|
| 1 | CHAIR DINNING CUSHIONED (TP) : M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as directed by Engr-in-Charge. |
| 2 | S&F of top rails made of teak wood/Hard wood |
| 3 | S&F of rails of stiffners made of teak wood/Hrad wood |
| 4 | S&F of rails of front legs made of teak wood/Hrad wood |
| 5 | S&F of rails of rear legs made of teak wood/Hard wood |
| 6 | S&F Seat made of 12 mm Comercial Plywood & 50mm thick synthetic foam of 32 density covered with tapestry cover (Cost not less than Rs 250/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as directed. make of foam- Rajfoam/MM foam/Sleep well. |
| 7 | M&L for polishing of Chair dining with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 8 | FOLDING CHARPOY (TP).M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as specified and directed. |
| 9 | Removing of old U/S plytop of charpoy and supply and fix of new plytop of 1875x900x12 mm thick commercial plywood BWR as existand as directed by Engineer-in Charge. |
| 10 | M&L for welding of broken pipe of charpoy Folding IP by MIG type welding without disturbing the other parts of charpoy. |
| 11 | M &L for painting of folding charpoy with legs by applying one coat of synthetic enamal paint OG as directed by Engineer-in Charge. |
| 12 | CHAIR COMPUTER (510x410x800mm) (TP).M&L for repair & replacement of the following components of chair computer complete all as directed by Engineer-in-Charge. |
| 13 | Removing of existing old worn out/unserviceable tapestry cloth, foam, etc from seat of chair and providing new tapestry cloth, over new polyurethane foam cushion 75 mm thick, 40 density and cloth fixing in shape all as per existing with necessary PVC beading wherever required as per design of existing chair. Make of foam - SLEEP WELL/KURLON/SWEET DREAM. |
| 14 | Removing existing old worn out/unserviceable tapestry cloth, foam etc from back and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and cloth fixing in shape all as per existing with necessary PVC beading wherever required as per design of existing chair. Make of foam - SLEEP WELL/KURLON/SWEET DREAM. |
| 15 | M&L for replacement of broken base of computer chair with the new base with castor wheels as exists and as directed by Erngineer-in-charge |
| 16 | M&L for replacement of old unserviceable Hydraulic spindle with new hydraulic spindle make as approved by GE and as directed by Engineer- in-charge |
| 17 | M&L for removing old unserviceable Handle of chair computer and S&F new handle as exists and as directed by Engineer-in-charge. |
| 18 | SOFA SET 5 SEATER (3+1+1) (TP). M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as existing and directed. |
| 19 | M&L for replacement of existing foam cushion forback of sofa set (5 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/-per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well (In one Set =05 Nos Back cushion) |
| 20 | M&L for replacement of existing foam cushion for seat of sofa set (5 seater).The cushion shall be made of flexi polyurethane foam of 40 density 75mm thick with extra padding of 20 mm thick polyurethane foam of existing shape & size and with tapestry cloth (cost not less than Rs 350/-per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as specified . The seatcushion frame shall be fixed on existing wooden frame all asexisting and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well (In one Set =05 Nos Seat cushion) |
| 21 | M&L for repair and replacement of wooden arm of sofa set with new Teak Wood arm of existing shape & sizewithout disturbing to other component duly french polished complete all as per existing and directed. |
| 22 | M&L for repair and replacement of wooden batten of sofa set with new Teak Wood batten of existing shape & size without disturbing to other component duly french polished complete all as existing and directed. |
| 23 | M&L for repair and replacement of wooden long rail of sofa set with new M.P.Teak Wood/Hard wood long rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed. |
| 24 | M&L for polishing of five seater Sofawith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 25 | SOFA CHAIR (TP).M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as existing and directed. |
| 26 | M&L for replacement of existing foam cushion forback of sofa chair.The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth ,shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all asexisting and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well |
| 27 | M&L for replacement of existing foam cushion for seat of sofa chair.The cushion shall be made of flexi polyurethane foam of 40 density 100mm thick of existing shape & size and with tapestry cloth , shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as specified . The seatcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well. |
