Supply of 04 port Gigabit WAN SFP interface loaded with 4 Nos 20 KM SFP module. This material must be mutually compatible to Sl. No. 1 & Sl.No.3 and from the same OEM make. Warranty period is 36 months from date of installation. [ Warranty Period: 36 Months after the date of delivery ] ]
3
Supply of 40 KM 1G dual fiber single mode SFP module of standard or reputed make Warranty Period: 36 months. This material must be mutually compatible to Sl.No. 1 and Sl.No.3 [ Warranty Period: 36 Months after the date of delivery ] ]
4
Supply and installation of Router with 4x100/1000M Base-T Ethernet WAN ports. 4 Nos WAN ports supporting G.703 interface/E 1 ports natively, 2Nos of 1G Base-T Ethernet LAN ports, with 200-240V AC power supply nominal at frequency 50+/- 2 Hz of standard or reputed make as per CRIS tech specs vide CRIS Ltr. No.CRIS/HQ/MTWG/26/2023-CN dt. 20/10/23 Annex-A enclosed. (3 years warranty will start from the date of installation) inspection by RITES. List of locations are attached in Annexure -B and Scope of work attached in Annexure - C. The SFPs which is mentioned below as Sl. No. 2 and 3 should compatible to this router. One complete set must be supplied with prior approval before the bulk supply commences. Each set must be packed separately. Any material supplied without prior approval will be subject to rejection. The material should be delivered to the SSE/T/TRM/SBC stores to the JE/SSE/T/PRS office for configuration and finally to transport and install 44 locations, which is mentioned in Annexure - B. Bidders must thoroughly review the scope of work and special conditions as per Annexure - C&D before participating in the Tender. [ Warranty Period: 36 Months after the date of delivery ] ]
5
Supply and installation of Router with minimum 2 Nos of 1G Base-T Ethernet LAN ports, 4 WANports which shall be combination of both10/1000 Base T Ethernet Routed ports and G.703 interface/E-1 portswith 200-240V AC power supply nominal at frequency 50+/- 2 Hz of standard or reputed make as per CRIS tech specs vide CRIS Ltr. No.CRIS/HQ/MTWG/26/2023-CN dt. 20/10/23. (3 years warranty included). Inspection by RITES. The material should be supplies as per CRIS specifications attached as Annexure A. ,List of locations are attached in Annexure -B for installation and Scope of work attached in Annexure -C. One complete set must be supplied with prior approval before the bulk supply commences. Each set must be packed separately. Any material supplied without prior approval will be subject to rejection. The material should be delivered to the SSE/T/TRM/SBC stores to the JE/SSE/T/PRS office for configuration and finally to transport and install 58locations, which is mentioned as Annexure - B. Bidders must thoroughly review the scope of work and special conditions as per Annexure - C&D before participating in the Tender. [ Warranty Period: 36 Months after the date of delivery ] ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
