|
| 1 | Excavation in trenches not exceeding 1.5M in depth and not exceeding 1.5M wide for pipe and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exceeding 1.5m in depth and not exceeding 1.5m wide for cable/pipe and getting out in hard rock/Road/PCC hard standing and making thedisturbed surfaces good same as existing before excavationcomplete all as specified and directed. |
| 3 | Removing excavated materials(soil) not exceeding 50M, depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 4 | S&F all in one solar light fittings 120 watts , Aerodynamic design having not less than 140/150Lumen/watt monocrystalline paneltype compact & fully integrated designed rust proof Al housing, LED DC driver, PIR Type sensor, 6000K, IP 66,lifepo4 battery,MPPT charge controller complete with all fixing and mounting arrangements to pole or as specified & directed. Note;-The quoted rate is inclusive of labour and Hydraulic movable telescoping boom lift /genie boom lifts/scissor lifts if required for shifting and installation of light fittings |
| 5 | Supply and fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-64 (12.0 metres long)complete with all fixing and mounting arrangements to pole along the footpath to Hill Top area or as specified & directed Note;-The quoted rate is inclusive of labour andHydraulic movable telescoping boom lift /genie boom lifts/scissor lifts if required for shifting and instllation of poles |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed. |
| 7 | Supply only Plain mild steel wire,galvanised class 3, of size/dia of wire 4mm mesh size 50 x 50 mm in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts,including securing with and provisionof galvanised iron tying wire, galvanised iron staples or steelpins, etc. as directed |
| 8 | M&L for MS flat not less than 40*6 mm Bands, straps, supports or stays for Chain link fencing including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts,plain angle cleatsfor securing purlins rafters, knee pieceinserts, two way and three way straps, plate washersspecially provided, incl dismantling for all as specified and directed. |
| 9 | M&L for painting surfaces of any description, over 10cm in width or girth,with one coat of red oxide/zinc chrome and two coats of synthetic enamel paint specially provided for all as specified and directed. |
| 10 | M&L forMild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia all as specified and directed. |
| 11 | M&L Mild Steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders,chequred platesframed balusters, walk ways, railings, gates, frame work oftank, valvepit and similar workincl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed. |
| 12 | Material & labour for PCC (1:2:4), type B1 (using 20 mm graded stone aggregate) asinpillarto support the pipe lines including necessary form work and finishing the exposed surfaces of concretefair and even all as specified and directed |