| 28 | M&L for polishing of Single seater Sofawith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 29 | TABLE CENTRE WITH GLASS TOP |
| 30 | Supply and fix in replacement of Glass top of Centre tableas per existing pattern and design and all as directed.. |
| 31 | M&L for removing old unserviceable legs of Centre table with Glass top and S&F new leg of first class teak wood as exists and directed. |
| 32 | M&L for polishing of table centrewith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 33 | PEG TABLE WITH GLASS TOP |
| 34 | Supply and fix in replacement of Glass top of Peg tableas per existing pattern and design and all as directed.. |
| 35 | M&L for removing old unserviceable legs of peg table with Glass top and S&F new leg of first class teak wood as exists and directed. |
| 36 | M&L for polishing of table pegwith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 37 | BED HARD SINGLE (TP). M&L For Repair & Replacement of the following part without disturbing the other components including tightining of frame all as per exisiting and directed by E-in –Charge:- |
| 38 | S&F 12mm thick BWR type plywood for bed hard as exisits and directedby Engineer-in -Charge. |
| 39 | S&F 1st class teak wood (M.P)/Hard wood head board side legs as per exisiting and directedby E-in -Charge. |
| 40 | S&F 1st class teak wood (M.P)/Hard wood foot board side legs as per exisiting and directed by E-in -Charge. |
| 41 | M&L for polishing of Bed Hard with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 42 | CHARPOY GI PIPE WITH PLY TOP(TP).M&L for repair & replacement of the following components of charpoy G I pipe with Ply Top complete all as directed by Engineer-in-Charge |
| 43 | Removing of old unsv/broken plytop from charpoy G I pipe supply and fix new plywood BWR type BB (No.of ply -7),ISI marked,of size 1950 mmx960mm,12 mm thick all as directed by Engr-in Charge.Make of plywood:Duraply/Century/Archid ply/Bhutan board/Durain/Mysore chip Board Ltd. |
| 44 | M&L for welding of broken long rails,Short rails,Leg and stiffeners etc.. of charpoy by MIG type welding without disturbing the other parts of charpoy. |
| 45 | CHAIR CBA STEEL (500*900).M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as specified and directed. |
| 46 | M&L for replacement of existing Rexene cover for back of chair, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . |
| 47 | M&L for replacement of existingrexene cover for seat of chair, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . |
| 48 | S&F 50mm thicksynthetic foam of 40 density for Seat of chairall as per existing and directed by Engr-in-Charge. Make of foam-Kurlon/Sweet dream/Sleep well. |
| 49 | S&F 50mm thicksynthetic foam of 40 density for Back of chairall as per existing and directed by Engr-in-Charge. Make of foam-Kurlon/Sweet dream/Sleep well. |
| 50 | M&L for replacement of existingarm rest of chair, s&F new arm rest as exists. |
| 51 | EXECUTIVE CHAIR |
| 52 | M&L for replacement of existing Rexene cover of seat,back and handle of Executive chair, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . |
| 53 | M&L for replacement of broken base of luxry chair with the new base with castor wheels as exists and as directed by Engineer-in-charge |
| 54 | M&L for removing old u/s hydraulic spindle of executive chair and S&F new hydraulic spindle of superior quality as exists and as directed. |
| 55 | STOOL STEEL |
| 56 | M&L for replacement of existing Rexene cover for seat of stool, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . |
| 57 | M&L for Painting of stool steel after smoothing of surface with one coat of Black enamel paint complete all as specified and directed |
| 58 | WRITING CHAIR : M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as directed by Engr-in-Charge. |
| 59 | S&F of top rails made of teak wood/Hard wood |
| 60 | S&F of rails of stiffners made of teak wood/Hrad wood |
| 61 | S&F of rails of front legs made of teak wood/Hrad wood |
| 62 | S&F of rails of rear legs made of teak wood/Hard wood |
| 63 | S&F Seat made of 12 mm Comercial Plywood & 50mm thick synthetic foam of 32 density covered with tapestry cover (Cost not less than Rs 250/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as directed. make of foam- Rajfoam/MM foam/Sleep well. |
| 64 | M&L for polishing of Chair writing with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 65 | STEEL BEDSIDE LOCKERM&L for repair & replacement of the following components AlmirahSteel with Shelves complete all as directed by Engineer-in-Charge. |
| 66 | Supply and fix in replacement 3 way lock,4 levers with duplicate keys MAKE :As per sampleall as existing, approved and directed by Engr-in-Charge. |
| 67 | Supply and fix in replacement of SS handle as per existing pattern and design and all as directed.. |
| 68 | M&L for Painting of Bedside locker after smoothing of surface with one coat of mettalic grey enamel paint complete all as specified and directed |
