|
| 1 | Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed |
| 2 | All as per item No 1 here-in-before but area exc 1.50 Sqm but n-exc 4.0 Sqm each |
| 3 | Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each |
| 4 | Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed |
| 5 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 125x60mm (suitable for both side shutter) made out of 1.25mm mild steel sheets complete all as specified and directed |
| 6 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed |
| 7 | Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) in lintels upto 1.5m clear span, cills, steps, coppings, appex stones, bed plates, kerb stone, filling in pressed door chowkat/hold fast blocks including weathering slightly rounded and chemfered angles and throating, complete all as specified and directed |
| 8 | Supply and fixing plain framed panelled shutter 35mm thick of 2nd class hardtwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsist ,complete all as specified |
| 9 | S&F, Glazed and skeleton shutters of 2nd class hard wood, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 10 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 11 | Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed by Engr-in-charge. |
| 12 | Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed by Engr-in-charge. |
| 13 | Supply and fixing for aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed by Engr-in-charge. |
| 14 | Supply and fixing for 150mm long aluminium handles cast type anodized complete all as specified and directed by Engr-in-charge. |
| 15 | Supply and fixing for 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed by Engr-in-charge. |
| 16 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame |
| 17 | Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed. |
| 18 | Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 19 | Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. |
| 20 | M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and includinga coat of pink primer (by spraying) all as specified & directed |
| 21 | Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new or previously untreated steel surface incl preparation of surface over 10cm widthor girth complete all as specified and directed by Engr-in-charge. |
| 22 | S&F in repairfor 1600x500mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood with and including fixed to powder coated aluminium frame of approved section with chromium plated brass screws and cup washers complete all as specified & directed. |
| 23 | S&F anodised aluminium door shutters, with and including anodised aluminium frame with one or more rebates, both with aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as aluminium handle 2 No\"s in each door, hinges,and including 5 to 6 mm thick glass (black) and aluminium grill fixed to frame completeallasspecified & directed. |
| 24 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 25 | All as per item No 24 here-in-before but without glazing bars |
| 26 | Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm |
| 27 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 28 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 29 | Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 30 | S&F in repair grating 100/125 mm dia of, steel chromium plated with or without hole as required complete all as specified and directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 32 | M&L for non skidcoloured Ceramic tiles,first quality( of approved class , colourand design/ shade )7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm,,as in floorsurfaceetc set and jointed in neatcement slurry and pointed in coloured cement to match with shade ofcoloured tiles over and including 15 mm thickscreed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 33 | M&L for glazed coloured ceramic tiles,first quality ( of approved class , colourand design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of colouredtiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 34 | M&L forvitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade, double charged ), 8 to 10 mm thick (Square/ rectangular),polished, area of each tilesnot exceeding 0.36 sqm,,as in floorsurfaceetc set and jointed in neatcement slurry and pointed in coloured cement to match with shade ofcoloured tiles over and including 15 mm thickscreed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 35 | M&L forvitrefied coloured Ceramic tiles,first quality( of approved class ,dark Shade), 10 mm thick (Square/ rectangular),polished, area of each tilesnot exceeding 0.36 sqm,,(cutin required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of colouredtiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 36 | S&F in repairs vitreous china squatting pan \" Orissa pattern\" size 580 x 440 mm, white withintegral foot rest (excluding flushing cistern and flush pipe) with cast iron \" P \" trap and including connecting totrap and flushing pipe, anti syphonage pipe etc complete & including making good to floor complete all as specified and directed. |
| 37 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern but including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge.Make : Parry ware/Hind ware/CERA |
| 38 | S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge.Make : Hindware/Paryyware /Prayag /Polytuff |
| 40 | Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 41 | Description all as per item No 40.00 here-in-before but for 20 mm bore pipe |
| 42 | Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed by Engineer-in-Charge.Make : JINDAL/PRAKASH/TATA |
| 43 | Description all as per item No 42.00 here-in-before but for 20 mm dia |
| 44 | Refixing only 15 mm bore tubes, any grade, to walls and ceilings or laying in floors |
| 45 | Description all as per item No 44.00 here-in-before but for 20 mm dia |
| 46 | S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed. |
| 47 | S&F in repair transparent 6.30mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc. |
| 48 | S&F in repair PTMT shelf, of size 300 x 120mm, 5-6 mm thick complete fixed with bracings/brackets and screws etc. |
