Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 2 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 3 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 4 | Cement Concrete 1:4:8 (One Cement, Four Sand and Eight hard broken stone aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specificationIncluding cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columnsIncluding cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars From Item No.7 RCC 1 : 1½ :3Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 7 | Reinforced Cement Concrete 1:1½:3 (One Cement, One and a half sand and Three hard broken stone aggregate) using 20 mm gauge hard broken granite stone aggreagate for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper & Blocks laid over it without claiming extra, etc., complete complying with standard specification. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 8 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Cement mortar 1:6 (1 cement : 6 coarse sand) Coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all liftIncluding cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and strutsIncluding cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars From Item No.12 RCC 1 : 1½ : 3Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 13 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 15 | Cement concrete flooring 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 16 | Plastering with cement mortar 1:3 (1 cement : 3 coarse sand) on brick/stone masonry or concrete surfaces, including surface preparation, raking of joints, cleaning and wetting, applying plaster to the specified thickness, finishing smooth and even, curing complete, including cost of materials, labour, scaffolding and all incidental charges,and directions of the Engineer-in-Charge. |
| 17 | Special ceiling plastering and finishing all the RCC exposed surfaces such as RCC Slabs sunshade, canopy, staircase steps, landing slab etc., with cement mortar 1:3 [One cement and three M-sand] 10mm thick including hacking the surface and providing cement mortar noising beading wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specifications.Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 18 | Painting two coats of newly plastered ceiling surface with White washing with lime to give an even shade Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 21 | Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: |
| 22 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) and finished neat complete. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 23 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 24 | Provision for plumbing work with necessary fittings, including supply, installation, testing and commissioning of complete plumbing system, inclusive of cost of materials, labour charges, conveyance, tools & plants, scaffolding, cutting and making good, testing and all incidental charges, complete, as per specifications and directions of the Engineer-in-Charge.All fixtures and fittings shall be of approved make and quality, conforming to relevant IS codes and CPWD specifications. The plumbing system shall be tested for leakage and proper functioning before handing over. The rate shall be inclusive of all taxes, duties, labour charges, conveyance, leads and lifts, complete.The item shall include the following materials with required quantities: Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections,15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting (As per DSR 2023 Vol 2 Pg.No.253 Code.No.17.68) [EACH] |
| 25 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 26 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 27 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 28 | Supplying and fixing of 1000 litres capacity PVC water tank with IS specification IS 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and etc. (The water tank should be got approved by the engineer incharge before use on work) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 29 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 30 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 31 | Supplying and erecting in position of 500 liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch- 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works ,wherever necessary to install the System in position and intact. |
| 32 | Provision for purchase, supply, installation, testing and commissioning of electrical and electronic items, including supply of electrical fittings, wiring, fixtures and accessories, inclusive of cost of materials, labour charges, conveyance, tools & plants, cutting and making good, testing and all incidental charges, complete, as per CPWD (E&M) specifications, relevant IS codes and directions of the Engineer-in-Charge.The item shall include the following electrical materials with quantities and lengths:All electrical materials shall be of approved make and quality, conforming to CPWD DSR (E&M) provisions and relevant IS standards. The entire installation shall be tested for insulation resistance, polarity, earth continuity and proper functioning before handing over.The rate shall be inclusive of all taxes, duties, labour charges, conveyance, leads and