|
| 1 | Providing and Fixing of cup board with mica laminated 18mm HDMR board out side with one side decorative lamination .depth of cupord is 30 cm back side of cup board made by 12mm thick HDMR board including cost of all accessories such as handle, hinges, lock etc complete work. |
| 2 | Treatment of Soil \"under Existing Floors Using chemical emulsion @ One Litres Per hole, 300 mm apart including drilling 12 mm holes and plugging with cement mortar 1 : 2 (1 cement 2 Coarse sand ) to match the exiting floor: with chlorpyriphos/Lindane E.C. 20% with 1% Concentration. (DSR-2.35.3.1, |
| 3 | Dismantling Doors, windows and clerestory window (Steel or Wood) shutter including chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. DSR.No-15.12.1, |
| 4 | Providing wood work in frame of doors, window, clerestory window and other frames, wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately. (Sal wood, DSR-9.1.2, |
| 5 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats each DSR-14.2.1, |
| 6 | Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) Non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DSR N0-9.21.1, |
| 7 | Providing and fixing of kitchen shelves/cabinet with basket, shutter is made by mica laminated 18mm HDHMR board and back side of box is made by 12mmHDHMR board. Length and width of cabinet is 50cm and depth and height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, rolling channel, basket, catcher etc complete work. |
| 8 | Providing and Fixing of cup board with mica laminated 18mm HDMR board out side with one side decorative lamination .depth of cupord is 30 cm back side of cup board made by 12mm thick HDMR board including cost of all accessories such as handle, hinges, lock etc complete work with labor as per direction by E/I. |
| 9 | Providing and fixing white vitreous china single Piece water closet Cera make CONA with manually controlled device conforming to IS 7231, with all fittings and fixtures complete lncluding cuting and making good the walls and floors wherever required (W.C. Pan with ISI marked white solid plastic seat and lid) (Cona 685x360x720mm Cat No-S1013164) |
| 10 | Supply and fixing of white Glazed earthan ware Wash hand Basins With Pedestal Cera make with C.P. jali, C.P. Angle valve, PVC waste pipe, C.P. Basin Mixer, pvc connection pipe 15mm dia 400mm long including supply of all materials, Labours,T & P etc. required for proper completion of the work. (WHB model Cornet Size-630x450 mm Cat No-S2040104) |
| 11 | Supply and Fixing of C.P. Brass Wall Mixter with Tele phonic shower 3 in 1 (L&K make Code-0457) or Equivalent quality. |
| 12 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18, Please Enable Macros to View BoQ information |
