|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcandremoval of entire debris as ordered outside MD land complete all as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in any description & in any position anythick above or below ground level andremoval of entire debris as ordered outside MD land complete all as directed. |
| 3 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stackingserviceable tiles at site andremoval of entire debris as ordered outside NGV Premises complete all as directed. |
| 4 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris to a distance not exceeding 50 mts and depositing where directed. |
| 5 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. |
| 6 | All as per item 5 here-in-above but exceeding 1.5Sqm but not exceeding 4 Sqm each |
| 7 | Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed. |
| 8 | All as per item No 7here-in-above butnot exceeding 1Sqm each -do- |
| 9 | Dismantling wall and ceiling board fibre, uplp insulation etc or insulation boards any thickness including cover fillets completeall as directed. |
| 10 | Dismantling of ACCorrugatedor semi corrugatedsheet etcanythicknessincluding ridges as in roof covering and stacking at site at site for creditwhere directedand removal of debris to a outside MOD land and depositing where directed complete all as directed. |
| 11 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar ,stackingserviceable slbs at site andremoval of entire debris as ordered outside MOD land complete all as directed. |
| 12 | Taking downeaves gutters and rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etcall as specified and directed. |
| 13 | Providingcement concrete Type B1 1:2 :4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts , boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 completeall as directed. |
| 14 | M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified. |
| 15 | M&L for Cutting chases, pinning in stone concrete block or slab walls andmaking good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified |
| 16 | Supply onlyIntegral Water Proofing Compound (ISI Marked) liquid of Make : CICO,Acco Proof, Impermo, Aqua flex as approved. |
| 17 | S &F35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats. |
| 18 | S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack allas specified. |
| 19 | S&F factory made pressed steel frames of size 105 x 106mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete all as directed. |
| 20 | S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness, complete as specified & as directed |
| 21 | S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed. |
| 22 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.. |
| 23 | M&L for 18/19mm thick medium density fibreboard,flat pressed , singlelayer type or three layertype withBWR type adhesive , fixedwithscrews toframeworkincluding necessary joining cleats , glazing clips , rubber neoprene packing , powder coatedaluminium snap beading , screws etccomplete all as specified & as directed.(Note: Quoted rate isdeemed tobeinclusive of fixingtheboard intothealuminium frame & otherfixingelements & fixing it into therequired places as a partion ). |
| 24 | S&F powder coatedaluminium window and ventilator shutter, side hung type without sash or sliding type, aluminium sections weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long(2 no) suitable handle (1 no) complete all as specified. |
| 25 | S&Faluminium powder coated (minimum thickness of powder coating 50 micron) frames, sliding guide channels forshutter for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed. |
| 26 | S & F aluminium grill ( anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm centre to centre, including cuttings the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standardsection around the opening, all complete as per requirement and as directed. |
| 27 | S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 28 | S & F in repair 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 29 | S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed . |
| 30 | S&F75 mm size butt hinges, medium weight cold rolled mild steel and fixed . |
| 31 | S&F in repair150 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. |
| 32 | S&F in repair100 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. |
| 33 | S&F in repair300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 34 | S & F 100mm in repairs aluminium anodised, hasp and staple, safty type, with hinge pin,including bolt to hinge plate and fixed with screws complete all as directed. |
| 35 | S&F in repair mortice lock, 100mm size, brass, vertical type, 4 lever with minimum 2 keysall as directed. |
| 36 | S & Fmagnetic / Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed completeall as directed. |
| 37 | S & F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified |
| 38 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long be-tween flanges complete all as directed including taking down old towel rail. |
| 39 | S&Faluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesincluding supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed. |
| 40 | S&F in repairs aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesincluding supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed. |
| 41 | S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing given in SSR.Note :- PVC fillets & PVC strips shall be measured and paid for separately. |
| 42 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR. |
| 43 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed |
| 44 | S&F Gl frame work of grid size 605mmx605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engineer-in-charge. |
| 45 | M&Lfor 4mm thick Nonasbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete |
| 46 | M & L for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed |
| 47 | M&L for applying APP modified water prrofing membrane as per IS 1654-2017/IS 16352-2017 mineral finish, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer\"s instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. |
| 48 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed |
| 49 | Supply and fix Pre- painted galvalume aluminum zinc coating GI plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction all as specified and as directed. |
| 50 | Supply and fixing 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified & as directed. |
| 51 | M & L for 75 mm thick plain cement conctere 1: 3 : 6type C2 using 40 mm graded crushedstone aggregateas in sub base offlooringcomplete all as directed. |
| 52 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floor and finished the surface complete all as directed. |
| 53 | M & L non-skid coloured joint freeceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. |
| 54 | All same as per item No 53 here-in-abovebut tiles of size exceeding 0.11 Sqm butnot exceeding 0.18 Sqm as in skirting but tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 -do- |
| 55 | S&F vitrified ceramic tiles 10mmmm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to matchwith tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. |
| 56 | S&F vitrified tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with tiles laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all directed and specified. |
| 57 | M&L glazed ceramic designer tiles any shade or pattern as approved of size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcompleteall directed. (Note for item Nos 53 to 57 : i) Quoted rateis deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement). |
