|
| 1 | M&L for false ceiling with \"E\" board \"Classic\", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on anodised aluminium snap grid to support the boards/ files with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/ sides including hanging arrangements complete all as specified and as directed |
| 2 | Solid PVC Wall Lining consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 3 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 4 | M&L for Providing precast cement concrete louvres and jallies, set in cm 1:4type B-0 1:2:4 (12.5mm aggregate) 25mm thick (measured solid), in cluding all mouldings but excluding frame complete all as specified and directed. |
| 5 | Cutting openings, through brick walls build in cement mortar for door, window and other openings or enlarging existing openings, cutting for fixing holdfast for new shutter/door, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m all as specified and directed. |
| 6 | M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in fixing holdfast , cills, steps; seismic and other similar bands, plinth courses, string courses, copings etc. complete all as specified and directed. |
| 7 | M & L for Brick work with sub class \"B\" bricks using old size bricks, exe 6 mtr mean radious, built in CM 1:6 complete all as specified and directedby Engr-in-Charge. |
| 8 | M&L Rendering 10 mm thickface of PCC/brick masonary or concrete surfacein CM 1:6 finished even and smooth (without using extra cement)complete all as specified and as directed. |
| 9 | M&L for preparation of newly plastered surfacesofwallsand applying two coats of OBD over a coat of primer complete in patch work all as specified and directed by Engr-in-charge. |
| 10 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade/Pattern i.e in camouflage pattern. : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 11 | S&F for mild steel in Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 12 | M&L for preparation of steel Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed |
| 13 | S&F for mild steel in hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 compete all as specified |
| 14 | S&F for Collapsible steel gates, consisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc., as specified, erected in position and securing runners with holdfasts and brackets, with MS Hot rolled medium channel of size 18x9x3mm , and flats for crossings of size 18x5 mm ,Tee and flats for top and bottom runners with a minimum web of 40x12mm and flange of 40x6mm and the distance from centre to centre of channel pickets is 10 cm complete all as specified. |
| 15 | M & L for two coats of synthetic enamel painting over a coat of red oxide primer to iron & steel surfaces exe 10 cm width & girth incl preparation of surface complete all as specified and directed by Engr-in-Charge. |
| 16 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for |
| 17 | Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits, maholes,etc not exc10 sq m on plan and not exc in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 18 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed. |
| 19 | M&L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, Cement concrete in foundations, filling and mass concrete surface finished fair and even, complete all as specified & directed. |
| 20 | M&L for 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces of walls, finished the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 21 | M & L for rendering 15mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:4finished surfacesfair & even using WPC (Water Proofing Compound) as per manufacturers instructions complete all as specified and directed.Note : WPC measured and paid separately. |
| 22 | Supply only integral water poofing compound (PIDIPROOF LW) |
| 23 | M&L for Damp proof course in Cement concrete (1:2:4) Type B0 20mm aggregate 40mm thick to horizontal or vertical surfaces including necessary formwork all as specified and directed. |
| 24 | M&L for approved good earth filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering all as directed by Engineer in Charge. |
| 25 | M&L for 100mm thick PCC (1:2:4) typeB-2 using 40mm graded stone aggregate insub base etc finishing cement concrete surface even and fair without using extra cementcomplete all as specified and as directed by Engineer-in-Charge. |
| 26 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the tarting point complete all as specified and directed. |
| 27 | M&L for RCCtype B1(1:2:4) grade using 20mm graded stone aggregate as in chajjas complete all as specified and directed. |
| 28 | M&L for formwork fair finished surfaces to chajjas,troughs and similar items including edges all as specified & directed by Engineer in Charge. |
| 29 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified anddirected. |
| 30 | M & Lfor Glazed ceramic tiles in vertical surface 350x 250x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick cement mortar 1:4 rendering all as directed. |
| 31 | S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 32 | S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (3 Nos.) suitable handle (1 no.) complete all as specified & directed. |
| 33 | S&F 4.0mm thick sheet glass, ordianry quality coloured/ tinted/ silver finish and glazing with oil putty including rubber beading cleats etc. in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 34 | M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stoneaggreagate in plinth protection, sub base etc finishing cement concrete surface even and fair without using extra cement complete all as specified and directed. |
| 35 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, hollow channel or flat sections) including distance pieces, cleats etc.of I.S.4923-1997 grade St. Fe 410 E-240 complete all as specified & directed by Engr-in-Charge |
| 36 | Preparation of new steel surfaces and applying two coats of epoxy anti corrossive paint over a coat of zinc primer |
| 37 | S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet \"colour\" having tensile strengthof 550Mpaas in roof covering /cladding to wall, fixed with self tapping screws and bituminous washers as in roof complete all as specified and as directed by Engr-in-Charge. |
| 38 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer all as specified & as directed. |
| 39 | M&L for preparation of new plastered surface of walls/ roof/ floor and two coats of weather proof Acrylic emulsion paint (exterior grade) in camouflage pattern on wall, roof or floor incl necessary scafolding over one coat of weather primer complete all as specified and as directed by Engr- in- charge. |
| 40 | S & F 110 mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge |
| 41 | S & F 75 mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge |
| 42 | S & F PVC (SWR) bend 110mm bore any radius all as specified and directed. |
| 43 | S & F PVC (SWR) bend 75mm bore any radius complete all as specified and directed. . |
