|
| 1 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places as per specification |
| 2 | Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU |
| 3 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formedwire armoured (strip) cable 1100 V, 3 core 10 sq. mm. aluminium conductorcomplete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no |
| 4 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formedwire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductorcomplete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification |
| 5 | Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification |
| 6 | Supplying & erecting single compression type brass cable glands for 4 core35 Sq.mm./3 core 50 Sq.mm. for XLPE armoured cable as per specification |
| 7 | Supplying & erecting crimping type aluminium lugs for cable 35 sq mmcomplete as per specification |
| 8 | Supplying & erecting crimping type aluminium lugs for cable 25 sq mmcomplete as per specification |
| 9 | Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosingXLPE armoured cable on wall/pole as per specification |
| 10 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification |
| 11 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification |
| 12 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification |
| 13 | Supplying, erecting & marking DPMCB 40A to 63A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecificationon. |
| 14 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification |
| 15 | Supplying and erecting quartz electronic time switch having 24 hour dial towork on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteriesto run the time switch on failure of supply having switch contact rating up to 16Ato use independently or in conjunction with contactor |
| 16 | Supplying and erecting four pole power contactor 430 V, 40 A for time switchcomplete erected on provided wooden block/ box, with necessary materials. |
| 17 | Supplying & erecting LED type indicating pilot lamp with LED colour blue,230 / 250 V on provided box / panel with necessary material, wiring &connections etc |
| 18 | Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350microns with galvanization process compliance to IS 2629:1985 to be usedfor fabrication of boxes panel boards etc. including cutting, bending, drilling,welding, riveting etc. and painting with one coat of red lead paint and 2 coats ofenamel paint. |
| 19 | Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete erected at the position with necessary materials dulypainted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority. |
| 20 | Making trench in Hard murum/Tar road having 0.75 m depth andminimum 0.3mtr width as per IS for laying provided cables up to voltage level1.1Kv cable complete as per specification |
| 21 | Making M- 20 grade reinforced cement concrete foundation by consideringthe safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply ofsteel, concrete, excavation, fixing provided nut bolts with the help of template,duly plastered as per design complete (for 3 to 5m octagonal / conical GIpole). |
| 22 | Making M- 20 grade reinforced cement concrete foundation by consideringthe safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supplyof steel, concrete, excavation and fixing provided nut bolts with the help oftemplate, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole). |
| 23 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm.stone metal duly plastered with necessary curing for complete. (pole muffing orany other purpose). |
| 24 | Providing & erecting 4 m high (clear height) galvanised octagonal pole withfoundation bolts having bottom of 130 mm A/F, top 70 mm A/F on providedfoundation as per specification |
| 25 | Supply and erecting 9m (clear height) Fixed type high-mast (Top-100mm,Bottom- 200mm) with hexagonal /round bracket and foundation bolts suitable formax. 4 nos. flood light fixtures on provided foundation as per specification no.OH-PL/OPL (excluding luminaires). |
| 26 | Supplying and erecting integrated LED Post Top 45W IP65 & IK10 classhaving die cast aluminium housing with UV protected polycarbonate diffuser,having system lumens output of Min.4500 Lumens, min. efficacy of 100lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 ,including driver complete with 2 Year warranty as per specification |
| 27 | Supplying and erecting integrated LED flood light fitting Max. 120W IP65 &IK07 class having pressure die-cast aluminium housing |
| 28 | Painting of steel tubular / rail / RSJ pole above 6.0 m length along withstreet light pole brackets, clamps etc by scrapping the existing paint completeas per specification |
| 29 | Painting identification number by indelible ink marker / enamel paint onfittings / equipment with the help of ladders if necessary by dismantling andrefitting the enclosures, tubes etc if required the same and refitting complete. Please Enable Macros to View BoQ information |
