|
| 1 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.3x4 sq.mm |
| 3 | Finding and detecting location of undergound LT cable with FLC machine including excavation pin pointing, Fault refilling after repair of ground at marked fault as required at site. |
| 4 | Making provision of digging out the fault location upto 10 mtr for making straight through joint by tracing out the loop and then refilling the trench after restoration the electric supply etc. as required. |
| 5 | P/f installation, testing and commissioning of following MCCB AC supply complete with connection in the suitable enclosure etc. as required at site. |
| 6 | 400 amps MCCB 3 Pole 35 KA |
| 7 | 100 amps MCCB 3 Pole 35 KA |
| 8 | Supplying/ fixing/ layingof one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size including excavation, sand cushioning, protective covering and refilling the same etc. as required at site. |
| 9 | 4x16 sq.mm |
| 10 | 3½ X 95 sq. mm |
| 11 | Providing and fixing of angle frame with steel work welded in Built up sections/ framed work, including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer of suitable size (0.60x 0.60x 0.60) including excavation and repairing the same etc. as required at stie. |
| 12 | S/I/T/C of 200 watts flood light fitting 5700K pressured dia cast housing with IP65 protection efficient with 220-240V output emitter LED for better distribution with dimension 447x163x327 mm and 6500 colour with lumens 21500 with all accessories etc. as required at site. (Model No. BVP410 LED 150CW HE NB FG S4 XTFCL) (Philips) site |
| 13 | Servicing/ cleaning / meggering / checking of load balancing/ checking with ton tester of existing double door feederi/c removing the dust and carbonized and dress up the hanging wire along with thimble if necessary including painting and welding etc. as required. at site. |
| 14 | Making provision of gas welding of existing pole with P/F 4\" reducer and painting of pole with 2 or more coat etc. as required at site. |
| 15 | S/F LED 72 watts street light fitting luminaire with pressure dia cast aluminium and heat resistance toughened flat glass complete with accessories top opening compartment with IP66 protection with 7200 lumens 220-240v i/c making connections etc. as required. (model No. BRP409 LED CW 074 CW HE MR S1 PSU GR) (Philips) |
| 16 | Supplying and fixing of street light pole box 8\"x10\" complete with all accessories i/c suitable clamps, suitable bakelite sheet, brass screws, washers and 1 Nos. SP MCB 10 amps capacity i/c making connection etc. as required at site. |
| 17 | Supplying and fixing of 63 amps DP MCB 240 volts in the existing MCB DB complete with connection etc. as required at site. |
| 18 | Making temporary arrangement for the Hiring chable of suitable size 3.5 x120 sqmm for restoring the power supply and making connection etc. as required |
| 19 | Supplying and fixing of G.I. bracket 40 mm for the street light fitting etc. as required at site. |
