|
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed. |
| 2 | M&L for Brick work with Fly ash brick, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 3 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, and the like including weathering, slightly rounded or chamfered angles with & including necessary use and waste of form work for fair faces of concrete |
| 4 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries all specified and directed. |
| 5 | M&L for 15 mm thick cement plaster with ready mix plaster (as per manufacturers instruction) on brick work and concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 6 | Complete removal of existing treatment of old painted wall surface including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and cleaning with water complete all as specified and directed by Engr-in-charge. |
| 7 | M & L for preparation of newly plastered/untreated surfaces of wall and applyingtwo coats of cement base paint over with roller complete all as specified and directed. |
| 8 | M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 9 | S&F Steel frame work fabricated with rectangular / Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to to IS-4923 erect & fixed in any position complete all as specified & directed. |
| 10 | Dismantling of Plain or corrugated steel sheeting any gauge, thickness, in roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 11 | S&F 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall or roof, fixed with self drilling / tapping screws as specified and as directed by Engineer-in-charge |
| 12 | S&F Pre- painted galvalume aluminum zinc coating GI based plan steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self drilling / tapping screws specified complete. |
| 13 | Dismantling RCC posts or struts embedded in concrete, brick work, masnory, etc (R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 14 | Dismantlingchain link fencing fixed with steel or wood fillets, of any type complete all as specified. |
| 15 | Excavation in post holes each n.exc 0.5 Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to ad distance n.exc 50 m and making good surface. |
| 16 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone) as in foundation and mass concrete, complete all as specified and directed. |
| 17 | M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 18 | Supply only chain link fencing of galvanized steel wire of any dia / aparure as directed, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed.Note:- Fixing only fencing will be measured and paid separately. |
| 19 | Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc.Note: (i) Supply only fencing, will be measured and paid separately.(ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately. |
| 20 | Supply and fix 10 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire including applying two coats aluminium paint over one coat red oxide primer after preparation of surfaces all as directed. |
| 21 | S&F Mild steel screw bolts (machine made) of 10 mm dia of sank with hexagonal or squre head at one end & screw the other or screwed both end (as directed)each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long, complete all as specified and directed. |
| 22 | M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10 cm in width or girth complete all as specified & directed. |
| 23 | M&L for preparation of old painted steel or steel based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 24 | Supply and fix in repair galvanised 2 strend steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of strails straining bolt including securing or tying at crossing with and provn of galvanised mild steel wire staple or steel pins etc complete all as specified as directed. |
| 25 | Restraining / resecuring including making good staples galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.Note: Each line wire to be measured. |
| 26 | Material and Labour forcleaning of blockage from WC (pedestal / squatt pattern) upto 1st manhole and making the drian pipe of any size full functional by flushing with water, including cleaning of 1st manhole and removing the waste material / sludge etc out side MD land complete all as specified and directed by Engr-in-Charge.Note:- The work shall be carried out as and when complaint is received from user and all the complains shall be completed same day. |
| 27 | Material and Labour for cleaning of blockage from floor trap of bath room & kitchen etc up to 1st manhole including cleaning of gully / trap and removing the waste material / sludge etc outside MD land complete all as specified and directed by Engr-in-charge.Note:- The work shall be carried out as and when complaint is received from user and all the complains shall be completed same day. |
| 28 | Material and Labour using all type oftools & machinery etc for temporarily blocking of inlet of manhole etc, of any description / size depth of manhole exc 0.50 metre but not exc 1.5 metre, with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the manholes complete and cleaning the manholes with fresh water by mechanically spray machine including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. Note:- (i) Sewage water / sludge shall be removed from manhole with disel engine operated Pump.(ii) Sewage water / sludge removed from manhole shall be collected in tractor mounted closed tank and shall be disposed at outside MD land. |
| 29 | All as per Item No 28 above but depth of manhole exc 1.5 metre but not exc 3.00 metre |
| 30 | All as per Item No 28 above but depth of manhole exc 3.0 metre but not exc 4.5 metre |
| 31 | Material and Labour using all type of tools & machinery etc for temporarily blocking of 150 mm bore sewage line with suitable wooden plugs / gunny bags and cleaning the same by rodding and removing the sludge along with brick bats / stones / broken bottles / any other foreign materials etc complete and cleaning the sewage line with fresh water by mechanically spray machine all as directed by EIC and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. |
| 32 | All as per item No 31 above but 200 mm bore sewage line |
| 33 | Material and Labourusing all type of tools & machinery etc for temporarily blocking of inlet of septic tank of capacity 50 Users, of any description, with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the septic tank complete and cleaning the septic tank with fresh water by mechanically spray machine including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. Note:- (i) Sewage water / sludge shall be removed from septic tank with disel engine operated Pump.(ii) Sewage water / sludge removed from septic tank shall be collected in tractor mounted closed tank and shall be disposed at outside MD land.(iii) Cleaned area shall be sprinkled with Bleaching powder or any disinfectant to remove gers and bacterias. |
| 34 | All as per Item No 33 above but capacity of septic tank 100 users to 200 users. |
| 35 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard dense soil complete. |
| 36 | Removing excavated soil to a distance not exc 50 m and depositing where directed at level n exc 1.5 m above the starting point. |