lifts, complete. Wiring with 2x1.5sq.mm.PVC insulated unsheathed FRL SSC copper conducto rof 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5AFT switch inflush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 33 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm Metal switch box with suitable top cover for 5 A 3 pin non inter locking CS Modular Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 34 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour -Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 35 | Wiring with 2x4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade insuitable pipe concelaed with PVC accessories with 150mm x100mmx113mm TW switch box for 15A 3pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 36 | Supply and fixing of fancy glass shade and 11W CFL for BH point. |
| 37 | Supply and fixing of single box type 4\"36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 38 | Supply and fixing of 1 x 45w 4U Retro CFL B22 type street light fitting complete with 19mm dia GI pipe (class “B”) on the existing post / wall with PVC unsheathed copper leads MS clamps and aluminium painting with CFL (CG / Philips or Equivalent) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 39 | Supply and fixing of 4\" 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension, with PVC unsheathed Copper leads from the terminals to the fittings with flu. tubes Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 40 | Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch. Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 41 | Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall with earth connection (For Computer Plug Socket)Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 42 | Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] (SD-140) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 43 | Supply and fixing of 63A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only.Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB\"s should be with ISI mark (Like Standard make). Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 44 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB\"s should be with ISI mark (Like Standard make). Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 45 | Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB\"s should be with the ISI mark (like standard make) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 46 | Supply and laying of 31/2 X 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 47 | Supply and clamping of 31/2x50 mm PVC ctvg ARMOURED CABLE ON SUITABLE on post or on wall with MS Clamps Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 48 | Supply and fixing of 2x36w CFL type street light fitting with complete with 32mm dia G.I. pipe class \"B with 1 No 32mm G.I. Bend complete on the existing post / well with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads, MS clamps and aluminium paiting with 2 Nos 36w CFL. (Make CG SCE 13236EB / equivalent) Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 49 | Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry Including cost of all materials, conveyance, loading and unloading, labour, hire charges, fuel, tools and plant, all applicable taxes, and incidental charges, complete as directed by the Engineer-in-Charge |
| 50 | Provision for providing Baby Care Room facilities, including supply, installation, fixing, testing and commissioning of all required furniture, electrical and comfort amenities, complete in all respects, as per approved specifications and directions of the Engineer-in-Charge. The item includes cost of materials, furniture, fittings, electrical accessories, labour charges, conveyance, handling, installation, testing and all incidental charges, etc., complete.The scope of work shall include, but not be limited to, the following items:All materials and fittings shall be of approved make and quality, safe for infants and suitable for indoor use. Electrical works shall conform to relevant IS codes and CPWD (E&M) specifications. The complete Baby Care Room shall be tested for proper functioning and safety before handing over.The rate shall be inclusive of all taxes, duties, labour charges, conveyance, leads and lifts, complete. Providing and placing nursing chair for baby care room, made of sturdy wooden / powder-coated MS frame with comfortable cushioned seat and backrest, upholstered with washable, durable fabric / synthetic leather of approved quality. The chair shall be provided with arm rests, proper back support, stable legs, and smooth finished edges, ensuring comfort and safety for nursing mothers. The item shall be suitable for indoor public use and complete in all respects, as directed by the Engineer-in-Charge. |
| 51 | Providing and placing pedestal fan of 400 mm sweep (16 inch), of approved make, suitable for indoor use in baby care room. The fan shall have adjustable height, oscillating mechanism, and multiple speed control, with sturdy base for stable operation. It shall be fitted with protective guard, energy-efficient motor, and operate on single-phase 230 V AC supply, complete with power cord, plug top, testing and commissioning, as directed by the Engineer-in-Charge. |
