|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:(a) All kinds of soil |
| 2 | Providing and laying water proofing treatment on horizontal and vertical surface of all depth below ground level for under ground structural etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 3 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressureincluding cutting of nipples after curing etc. complete as per directions of Engineer-in Charge.(The payment shall be made on the basis of actual weight of approved grout injected.)(a) Epoxy injection grout in concrete/RCC work of approved make |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :(a)1 : 1 . 5 . 3 (1 cement : 1 . 5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :(a)Cement mortar 1 : 6 (1 cement: 6 coarse sand) |
| 6 | Providing and fixing 1 8 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 : 4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.(a) Granite stone slab of colour black, Cherry/Ruby red(i) Area of slab over 0.50 sqm |
| 7 | Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1 : 2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).(a)Stainless steel cramps |
| 8 | 12 mm cement plaster of mix :(a) 1:6 (1 cement: 6 fine sand) |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour(a)Old work (one or more coats) |
| 11 | Supply, installation, commissioning & testing of lift (Ground + 1st floor + 2nd floor + 3rd Floor) for 8 Passenger with followng:-Technical Specifications:Assembled Product : Passenger Elevator, Capacity : 8 Persons, 544Kg, Speed : 1.00 m/s, Stops & Opening : 4 Stops, 4 Openings, Floor designations : G,1,2,3, Machine type & Location : meta 200 MRL - Gearless machine located in the shaft on top of the guiderails, Control : Duplex collective selective control, Drive : ACVVVFPower supply : 415 volts (+10 / -15%), 3 phase, 50 Hz (+/-5%), AC, Hoist way dimensions : 1800mm wide x 1700mm deep, Car travel : 13800mm, Overhead : 4600mm, Pit depth : 1600mm, Car dimensions : 1100mm wide x 1300mm deep x 2200mm high, Door opening : 800mm wide x 2000mm high, Car door : 2 panel automatic centre opening door with ACVF drive in Stainless Steel Silver Sky finish, Landing door (Group1) : 2 panel automatic centre opening door in Stainless Steel Silver Sky finish on 4 floors, Landing door (Group2) : 2 panel automatic centre opening door in Stainless Steel Silver Sky finish on 0 floors, Car design : Trendy, Car flooring : 20mm recess provided for granite / marble flooring, Natural mirror in car : Natural mirror of half car height and full car width provided on rear wall of car, Handrail : Round handrail in Stainless steel finish provided on rear wall of car, Landing operating panel : Individual landing operating panel for each elevatorCarefinish : Rear mid panel = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304),Rear Corner = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Side Mid Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Side Corner Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Front Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304)Features included:ACVVVF closed loop drive, alarm button in car operating panel with battery back-up, automatic operation for car fan, adjustable door open time, anti-nuisance (empty car), anti-nuisance (car call cancellation at direction reversal), blower fan in car for ventilation, braille on push button, car call cancellation by double pressing floor button in car operation panel, door open and door close button in car operating panel, door closing retries, door nudging, emergency light, full load by-pass, home landing, infra-red screen for car door, intercom, jammed landing operating panel call button by-pass, motor overheat protection, overload function with audio-visual indication in car operating panel, phase failure and phase reversal protection, automatic rescue device in case of power failure, attendant control, car arrival chime on car top, fireman control, fireman emergency return, interface to building monitoring system (BMS) through potential free contracts, voice announcement unit in English language in car, RCC socle for car and counter weight buffers. |
| 12 | Supply, installation, commissioning & testing of lift (Ground + 1st floor + 2nd floor) for 8 Passenger with followng:-Technical Specifications:Assembled Product : Passenger Elevator, Capacity : 8 Persons, 544Kg, Speed : 1.00 m/s, Stops & Opening : 3 Stops, 3 Openings, Floor designations : G,1,2, Machine type & Location : meta 200 MRL - Gearless machine located in the shaft on top of the guiderails, Control : Duplex collective selective control, Drive : ACVVVFPower supply : 415 volts (+10 / -15%), 3 phase, 50 Hz (+/-5%), AC, Hoist way dimensions : 1800mm wide x 1700mm deep, Car travel : 9200mm, Overhead : 4600mm, Pit depth : 1600mm, Car dimensions : 1100mm wide x 1300mm deep x 2200mm high, Door opening : 800mm wide x 2000mm high, Car door : 2 panel automatic centre opening door with ACVF drive in Stainless Steel Silver Sky finish, Landing door (Group1) : 2 panel automatic centre opening door in Stainless Steel Silver Sky finish on 3 floors, Landing door (Group2) : 2 panel automatic centre opening door in Stainless Steel Silver Sky finish on 0 floors, Car design : Trendy, Car flooring : 20mm recess provided for granite / marble flooring, Natural mirror in car : Natural mirror of half car height and full car width provided on rear wall of car, Handrail : Round handrail in Stainless steel finish provided on rear wall of car, Landing operating panel : Individual landing operating panel for each elevatorCarefinish : Rear mid panel = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304),Rear Corner = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Side Mid Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Side Corner Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304), Front Panels = Stainless Steel Honeycomb (Scratch Resistant) Finish (Thickness -1.2 mm, Grade = SS#304)Features included:ACVVVF closed loop drive, alarm button in car operating panel with battery back-up, automatic operation for car fan, adjustable door open time, anti-nuisance (empty car), anti-nuisance (car call cancellation at direction reversal), blower fan in car for ventilation, braille on push button, car call cancellation by double pressing floor button in car operation panel, door open and door close button in car operating panel, door closing retries, door nudging, emergency light, full load by-pass, home landing, infra-red screen for car door, intercom, jammed landing operating panel call button by-pass, motor overheat protection, overload function with audio-visual indication in car operating panel, phase failure and phase reversal protection, automatic rescue device in case of power failure, attendant control, car arrival chime on car top, fireman control, fireman emergency return, interface to building monitoring system (BMS) through potential free contracts, voice announcement unit in English language in car, RCC socle for car and counter weight buffers. |
| 13 | Removing / Dismanteling of 08 pesssanger liftmake - OTIS with accessories etc all complete all as per direction of Engineer-in-charge |
| 14 | Credit of 08 passenger liftmake - OTIS with accessories etc all completeas per direction of Engineer-in-charge |
| 15 | Note :a) The bidders are required to quote their rates Plus (+) or Minus (-) in Percentage over totalamount .Tenderer shall qoute the rates percentageby selecting the option excess (+) or less (-) to quote the percentage above / below the total amount |