| 37 | Returning, filling in including spreading levelling watering and well ramming in layer n.exc 25 cm thick using excavated soil all as specified and directed. |
| 38 | Demolition and breaking up 100 mm dia bore sewage / drain pipe / RCC hume pipe including PCC packing under haunching against the sides of pipe bed and complete PCC of bed all specified and directed. |
| 39 | Demolition and breaking up 150 mm dia bore sewage / drain pipe / RCC hume pipe including PCC packing under haunching against the sides of pipe bed and complete PCC of bed all specified and directed. |
| 40 | Demolition and breaking up 200 mm dia bore sewage / drain pipe / RCC hume pipe including PCC packing under haunching against the sides of pipe bed and complete PCC of bed all specified and directed. |
| 41 | M&L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as inbed to drain pipes of 100 mm bore dia including packing uner, and haunching against the sides of pipes after they are laid and tested in, complete all as specified and directed. |
| 42 | M&L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as inbed to drain pipes of 150 mm bore dia including packing uner, and haunching against the sides of pipes after they are laid and tested in, complete all as specified and directed. |
| 43 | M&L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as inbed to drain pipes of 200 mmbore dia including packing uner, and haunching against the sides of pipes after they are laid and tested in, complete all as specified and directed. |
| 44 | S&F 110 mm outer dia PVC (SWR) drain pipe single socketed in any length, with rubber ring joints, laid in trenches, as in sewage line, complete. |
| 45 | Supply and laying 150 mm Dia bore HDPE, DWC (double wall corrugated) pipe, class SN8, (8 kN/m²), confirming to IS:16098, laid and jointed with and including elastomeric sealing \"O\" ringas per manufacturer\"s instructions, laid in trenches as in sewage line, including testing complete all as specified and directed. |
| 46 | Supply and laying 200 mm Dia bore, HDPE, DWC (double wall corrugated) pipe, class SN8, (8 kN/m²), confirming to IS:16098, laid and jointed with and including elastomeric sealing \"O\" ringas per manufacturer\"s instructions, laid in trenches as in sewage line, including testing complete all as specified and directed. |
| 47 | M&L for cutting & removing 100 to 200 mm dia drain pipe from existing manhole and inserting new drain pipe of same dia, making good disturbed surface & benching with cement concrete 1:2:4 type B-1, complete all as specified & directed. (new drain pipe will be measured & paid separately. |
| 48 | S&F in repair 110 mm outer dia PVC (SWR) pipe single socketed in any length with rubber ring joints, fix to wall with clamp, including taking down existing unservicebale pipes, complete all as specified and directed. |
| 49 | S&F in repair 150 mm outer dia PVC (SWR) pipe single socketed in any length with rubber ring joints, fix to wall with clamp, including taking down existing unservicebale pipes, complete all as specified and directed. |
| 50 | S&F 110 mm size PVC (SWR)bends any radius complete all as specified. |
| 51 | S&F 150 mm size PVC (SWR)bends any radius complete all as specified. |
| 52 | Supply & fix factory made kerb stone of M-25 grade cement concrete fixed in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, including taking down old kerb stone complete all as specified & directed. |
| 53 | M&L for Filleting in any position and any shape in cement mortar 1:4 or PCC 1:2:4 type Bo, including all mitres, stops, etc. Sec of fillet n.exc 25 Sqcm. |
| 54 | M&L for preparation of new concrete surface of walls / stone kerb of any description and applying two coats of synthetic enamel paint without showing signs of brushes mark over one coat of primer complete all as specified and directed. |
| 55 | Demolition of cement concrete unreinforced in ground floor and paving exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 56 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed including dismantling and removal of existing paver blocks, complete all as specified and directed. |
| 57 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 58 | Material and labour for 1st / premium quality coloured vitrified outdoor, parking tiles of approved shade, of size 300 mm x 300 mm x 10 mm thick as in floors / path etc, set &jointed in neat cement slurry & pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 59 | M&L for chequered cement concrete tiles glossy finish PV mould of size 30 cm x 30 cm x 25 mm thick, with gray cement and pigment set & jointed with gray cement slurry and pointed with gray cement & pigment laid over and including 15 mm thick screed bed in CM 1:6 as in floors complete all as specified. |
| 60 | M&L for premium / 1st quality glazed cerimic elevetion tiles with convex surface, of size 75 mm x 150 mm x 6 mm thickness at edge and 10 mm thick at center as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 61 | M&L for 18 to 20 mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round molding of exposed edge, laid over and including screed bed 15 mm thick in cement mortor 1:4 including demolition of old granite work complete all as specified and directed.Note : Quoted rate shall be deemed to include cast of screed bed.complete all as specified. |
| 62 | M&L for 75 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate,as in Sub base / path / flooring complete all as specified and as directed. |
| 63 | M&L for 100 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate,as in Sub base / path / flooring complete all as specified and as directed. |
| 64 | M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm gradedstone aggregate as in floor, finish the surface fair & even complete. |
| 65 | M&L for Forming contractionjoints (Dummy) in concrete floor of size 35 mm deep x 8 mm wide priming & filled with bitumen & sand ( 1:1 by weight) complete all as specified and as directed. |
| 66 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed. |
| 67 | M&L for Precast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole/ drain cover and similar works supported on walls and set in cement mortar 1:4 including demolition of old cover slab complete.Note:- Reinforcement steel will be measured & paid separately |
| 68 | M&L for steel reinforcement of TMT bars (Fe-500 Grade) 8 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed. |
| 69 | Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 70 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work and demolition of old PCC complete all as specified and directed. |
| 71 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 72 | Add or deduct to item No 71 above for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 73 | M&L for one coat Painting floors with ready mixed paint, for use on floors complete all as specified and directed. |
| 74 | S&F 2 mm thick Fibre glass reinforced translucent, plan sheeting with 100 mm side lap & end lapas in roof covering, fixed with self drilling / tapping screws complete all as specified and as directed. |
