|
| 1 | Dismantling wrought iron or mild steel work as in fencing gates or any description not otherwise provided complete all as specified and as directed |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and as directed |
| 3 | Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, all as specified and as directed |
| 4 | Supply and fix mild steel posts and struts for fencing angles, flats etc. including cutting tops to shape, welding as directed, drilling holes, notching for wire, etc. flat iron fillets and bars (for securing fencing mesh etc.) and mild steel screw bolts including washers and hexagonal or square nuts etc. as reqired at site including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, all as specified and as directed. |
| 5 | `-Ditto- all as per item No 04 above but fabrication and fixing only (except material) Note: Serviceable material obtained from item No 1 shall be used |
| 6 | Material and labour for Mild Steel Framed work as in gates, framed guard bars, barred iron doors, ladders of angle or other section with gusset plates, rails, braces, etc. framed and hung as gates, including heavy duty gate hinges, stops, hand-made sliding bolts, etc. steel sheeting or other covering etc. conforming to Fe-290 Gde E-165 complete, all as specified and as directed. |
| 7 | Material and labour for PCC 1:2:4 type B1 /type B-0 as in flooring, steps, plinth courses, string courses, copings, coving,kneelers, apex stones, bed plates, kerbs, hunching, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed. |
| 8 | Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel (anti corrosive)paint over a coat of epoxy primer complete all as specified and directed. |
| 9 | Material and labour for preparation of new steel surfaces n exc 10 cm width or girth when unconnected with other painting or when applying two coat of synthetic enamel (anti corrosive)paint over a coat of anti-corrosive primer complete all as specified and directed. |
| 10 | Dismantling old chain link fencing wire mesh, any type from existing fencing posts complete all as specified and as directed. |
| 11 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, including of binding wire etc. and fixing to fencing post with nut bolts, flat iron rails, straining bolts, etc. Note: Flat iron, \"U\" bolts and MS nut bolts shall be measured and paid separately. |
| 12 | Supply only 3.50 to 4mm dia core wire UV-Resistant Virgin Grade PVC coated chain link fence manufactured from high-quality heavy galvanized steel wire 260 gsm, confirm to IS : 280 & IS : 4826 for mass of heavy Zinc coating extruded with Polyvinyl Chloride Non Recycled confirming to IS: 2721 – 2003 . Chain Link Fence will be having mesh size of 40mmx 40mm / 50mmx50mm, Tensile Strength 400 - 550 Mpa ., complete all as specified and directed. Note: Weight of chain link fencing inclusive of PVC coating shall be found out by a Board of Officers. Make: A1 Fence, Shiva Engineering Co, Global Technocrats Pvt Ltd |
| 13 | Complete removal of existing treatment with mechanical grinder and wire brushes and material and labour for preparation of old painted steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel (anti corrosive)paint over a coat of epoxy primer complete all as specified and as directed. |