| 44 | S&F 110mm bore PVC (SWR) junction single Tee equal or unequal complete all as specified and directed |
| 45 | S&F solid PVC door frame of size50mm x 47mm made out of 5 mm wood grain printedPVC sheetreinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 46 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified & directed. |
| 47 | S&F Mild Steel Butt hinges, medium weight, cold rolled, of size 100 mm complete all as specified anddirected. |
| 48 | S&F 150 mm long mild steel barreltower bolt, stove enameled black with bright bolt complete all as specified anddirected. |
| 49 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedlength of bolt 250 mmcomplete all as specified and as directed. |
| 50 | S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. |
| 51 | M&L for Pre-cast cement concrete cover slab for manhole and drain coverin plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4with plain facescomplete all as specified and as directed |
| 52 | TMT Bars 10 mm dia and over cut to length bent to shape reqiured, incl cranking, bending spirraly for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9m dia or securing with clips. |
| 53 | S & F vitreous China Wash Hand Basinwhite, counter top size 570 x 420mm including 15mm dia pillar tap, cast copper alloy, with capstan head CP, screwed down high pressure withor without letter Hot or Cold with long screwed shank and fly nut including PVC waste pipe 32mm bore and PVC connection suitable for 15mm bore pipe 60cm long with nut and washers at both ends andCP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25X25X3mm thick angle iron of required length fixed to wallwith PCC type B-0 (1:2:4)including cutting for a pinning in a brackets complete all as directed by Engr-in-Charge. |
| 54 | S & F forPVC low level flushing cistern 10 Ltr capcity Valve less duel symphonic action type, flushing cistern, low level white with inlet ball valve flat and handle including PVC flush pipe 32mm bore andcomplete all as directed . |
| 55 | S & F hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 56 | S & F squatting pan vitreous china orrisa pattern of Size 580mmx440mm \"white\" with integral foot rest (Excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete all as specified and directed. |
| 57 | S & F for PVC waste coupling 32mm dia PTMT (half or full threaded) suitable for WHB/Sink (min weight 450 gms), completed all as specified & directed |
| 58 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 59 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long |
| 60 | S & F Tubular Towel Rail 600mm long PTMT fixed with and including Chromium Plated brass screws and wooden/ plastic cleats (Minium weight 90 gm) |
| 61 | S&F Soap dish, vitreous china white approximate size 160X160X90mm complete all as specified & directed |
| 62 | S&F Toilet paper holder, vitreous china box type complete all as specified & directed |
| 63 | S&F Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm) |
| 64 | S&F PVC connection 15 mm dia 600mm long with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 65 | S&F 15mm dia of fancy type chromium plated Anglestop valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 66 | S&F 15 mm dia bib tap cast copper alloy CP fancy type with capstan headlong body and cup screwed down for iron pipe all complete all as specified and directed. |
| 67 | M&L for Prepolisheddesigned and coloured chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx22 to 25mm thick set & jointedwith cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6)and pointed with grey cement, complete all as specified & directed. |
| 68 | M&L for plain cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in coping, benching including necessary form work complete all as specified and directed. |
| 69 | S & F 500 liters rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet and ball valve (float valve) complete as specified. |
| 70 | Cutting into existing manholes for connecting new drains of Internal dia of pipe in 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required |
| 71 | Supply and laying 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc all as specified and directed. |
| 72 | Supply and laying 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc all as specified and directed. |
| 73 | S&F20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 455 gms) complete all as specified and directed. |
| 74 | M&L for 20 mm dia Gate valves with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 75 | Material and labour for Point wiring with 1.5 Sqmm FR PVC insulated and sheathed multi stranded (FRLSH) copper conductor cable inand incl rigid PVC conduit concealed with sunk cast iron/pressed steel terminal boxes ofadequate size with suitable thickness hylum laminated sheet, coverofadequate size for one light or one fancontrolledby one switch incl 1.5 Sqmm (FRLSH) PVC insulated andunsheathed multi stranded copper conductor cable as earth wire (green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note : (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc(b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed |
| 76 | S&F Metal flush Box 4 Module, complete all as specified and directed by Engr-in-charge |
| 77 | S&F Modular Plate 4 module White cover plate with frame, complete all as specified and directed by Engr-in-charge |
| 78 | M&L for Modular switch 6 A One way switch white, complete all as specified and directed by Engr-in-charge |
| 79 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 80 | Supply of surface mounted batten type, slim LED luminaires 20 W, 220 - 240 V AC, 50 Hz, IP 20 with aluminium extruded housing, polycarbonate diffuser & end caps,minimum efficacy 100 lumens/watt with 120 degree viewing angle, CCT 6500, CRI ≥ 80, power factor ≥0.9, IP 20, surge protection 4.0 KV, THD < 20% integral electronic driver with short circuit protection and open circuitprotection, surge voltage protection completeall as specified and directed. Make : Havells (Type- LUMILINE NXT BATTEN)/ Philips/ Jaquar (Type- Glaze) |
| 81 | S&F MCBSP 6 to 20Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified & directed. Type ‘C’ CharacteristicMake : ABB/ Legrand/ Siemens. |
| 82 | S & F for Mild steel rag or lewis bolts screwed one end with hexagonal or square nut and washer and other end enlarged and jagged or lewised not exc 15cm long, Dia of bolt 12 mm complete all as specified and directedby Engr-in-Charge. |
| 83 | M & L for MS plates, plain or chequered, cut to shape, hole drilled & welding with connected members complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F for Framed work such as grills,gratings,etc with ends of bars shouldered and/or riveted or forged into spikess; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge. |
| 85 | M&L two coats of cement based paint on plastered surfaces in preparation of surfaces on walls complete all as specified and directed by Engr-in-Charge. |