|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the in surface/ recessed steel/ PVC conduit/Casing Capping as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | 3 x 2.5 sq. mm |
| 4 | 3 x 4 sq. mm |
| 5 | 6 x 4 Sq. mm |
| 6 | 2 X 10 sq. mm + 1 X 6 sq. mm |
| 7 | Replacement of followingelectrical, mechanical component and accessories etc.complete as required |
| 8 | LED lamp up to 9 W,250V |
| 9 | LED Tube light fitting 20/22 W 4 feet long |
| 10 | LED Tube light fitting 10/12 W 4 feet long |
| 11 | PVC insulated copper conductor, single core 1.5 sqmm multistrend wire/cable |
| 12 | PVC insulated copper conductor, single core multistrend 2.5 sq mm wire/cable |
| 13 | PVC insulated copper cable , 3 core 1.5 Sq mmmultistrend wire/cable |
| 14 | PVC insulated copper cable , 3 core 2.5 Sq mmmultistrend wire/cable |
| 15 | PVC insulated copper cable , 3 core 4 Sq mmmultistrend wire/cable |
| 16 | PVC insulated copper 4 core 2.5 Sq mm |
| 17 | PVC insulated copper 4 core 4 Sq mm |
| 18 | SP 5/6 Amps.one way switch piano type ISI Marked |
| 19 | SP 15/16 Amps.one way switch piano type ISI Marked |
| 20 | 6 Pin 15/16 & 5/6 A socket outlet piano type ISI Marked |
| 21 | SP 5/6 Amps.one way modular switchISI Marked |
| 22 | SP 15/16 Amps.one way modular switchISI Marked |
| 23 | 5 Pin 5/6 A modular socket outletISI Marked |
| 24 | 6 Pin 15/16 & 5/6 A modular socket outletISI Marked |
| 25 | Bell push (Piano type) |
| 26 | Bell Switch modular type |
| 27 | PVC modular Box 3 module |
| 28 | PVC modular Box 6 module |
| 29 | PVC modular Box 8 module |
| 30 | Modular base & cover plate 3 module |
| 31 | Modular base & cover plate 6 module |
| 32 | Modular base & cover plate 8 module |
| 33 | Call bell electronic suitable for D.C./A.C. single phase, 230 volts |
| 34 | Driver for 45 W LED street light for Wipro/Philips/Crompton or as per site and Fitting steet light makerequired make |
| 35 | Driver for 70 W LED street light for Wipro/Philips/Crompton or as per site and Fitting steet light makerequired make |
| 36 | Driver for 36 W LED street light for Wipro/Philips/Crompton or as per site and Fitting steet light makerequired make |
| 37 | Modular Blanking Plate s per site and Fittingmakerequired make |
| 38 | Two module stepped type electronices Fan regulator or as per site and Fittingmakerequired make |
| 39 | Wire less Call bell with Remote |
| 40 | RJ-45 ,CAT -6 Computer outlet (modular)or as per site and Fittingmakerequired make |
| 41 | Telephone Socket 1 M (modular)or as per site and Fittingmakerequired make |
| 42 | 2.5 MFD Fan capacitor |
| 43 | PVC Battern /Angle holder |
| 44 | Supplying & laying at site XLPE Insulated PVC Sheathed steel Armoured under ground Electric cable with aluminium conductor for working voltage upto and including 1100 Volts to IS:7098 (Part-1) or IS:1554 (Part-I) with latest amendment as applicable of following Size (make :Finolex /CCI/Polycab/ RR kable/Havells/KCI) |
| 45 | 2 x 6 sqmm |
| 46 | 2 X 10 sqmm |
| 47 | 3 1/2 x 25 sqmm |
| 48 | 3 1/2 x 50 sqmm |
| 49 | Supplying and fixing 5 amps to 32 amps rating, 240 volts \"C\" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 50 | Single Pole |
| 51 | Single Pole and Neutral |
| 52 | Triple pole and Neutral |
| 53 | Triple pole and Neutral 40A to 63 A rating 240/415 V 10 KACCurve MCB suitable for Inductive load |
| 54 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make - BEC/Kissan/Kasta/ Supreme/ Sudhakar/ Reliance) |
| 55 | 20mm |
| 56 | 25mm |
| 57 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including,connections but excluding modular plate etc. as required. |
| 58 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 59 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 60 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps \"c\" series, SP, MCB, in sheet steel enclosure, on surface or in recess with chanined metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 61 | Supplying and Drawing of UTP 4 pair CAT 6 Cable in the executing surfacerecssed /Steel/PVC conduit,as required |