| 69 | OFFICE/CLERKTABLE (1200x600x750 mm)(TP).M&L for repair & replacement of the following components of Office table with three drawers without disturbing the other components including tightening of frame all as specified & directed. |
| 70 | Top made of 19 mm thick commercial board with 1 mm thick laminated sheet of size 1200x600 mm, edges finished with PVC beading 1.5mm thick as per existing shape and size and directed by Engineer-in Charge. |
| 71 | Supply and fix in replacement SS Handle as per existing, apporoved and directed by Engr-in-Charge |
| 72 | Supply and fix in replacement 3 way lock,4 levers with duplicate keys MAKE : As per sample all as existing, approved and directed by Engr-in-Charge. |
| 73 | Removing U/S drawer. S & F new drawer unit with channel as per existing without disturbing to other component all as directed by Engr-in-Charge. |
| 74 | DINING TABLE 1800x900x750MM M&L for repair & replacement of the following components of Dining tablewithout disturbing the other components including tightening of frame all as specified & directed. |
| 75 | Material and Labour for providingtable top of size 1800mm x 900mm, 38mm thick commercial board and 1mm thick laminatewith lipping polished all round completeall as specified and as directed by Engineer-in-Charge |
| 76 | Ditto all as per srl item No.16.00 above, but leg 70*70*750mm of teak wood complete |
| 77 | Ditto all as per srl item No.16.00 above, but front or rear rail 90*30*1800mm of teak wood complete. |
| 78 | Ditto all as per srl item No.16.00 above,but side rail 90*30*900mm of teakwood complete. |
| 79 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 80 | STANDARD STEEL ALMIRAH Removing the following unserviceable parts of almirah large steel and supply and fixing new one all as specified and directed by the Engineer-in charge:- |
| 81 | Locking device with handle and brass lock complete |
| 82 | Painting of almirah large steel after smoothing of surface with one coat of olive green paint complete all as specified and directed by the Engineer-in charge. |
| 83 | ALMIRAH SMALL Removing the following unserviceable parts of almirah small steel and supply and fixing new one all as specified and directed by the Engineer-in charge:- |
| 84 | Locking device with handle and brass lock complete |
| 85 | Painting of almirah large steel after smoothing of surface with one coat of olive green paint complete all as specified and directed by the Engineer-in charge. |
| 86 | DRESSING MIRROR WITH BOX (TP). M&L for box of table dressing gents made out of Commercial board 19mm thick with veneer face as shown on drawing over all size of box shall be 700x300x200 mm.teak wood beading shall be fixed includingtaking out the old/UNSV parts from Table dressing gentsas shownand as directed by Engr-in-Charge. |
| 87 | All as narrated above but supply & fixingof looking mirror of existing size 620mm wideand 850 mm high 4mm thick along with wooden frameof size 25x20mm thick made to the shape asspecified and directed by the Engr-in- Charge free from distortion and other defects. |
| 88 | All as narrated above but fixing the 6mm thick plywood backing of mirror asspecified and shown on drgs. |
| 89 | Removing of old U/S drawer and supply and fix of new drawer with sliding channel asexists and as directed by Engineer-in-Charge. |
| 90 | Supply and fix in replacement SS Handle as per existing, apporoved and directed by Engr-in- Charge |
| 91 | BED SIDE TABLE :Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:- |
| 92 | Supply and fixing shelves made out of 18mm thick Commercial Boardconfirming to IS specifiation |
| 93 | Supply and fixing sides made out of 18mm thick Commercial Board confirming to IS specifiation |
| 94 | Supply and fixing top made out of 18mm thick Commercial Board confirming to IS specifiation |
| 95 | Supply and fixing 6mm thick commercial ply BWR for back side all as per existing |
| 96 | Supply and fixing heavy duty channels to drawers as per existing and as directed |
| 97 | Supply and fixing CP handle to drawers as per existing and as directed |
| 98 | PEG SET OF SIX |
| 99 | M&L for removing old unserviceable steel peg from Peg Set of Six and supply and fix new steel peg as exists and as directed |
| 100 | BOOK SHELF 1680*840*600MM |
| 101 | M&L for removing old u/slock from book shelf and S&F new lock as exists |
| 102 | EASY CHAIR SET OF THREE M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as specified and directed. |
| 103 | M&L for replacement of existing foam cushion for seat of size 550 mm chair Easy (set of three)).The cushion shall be made of flexi polyurethane foam of 40 density of size 75mm thick of existing shape & size and with tapestry cover of best quality complete all as specified, shown on drg and directed .The seat cushion frame shall be fixed on existing wooden plytop all as existing asnd directed. Make of Foam:- Kurlon/Sweet Dream/Sleepwell. |
