|
| 1 | WORK NAME |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness |
| 5 | Carpenter (average) |
| 6 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure \"A\" : 30 mm thick, Decorative teak veneer both side |
| 7 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 8 | Providing and fixing False Ceiling Tiles of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main \"T\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross \"T\" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \"T\" at 600mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200m center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. (The rate is excluding cost of tiles which will be paid separately ). |
| 9 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window. |
| 10 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick. Ply wood IS : 710- 1976 marked, 12 mm thick Teak ply BWR one side |
| 11 | Providing and fixing aluminium composite panel 5 mm thick by using 0.5 mm thick aluminium foil and 5 mm thick reflactive glass (sand bobbin ASHI India or equivalent) and framing of 2 mm thick aluminium section of 50 x 50 mm size silicon & glazing tap etc. complete up to IIIrd floor, pattern as approved by engineer in charge. PWD BSR 2013 |
| 12 | Providing and supply of Glass Door Almirah in Rajeev Gandhi Prashasnik Bhawan of Municipal Corporation Kota, Glass Door Almirah as per following technical specification :- (1) Over Side :- (3-0\"X1-6\"X6-6) including leg height of 5\" inches. (2) Material : CRCA Steel 0.9 + 0.1 mm thick sheet as per IS-5131994, Steel sheet shall be oven baked epoxy polysestor powder coated with 40-50 dry film thickness. (3) Configuration :- 5 Sheleves with floor glass door desgined and proper sealing against dust and insects. (4) Constuction:- It should have three way bolting mechanism. Two door should have hinge mounted on frame. (5) Glass Door : Thickness 3m + 0.1 with six level lock and chrome plated \"cg handle on door. (6) Colour :- Olive green or Prince Grey. Non SOR Item |
| 13 | Providing visitors chairs medium back premium leatherite chair hight adjustment gas lift 5 prong chrome plated steel base fitted with lock type twin wheel castors for easy movement. Steel arm rest with leatherite covering. Single seat and back cushioned with high density foam and upholstered in leatherite torsion bar mechanism of approved design complete as per Architect design and drawing approved by Engineer-in-charge. For Visitors (Non SOR Item) |
| 14 | Providing officer chairs medium back premium leatherite chair hight adjustment gas lift 5 prong chrome plated steel base fitted with lock type twin wheel castors for easy movement. Steel arm rest with leatherite covering. Single seat and back cushioned with high density foam and upholstered in leatherite torsion bar mechanism of approved design complete as per Architect design and drawing approved by Engineer-in-charge. For Officer Chair (Non SOR Item) |
| 15 | Providing and supply of Neoprime/ EPDM Rubber Gasket Non SOR Item Please Enable Macros to View BoQ information |
