|
| 1 | Part -I Surfacing works on road Ajnala Bypass Km 3.200 to Km 5.075 |
| 2 | Providing and laying of Wet Mix Macadam 7.50 cm thick compacted as per MORT&H specifications all as specified. |
| 3 | Providing and applying Prime Coat as per MORT&H specifications all as specified. |
| 4 | Providing and applying tack coat as per MORT&H specifications all as specified. |
| 5 | Providing and laying of Dense Bituminous Macadam 7.50 cm thick compacted with HMP using crushed aggregates of specified grading, premixed with Bituminous binder VG 30 @ 4.5 % (Min) by weight of total mix all as specified. |
| 6 | Providing and laying Bituminous Concrete layer 4.00 cm thick (Compacted) with HMP using crushed aggregates of specified grading, mixed with Bituminous binder VG-30 Grade @ 5.4% (Min) by weight of total mix all as specified |
| 7 | Providing and laying of Road marking with hot applied thermoplastic compound with reflecting glass beads as per MORT&H specifications all as specified. |
| 8 | Part - II. Surfacing works for Upgradation of DCBs under AOR of 7 Inf Div |
| 9 | Providing and laying of Wet Mix Macadam 7.50 cm thick compacted as per MORT&H specifications all as specified. |
| 10 | Providing and applying Prime Coat as per MORT&H specifications all as specified. |
| 11 | Providing and applying tack coat as per MORT&H specifications all as specified. |
| 12 | Providing and laying of Dense Bituminous Macadam 5.0 cm thick compacted with HMP using crushed aggregates of specified grading, premixed with Bituminous binder VG 30 @ 4.5 % (Min) by weight of total mix all as specified. |
| 13 | Providing and laying Bituminous Concrete layer 3.00 cm thick (Compacted) with HMP using crushed aggregates of specified grading, mixed with Bituminous binder VG-30 Grade @ 5.4% (Min) by weight of total mix all as specified |
| 14 | Part - III. Re-surfacing works on Internal Roads of 141 DMC |
| 15 | Providing and applying tack coat as per MORT&H specifications all as specified. |
| 16 | Providing and laying of Dense Bituminous Macadam 5.0 cm thick compacted with HMP using crushed aggregates of specified grading, premixed with Bituminous binder VG 30 @ 4.5 % (Min) by weight of total mix all as specified. |
| 17 | Providing and laying Bituminous Concrete layer 3.00 cm thick (Compacted) with HMP using crushed aggregates of specified grading, mixed with Bituminous binder VG-30 Grade @ 5.4% (Min) by weight of total mix all as specified |
| 18 | Execution of berm filing / dressing 3.0 cm thick compacted in 1.50 mtr width on either side of road with selected moorum to match the resurfaced level of road duly compacted. All as specified in special conditions and particular specifications. |
| 19 | Execution of road marking of edge lines & centre line with Hot applied thermoplastic paint (2.5 mm thick) conforming to clause 803.4 of MoRT&H specifications for road and bridge works including preparation of surface and application. |
| 20 | Providing and fixing of road stud 100 x 100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30mm upto a depth of 60mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973. |
