supply and laying 25 x 3 earth strip. |
| 50 | Supply & laying of 3 c x 2.5 sq mm Flat cable for borewell. (Polycab/Ancor/Finolex). |
| 51 | Supply & fixing of 6 mm SS wire rope with clamp for bore well protection. |