| 49 | S&F in repair health fauset ABS body, fancy type with wall hook and one meter stainless steel braided rubber hose pipe suitable and screwed for 15 mm bore GI pipe including necessary fixing arrangement as per manufactures instructions complete all as specified and directed. |
| 50 | S&F in repairbib tap standard 15 mm bore high presure of PTMT, any colour, screwed, for iron pipe and fixed (minimum weight not less than 90 grams)complete all as specified and directed. |
| 51 | S&F in repairsbib taps, cast copper alloy , fancy type, chromium plated, long bodywith crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 52 | S&F in repairs pillar taps, cast copper alloy, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 53 | S&F in repairangular stop cockwith wall flange, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed both ends for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 54 | Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Make : Symet/ Prayag |
| 55 | M&L for machine cut kota stone slab as in flooring 18-20mm thickand jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishingwith and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 56 | M&L forgranite stone black machine cut 18 to 20 mm thickfixed on any surface ie steps, jambs, pillarwindow cills, cooking platform, wall cladding and the like etc setin cement mortar 1:4 and pointed with white cement (1:2) using marble dust and admixture of pigment to match with shade of stoneincluding grinding, rubbing and polishing mirror finish and half rounding of the exposed faces of stone , with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 57 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor complete all as specified and directed. |
| 58 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 60 | S&F in repair PVC (SWR) branch piece,75 mm bore, single (single Y) equal or unequaland jointed with approved adhesive complete all as specified & directed. |
| 61 | S&F in repair PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 62 | S&F in repair PVC (SWR) branch piece,110 mm bore, single (single Y) equal or unequaland jointed with approved adhesive complete all as specified & directed. |
| 63 | Supply & fix in repairPVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed. |
| 64 | S&F in repairvitreous china wash hand basin (flat back) of size 580x450mm excluding taps, waste,chain and plug and porcelain stopper but including one number waste fittings, 32 mm dia, brass, chromium platedwith long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe 610 mm long with connector,with and including MS brackets and cutting for and pinning in ends of brackets completeall as specified and directed. |
| 65 | Supply and fixedin repair vitreous china urinal, Half stall type,white including grating and union for discharge pipe,waste pipe andchromium plated spreader 15mm bore fixed to water supply pipe including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement specified and directed. |
| 66 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed. |
| 67 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even, as in wall, complete all as specified and directed. |
| 68 | Material and labour for rendering 15 mm thick using ready mix plaster bags on brick work or concrete surfaces, finished surface even and smooth as in wall complete all as specified and directed. |
| 69 | M&L for preparing new plastered or un-plastered surfaces of walls & applying ofwall putty 1.5 to 2mm thick on existingprepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base course as per manufacturer\"s instructionswith using roller complete all as specified and directed. |
| 70 | M&L for preparing new plastered or un-plastered surfaces of walls & applying ofwall putty 1.5 to 2mm thick on existingprepared surface for smooth finishing and applyingtwo coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base course as per manufacturer\"s instructions with using roller complete all as specified and directed. |
| 71 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 72 | M&L Brick work with sub class \"B\" bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed |
| 73 | M&L for brick work (except bricks), old size straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.NOTE:- Old bricks retrived under item No. 72 here in above shall be reused. |
| 74 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 75 | Disconnecting & taking down existing water tank any type annd S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical verticalwith closed top) with and including ball brass valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipeor for brass ferrule, hoisted and fixed in positionall as specified in SSR Part I 2009complete all as specified & directed. |
| 76 | S&F in repair PTMT ballvalveshigh pressure with polythene float and fly nut complete screwed for iron pipe 20 mm diaor for brass ferrule complete all as specified and directed. |
| 77 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and M&L for writting the cleanning date with white colour synthetic enamel paint with tensil cutting as aproved, capacity of tank upto 500 Ltrs each, complete all as specified and directed. |
| 78 | All as per item No 77 here-in-before butcapacity of tank exc 500, n. exc 1000 Ltrs each. |
| 79 | S&F in repair, GI sheet lid covers with spikes and having screw fixing system to the water tanks of any capacity including making neccesary fittings/fixtures arrangements including removal of old lid and fixing new one complete all as pecified and directed. |
| 80 | Complete removal of existing treatment on wall/ roof projections including chajja, facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 81 | M&L for applying 1.5 mm to 2 mm thick exterior grade wall care putty (JK/BIRLA) making smooth surface complete all as specified and directed. |
| 82 | Preparation of plastered/unplastered wall surfaces and applying two coats of premium acrylic emulsion paint exterior weather coat, complete all as specified and directed. |