| 62 | 1 run of Cable |
| 63 | 2 run of Cable |
| 64 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 65 | Supplying Installation testing and commissioning of min200 mm , 1350rpm PVC exhaust fan including louver/ shuter as front cover in the existing opening, including making good the damage, connection with 3 x 1.5 Sq. mm copper conductor i/c testing, commissioning etc. as required. (Make:Crompton/Orient/Havells/usha) |
| 66 | Supplying Installation testing and commissioning of 300mm , Wallfan , including making good the damage, connection with 3 x 1.5 Sq. mm copper conductor i/c testing, commissioning etc. as required.(Make:Crompton/Orient/Bajaj ) |
| 67 | Rewinding and overhauling of following mono block pump motor including replacement of bearings water seal rusted nut & bolt, repairing of shaft & impeller etc. after disconnecting and reinstallation of the same complete in all respect. |
| 68 | 10 HP |
| 69 | Rewinding and overhauling of following exhaust fan replacement of bushes bearing shaft including capacitor etc. complete as required |
| 70 | 9\" Exhaust fan |
| 71 | 12\" Exhaust fan |
| 72 | 18\" Exhaust fan |
| 73 | Rewinding and overhauling of following ceiling fan includingBushes, Bearing, bearing, shaft and capecitor, etc. complete as required. |
| 74 | 48\" Ceiling fan |
| 75 | 56\" Ceiling fan |
| 76 | Recess /surface mounted Led fitting circular shape 12-15 W,Efficacy not less than 10lm/watt having high grade polycarvonate /CRCA housing with foffiusedn optic ,CCT 5700-6500 K,CRI>70 PF>0.9 ,30000 buring hours life time ,complete ertc as required with 3 year replacment warrenty |
| 77 | Recess /Surface mounted 9-12 watt ,800 lumens ,flexible head to direct light when needed dual defuser,n long lasing LED source ,made of synthetis and aluminium LEDfixture etc as required |
| 78 | Street light LED fitting 50-60 watt ,Efficacy not less than 100 lm/watt, having diecast alluminium CCT 5700-6500K,CRI >70 ,PF 0.9 ,50000 burinign hours lift time complete as required with 3 year warrenty |
| 79 | Floodlight LED fitting 50-70 watt ,Efficacy not less than 100 lm/watt, having diecast alluminium CCT 5700-6500K,CRI >70 ,PF 0.9 ,50000 burinign hours lift time complete as required with 3 year warrenty |
| 80 | Supplying of 1 Skilled, 1 semi skilled and 1 unskilled with experiances manpowerin general shiftfor the operation of 3Nos.175 Ton Air conditioning system with AHU and other related equipmentsstarting from 8 AM to 6 PM working/holidays having thorugh outknowledge of operation of water chilled air condtioning and AHU units and Co- ordainate with AMC service Provider for resolution of all Breakdown calls. with maintances of operation & service register on daily basis and other work given by engineer in charge |
| 81 | Dehydration and filtration of existing transformer oil through oil filter machine with two or more circulation to achive the required dieletric strength of oil in the existing installed place oftransformer including testingthe oil before and after filteration inBDV testing kit at site i/c replacing , existingdamaged gasket to avoid oilleakage etc. as required. |
| 82 | Supplying & topping of new transformer oil confirming to IS 335 / 1983 EHV grade - 2 in the existing power transformer in AMPRICampus etc. as required. |
| 83 | Supply & replacement of new silica gel in the new breather of transformer etc as reqd. |
| 84 | Servicing of outdoor 33 Kv VCB with working of backup supply with repalcement of battery of UPS installed in VCB panel etc as required in VCB |
| 85 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. |
| 86 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 87 | 12 way double Door |
| 88 | Supply and installation of Mid way light having minimum 40 watt Envoimental friendly, energy saving long life corresion resistance mounting in tracess/recesses/ surface with provision of hanging of Tracess and surface for proper light having IP65 LED light. |