| 104 | M&L for replacement of existing foam cushion for back of size 550 mm Chair Easy (set of three).The cushion shall be made of flexi polyurethane foam of 40 density of size 50mm thick of existing shape & size and with tapestry cover of best quality complete all as specified, shown on drg and directed .The seat cushion frame shall be fixed on existing wooden plytop all as existing asnd directed. Make of Foam:- Kurlon/Sweet Dream/Sleepwell. |
| 105 | S&F seat of chair Easy made of 12 mm thick plywood(BWR) of size 540X475 complete all as directed. Make of plytop:greenply,kitply,century. |
| 106 | M&L for repair and replacement ofarm side pad 4 mm plywood and 40 mm cuhions with tapestry cloth of existing shape & size all as specified and directed. |
| 107 | Polishing old surface with onecoat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed. |
| 108 | HATSTAND WITH MIRROR 900X600MMMaterial and labour in replacement of the following components of hatstand with mirror complete all as specified and directed. |
| 109 | Removing of existing old unserviceable broken mirror and supply & fixing new mirror asexists and as directed by Engineer-in-Charge. |
| 110 | Removing old broken/unserviceable base board of hatstand, supply and fixing of new base made of block board 18mm complete as exists & as directed by Engineer-in-Charge. |
| 111 | Removing old/unserviceable CP hook of hatstand, supply and fixing of new peg set complete as per existing & as directed by Engineer-in-Charge. |
| 112 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 113 | COMPUTER TABLE Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:- |
| 114 | Replacement of top of table computer of Commercial board of size1200 x 600 x 18mm thickwith edges finished with 4mm teak wood beading. |
| 115 | Replacement of broken glass pane of size 1200X600X12mm thicknessfor table computer as exists. |
| 116 | Replacement of side of table computer of Commercial board as exists and as directed by Engineer-in Charge |
| 117 | Replacement of key board tray with sliding channel as per existing pattern |
| 118 | Replacement of drawer with sliding channel as per existing pattern |
| 119 | DESK STAND LECTURE 750*600*1350mm Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:- |
| 120 | M&L for for replacing broken front of lecture stand made with 38mm thick ply wood and 3.5mm thick vineer as exists |
| 121 | M&L for for replacing broken sides of lecture stand board made with 38mm thick ply wood and 1 mm thick laminate as exists |
| 122 | M&L for for replacing broken base of lecture stand board made with 38mm thick ply wood and 1 mm thick laminate as exists |
| 123 | M&L for for replacing broken teak wood moulded edges as exists and polish new surface with two coats and old surface with one coat of spirit polish |
| 124 | WALL WOODEN SETTEE 1500*500*450mm Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:- |
| 125 | M&L for for replacing old unserviceable cushion of Wooden wall settee of size 1500*500*50mm with new polyurethene foam cushion of 40 density with tapestry cover (Cost not less than 350/- per Mtr of shade and colour as approved by GE) over a cover of markin cloth of best quality complete. Make of Foam:- Kurlon/Sweet Dream/ Sleepwell |
| 126 | M&L for replacing broken top of sette with 12mm thick commercial ply. |
| 127 | M&L for repalcing the broken 1mm thick lamination of wooden settewith new lamination (shade as approved by GE) as exists and as directed |
| 128 | M&L for replacing the old broken 19mm thick commercial boardwith 1mm thick lamination of wall setteewith new board with 1mm thick lamination as exists and as directd by engineer-in-charge |
| 129 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 130 | PEG TABLEMaterial and labour for providing Leg of teak wood complete of Table Peg and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. |
| 131 | Ditto all as per srl item No.28.00 above, but front/back/side rail of teak wood complete. |
| 132 | Ditto all as per srl item No.28.00 above, but table Top of size 600mm x 400mm made out of 19 mm thick commecial board |
| 133 | Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed |
| 134 | MEDIUM BACK CHAIR |
| 135 | M&L for replacement of existing Rexene cover of seat,back and hanle of medium back chair, (shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as exists and as directed . |
| 136 | M&L for replacement of broken base of medium back chair with the new base with castor wheels as exists and as directed by Engineer-in-charge |
| 137 | M&L for removing old u/s hydraulic spindle of medium back chair and S&F new hydraulic spindle of superior quality as exists and as directed. |
| 138 | NOTICE BOARD/DISPLAY BOARD |
