|
| 1 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 2 | With cement mortar 1:4 (1 cement: 4 coarse sand) |
| 3 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 4 | Two coat |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 6 | Two or more coats on new work over an under coat of suitableshade withordinary paint of approved brand and manufacture. |
| 7 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 9 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 10 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 11 | In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 12 | Providing and fixing Pre- laminated with decorative lamination on both side exterior Grade I MDF Board 18 mm thick confirming to IS : 14587 marked to frame, backing or studding with screws etc. complete ( Frames,backing or studding to be paid separately ): |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 14 | Local best quality Teak wood |
| 15 | 25 mm thick plank walling (Tolhao local best quality) and Tolhao wood beading 62mm x 12mm i/c fitting and fixing with necessary screws and nails complete (frame work to be paid separately). |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. |
| 17 | Local best quality Teak wood |
| 18 | Renewing glass panes, with putty and nails wherever necessary: |
| 19 | Float glass panes of thickness 4 mm |
