|
| 1 | Cutting of wild grass, rank vegetation, brush wood, etc. with the help of grass cutting machines. near ground level includingCutting of wild creepers from chain link fencing of height up to 2.5m & from 1.0m. area on both sides of fence and disposal of the removal /cuts parts of creepers to designated places by loading and unloadingand subsequent transportation of collected grass at designated places by using tempoetc. complete. The entire work shall be done as per specifications and directions of Engineer-In-Charge. Note: The transportation charge will be paid under respective item. |
| 2 | Hire charges for four wheeler tempo along with driver, having capacity to carry load up to 1.0 MT for disposal of debris, waste etc. generated from road cleanig, open area maintenance, trimming of branches etc. at designated place etc. complete as pe specifications and directions of the Engineer-In-charge. |
| 3 | Supplying of Hydraulic excavator with fuel and driver for excavationin all types of soil, dressing the sides of foundation. Ramming of bottom etc. complete satisfying the requirements including mechanical transportation of materialfrom the location of storage/stacking / quarry, unloading, levelling, spreading, etc. complete as directed by the Engineer-in-Charge |
| 4 | Providing and supplying Mild Steel Office Cabin / Porta Cabin having internal size 12\".0\" X 8\".0\" X 8\".6\" (LxBxH) with following details: 01) Wall thickness of 60 mm.02) Door 01 nos. of size 6.6\" x 4\" - Flush door 32mm thick, water proof with door fittings. 03) Windows 02 nos. of size 3\" x 3\" with 8mm MS square bar in GRILLS - Powder Coated aluminum sliding windows with 4mm thick tinted glass.04) Wall built with L section 50mm x 5 mm and attached with corrugated mild sheet of 20 gauge, Inside finish with 30 mm thick Rockwool/ Glass wool and 18 mm thick pre-laminated particle board.05) Outside finish with red oxide and oil paint.06) Roof built with 16 gauge square tube of 50 mm x 50 mm, attached with corrugated mild sheet of 20 gauge, Inside finish with 30 mm thickRockwool/Glass wool and 18 mm thick particle board.07) Flooring Built with C section (100/50/5) and Square Tube 100x50 and Square Tube 50x50 attaches with 18mm CEMENTBOARD and1.3mm thick PVC mat from top.08) Electric Provision for Computer, Lights, Supply of 02 nos.LED Tubelight, 01 nos. Fan. - Electric points of 12 module with internal wirings to be provided for 01 Computer, 02 nos. LED Tubelight, 01 nos. Ceiling Fan etc. as required. 09) & Including transportation charges. |
| 5 | Providing and fixing in position overhead storage Unitof size 1200 mm x 820 mm x400 mm along with 3 vertical partition & 6 horizontal partition and shutter fior each partition with sides, top, bottom shelves made out 19 mm marine plywood & 6 mm thick teakwood leaping/PVC Edge bending (As per requirement of EIC)with edge molding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with polish.Hand wares such as heavy duty hinges, brass body locks with extra large group key of approved quality, magnetic ball catchers, handles, tower bolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surfacesfinished with 0.8 mm thick laminate the exposed surfaces shall be finished with 1.00 mm thick Laminate of approved shade & colour. etc. complete as er drawings ,specifications and directions of engineer in charge.Note- i) Structure of plywood to be finished with 0.8 mm laminated in inner surface and 1.5 mm thick on outer (External) surface. ii) All exposed edges to be provided with PVC edge bending of1.0 mm with edge bending machine or other equivalent method |
| 6 | Providing and supplying on site medium back 360degrees revolvingtype and tilting chairswith ergonomically contoured backrest ,upholstered withfoamlaminatedmeshfabric of approved colour , five legged high quality nylon base and PU twin wheelcasters having synchro mechanism with 4 position locking , seat slide mechanism with 3 D armrest . The Chairs shall be of High Resilience (H.R.) foam for optimum seating comfort with approved fabric colour etc. complete as per drawings, specifications and directions of engineer in charge. |
| 7 | Mid back |
| 8 | Providing and supplying & fixing of 1 ton air conditioner,with Feature like energy rating 5 star, super silent operation, sleep mode, 5 stage adjustable mode, superdry, 4-way swing, filter clean indicator, high ambient cooling, Anti-microbial filter, ice wash technology, 100% copper. |
| 9 | Providing and fixing in position water purifier with- RO +UV + UF + TDS Controller technology, with high capacity, commercial installation: under the counter/wall mounting etc.complete withfollowing specifications andasdirected by engineer in charge.1) Reverse osmosistechnology.2) Storage capacity of 18 litres.3) Standard prefilter must be provided with the equipments.4) Purification capacity in an hour- 24 litres.5) Equipment shall have a standard warranty of minimum 2 years.6) Feed water limitinq conditionsi) pH of feed - 6.0ii) Electrical Conductivity - 299 prnhos/cmiii) Feed rvater\"fotal Dissolved Solids - 179 mg/ litreiv) Turbidity - 2.7 NTUv) Total hardness - 46.8 (mg CaC03)/ litrevi) Iron content - 0.01 mg/litrevii) Free chlorides - 22 PPm. |