| 58 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over andincluding15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rateis deemed to be inclusive of cement screed.) |
| 59 | M&L forrendering 15 mm thick in cement mortar 1:4 on fair faces of brick work/ stone work or concrete surfaces mixed with WPC as per manufacturer instruction, and finished the surface fair and even complete all as specified and directed. |
| 60 | M&L for rendering 15 mm thick in CM 1:6 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. |
| 61 | All as per item No 60 here-in-above but 10mm thick in CM 1:3 on ceiling,chajja,roof projection etc -do- |
| 62 | M&L for preparation of old plastered / decorated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotsand appyling one coat of acrylic Oil Bound Distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required as specified |
| 63 | All sameas per itemNo 62 here-in-above but on ceiling -do- |
| 64 | M&L preparing new plasteredsurfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty as ordered complete all as specified. |
| 65 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete ll as directed. |
| 66 | M&L preparing new plastered wall surfaces & apply distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats over a coat of 1 to 2 mm thick Birla white cement based wall careputty complete all as specified. |
| 67 | S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane completeall as directed. |
| 68 | S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each panecompleteall as directed. |
| 69 | M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed. |
| 70 | M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 71 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of Ist quality synthetic enamel paint all as specified and as directed . |
| 72 | All same as per itemNo 71 here-in-above but on old steel surface -do- |
| 73 | Taking down old rusted / wornout 15 mm bore GI tubing and connections laid/fixed in any descriptionafter necessary disconnection complete all as directed. |
| 74 | Taking down old rusted / wornout 20 mm bore GI tubing and connections laid/fixed in any descriptionafter necessary disconnection complete all as directed. |
| 75 | S&F16 mm outter diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. |
| 76 | S&F20 mm outter diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. |
| 77 | S&F in repair 15mm dia cast copper alloyBib taps fancy type ,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed. |
| 78 | S&F in repairs stop valves/angle valve, cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed |
| 79 | S&F in repairs stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 20mm bore of complete all as specified and directed. |
| 80 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all aspects all as specified. |
| 81 | S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified & as directed. |
| 82 | S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA |
| 83 | S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule andfixed in repairs complete all as specified. |
| 84 | S&F in repairs brass chromium plated shower rose and arm125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : CERA Cat No F 7020304 or equivalent of Make Hindware/Parryware/Prayag |
| 85 | S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all asspecified and directed. |
| 86 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.all as specified and directed |
| 87 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 88 | S&F in repair sinks withdrainage board made of stainless steel( gde 304) 1mm thick kitchen or laboratory withbrass cap rubber plug, washers and wastage includding beddingin cement mortar to dwarf wall or including fixing cantilever brackets & connecting uion topipeoverall size (Approximate) 915mm x 460mmx203mm bowl size 405mm x 354mm x 203mm Make :Nirali, Elegance(regular) Rangeequivelent ofPRAYAG /Diamond |
| 89 | S&F in repairs 600mm x 450mm looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified.. Make: Gold fish / Atul / Modi / Triveni Glass |
| 90 | S&F in repairsfor providing15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 91 | S & F in repair 110 mm bore, PVC (SWR), pipe single socktedpipes in any length, with rubber ring joints laid in trenches complete all as specified and directed. |
| 92 | S & F in repair 75 mm bore, PVC (SWR), pipe single socktedpipes in any length, with rubber ring joints laid in trenches complete all as specified and directed. |
| 93 | S & F in repair 110 mm bore, PVC (SWR), pipe single socktedpipes in any lengthfor rain water pipe in any lengthwithout ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed. |
| 94 | S & F in repair 75 mm bore, PVC (SWR), Type \"B\", Soil waste and vent pipes or for rain water pipe in any lengthwithout ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed. |
| 95 | S & F 110 mm bore, PVC (SWR) bends complete all as specified and directed. |
| 96 | S & F 75 mm bore, PVC (SWR) bendscomplete all as specified and directed. |
| 97 | S&F 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed. |
| 98 | S&F 75 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed. |
| 99 | S&F 550 mm X 400 mm size white flat backvitreous china wash hand basin including chromium plated pillar tap (Make: CERA Cat No. S1053101/S1053102 6502) cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitablewashers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected. |
| 100 | S&F in repairs for vitreous china urinals, bowl type (back or corner wall type) of size 465x355x265mm white with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outletetc complete all as specified and directed . |
| 101 | S & F in repairsPVC seat cover for EWC white / Black colour complete with MS Hinged cromium plated make as per existingall as specifiedand asdirected |
| 102 | S&F in repairs flush pipes PVC 32mm dia for low level flushing cisten to pedestal pan, including all joints, cones, India rubber (nozzles of W.C pans) all as specified and directed. |
| 103 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe including 10 literscapacitylow level flushing cistern , antisyphonage pipe withPVC connection pipe 15 mm dia 600 mm long etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified |
| 104 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low levelPVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag |
| 105 | S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetyleneof low or high density or 32 mm dia PVC connection pipe complete all as directed.Make of cistern CERA Cat No B1010109 or equivelant of PARRYWARE/HINDWARE/PRAYAG |
| 106 | Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site andS&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing complete all as directed. |
| 107 | Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site andS&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing complete all as directed. |
| 108 | Cleaning and removing accumulated sludge/dirt scales from tank bottom, side and from mouths of circulating pipes of service PVC tank of capacity incl draining out water, not exceeding 500 ltrs, located on roof of the building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground \" CLEANED ON ( DATE)\" height of the words 100mm, complete all as specified and directed. |
| 109 | All sameasper itemNo 108 here-in-above but ecxeeding 500 liters capacity PVC tank -do - |