| 139 | M&L for removing old u/s teak wood frame of Display Board and S&F new frame as exists without disturbinng the other parts of display board. |
| 140 | M&L for removing old broken u/s glas shutter of notice/Display board and S&F new 4mm thick plain glass shutter as exists and as directed. |
| 141 | M&L for removing old U/S blazer cloth of Display Board and S&F new blazer cloth (colour as apporved by GE) as exists |
| 142 | DRESSING STOOL |
| 143 | M&L for removing old unserviceable cushion with cover of stool dressing ladies and s&F new cushion with cover 450*450*50mm as exists and dircted by Engr-in-charge. |
| 144 | SIDE BOARD |
| 145 | M&L for removing old u/s broken glass form side board and S&F new 4mm plain glass as exists and as directed. |
| 146 | Removal of broken teak wood base of side board and S&F new teak wood base as exists and as directed. |
| 147 | Removal of broken bow handle from Side board and S&F new SSbow handle as exists |
| 148 | Removal of old u/s back of side board and S&F new back of 6mm thickcommercialply wood as exists |
| 149 | Removal of old u/s top of side board and S&F new top madeof 19mm thickcommercialboard with 1mm thick lamination as exists |
| 150 | Removal of old u/s side wallof side board and S&F new side wall madeof 19mm thickcommercialboardwith 1mm thick lamination as exists |
| 151 | Removal of old u/s divider of side board and S&F new divider madeof 19mm thickcommercialboard as exists |
| 152 | SOFA TWO SEATER (TP).M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as existing and directed. |
| 153 | M&L for replacement of existing foam cushion forback of sofa two seater.The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/-per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well |
| 154 | M&L for replacement of existing foam cushion for seat of sofa two seater.The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/-per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well |
| 155 | S&F Back leg (Teak Wood)/Hard wood left/right all as per existing and as directed by Engr-in-Charge. |
| 156 | S&F Front leg (Teak Wood)/Hard wood left/right all asper existing and as directed by Engr-in-Charge. |
| 157 | S&F of top rails made of teak wood/Hard wood |
| 158 | S&F of rails of stiffners made of teak wood/Hard wood |
| 159 | S&F of rails of rear legs made of teak wood/Hrad wood |
| 160 | M&L for polishing of two seater Sofawith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 161 | SOFA SET 4 SEATER (2+1+1)TP.M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame all as existing and directed. |
| 162 | M&L for replacement of existing foam cushion forback of sofa set (4 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth , shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well (In one Set =04 Nos Back cushion) |
| 163 | M&L for replacement of existing foam cushion for seat of sofa set (4 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth , shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The backcushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:-(In one Set =04 Nos Seat cushion) |
| 164 | M&L for repair and replacement of wooden long rail of sofa set with new M.P.Teak Wood/Hard wood long rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed. |
| 165 | M&L for repair and replacement of wooden short rail of sofa set with new M.P.Teak Wood/Hard wood short rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed. |
| 166 | M&L for polishing of four seater Sofawith one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer -in-Charge |
| 167 | SHELVES WITH GLASS 900*1200*225mm |
| 168 | Removal of old u/s side (or) top (or) Bottom wall of shelves and S&F new wall madeof 19mm thickcommercialboard with 1mm thick lamination as exists |
| 169 | Removal of old u/s back of shelves with glass and S&F new back made of 6mm thickcommercialply wood as exists |
| 170 | M&L for removing old u/s broken glass form shelves with Glass and S&F new 4mm plain glass as exists and as directed. |
| 171 | DRESSING MIRROR |
| 172 | M&L for removal of old u/s teak wood frame from Dressing Mirror and S&F new frame made of teak wood 620X850mm |
| 173 | M&L for removal of old u/s broken looking mirror from Dressing Mirror and S&F new looking Mirror 4mmthick as exists and as directed |
| 174 | Polishing of dressing Mirror old surface with one coatnew suface with two coats of sprit polish. |
| 175 | CBA STEEL CHAIR WITH WRITING PAD |
| 176 | M&L for removing old u/s rexene from seat and back of chair CBA steel and S&F new rexene(colour and quality as approved by GE) as exists and directed |
| 177 | M&L for removing old u/s polyurethene cushion and S&F new polyurethene cushion of 50mm 40 density |
| 178 | M&L for removing old u/s writng pad from chair CBA steel and S&F new writing pad made of 19mm commercial board with 1mm lamination as exists and as directed |