| 52 | Providing, supplying, installing, testing and commissioning of 1 Ton Split Air Conditioner of approved make such as Voltas / Lloyd / Blue Star / Carrier or equivalent, complete with indoor and outdoor units, copper refrigerant piping with insulation, drain piping, electrical interconnections, suitable wall mounting brackets / stands, vibration pads, and all accessories, conforming to relevant BIS/ISI standards, including one year comprehensive warranty and five years warranty on compressor, complete as per manufacturer’s specifications, site requirements and direction of Engineer-in-Charge. |
| 53 | Providing and placing baby cradle suitable for infant care room, made of good quality seasoned wood / powder-coated mild steel / high-grade plastic (as specified) with smooth finished edges, sturdy frame and stable base, complete with comfortable washable mattress, side safety rails, gentle rocking mechanism or fixed type, and mosquito net arrangement, ensuring complete safety and comfort for infants. The cradle shall be easy to clean, non-toxic, child-safe, durable, and suitable for use in public facilities, complete in all respects and as directed by the Engineer-in-Charge. |
| 54 | Providing and placing a compact utility table for baby care room, made of engineered wood / pre-laminated particle board / MDF of approved quality, with smooth laminated finish, rounded edges for safety, and sturdy support with wooden or powder-coated MS legs. The table shall be suitable for placing baby care items, easy to clean, stable, and safe for indoor use, complete in all respects and as directed by the Engineer-in-Charge. |
| 55 | Providing and fixing wall scenery in baby care room, consisting of child-friendly themed wall artwork / vinyl wall stickers / decorative wall decals / mural painting, depicting pleasant and soothing designs such as nature, animals, cartoons or educational themes, made of non-toxic, eco-friendly and washable materials, suitable for indoor use. The work shall include surface cleaning, proper fixing/alignment, and finishing complete, as approved by the Engineer-in-Charge. |
| 56 | Providing and fixing blackout curtain of 7 ft height, made of good quality heavy-duty blackout fabric with minimum 90–100% light blocking capacity, suitable for baby care room / indoor use. The curtain shall be of approved colour and design, with stitched edges, rust-proof eyelets / hooks, complete with curtain rod or track (if specified), including all fittings, fixing accessories, and proper installation, complete as per site requirement and direction of the Engineer-in-Charge. |
| 57 | Providing and placing 7 litre capacity dust bin with pedal operation, made of good quality durable plastic / stainless steel (as specified), fitted with foot-operated pedal mechanism for hands-free use and tight-fitting lid to control odour and maintain hygiene. The dust bin shall be easy to clean, rust-free, sturdy and suitable for indoor use, complete in all respects and as directed by the Engineer-in-Charge. |
| 58 | Providing and fixing ceiling-mounted LED light fixture of size approximately 300 mm dia (round) / 300 × 300 mm (square), with 12 Watt LED lamp, suitable for indoor use in baby care room, providing soft and uniform illumination. The luminaire shall be surface-mounted / flush-mounted, glare-free, energy efficient, with durable housing and opal diffuser, complete with all mounting accessories, internal wiring connection, testing and commissioning, complete as per direction of Engineer-in-Charge. |
| 59 | Providing and placing diaper disposal bin for baby care room, made of good quality durable plastic, with tight-fitting lid and odour-control design, suitable for hygienic disposal of used diapers. The bin shall be easy to operate (manual / pedal type), easy to clean, compact in size, stable, and suitable for indoor use in public facilities, complete in all respects and as directed by the Engineer-in-Charge. |
| 60 | Providing and fixing wall clock of approved quality, round/square in shape, made of durable plastic body with clear dial, bold numerals and glass/acrylic cover, suitable for indoor use. The clock shall be battery-operated quartz movement, preferably silent sweep type, accurate in timekeeping, easy to read from a distance, complete with battery and all fixing accessories, and fixed at appropriate height, as directed by the Engineer-in-Charge. |
| 61 | Providing and fixing wall-mounted mirror of size 450 mm × 600 mm, made of good quality float glass mirror of minimum 5 mm thickness, with smooth polished edges and protective backing, fixed to the wall with suitable non-rusting clamps / concealed fittings / adhesive. The mirror shall be safe, durable, easy to clean, and suitable for indoor use in a baby care room, complete in all respects and as directed by the Engineer-in-Charge. |
| 62 | Providing and fixing diaper / sanitary napkin vending machine of minimum capacity 20 numbers, wall-mounted type, made of powder-coated mild steel / durable ABS plastic body, suitable for baby care room or public facility. The machine shall be manual / coin-operated (as specified), hygienic in operation, easy to refill and maintain, complete with all fixing accessories, testing and commissioning, as directed by the Engineer-in-Charge. |
| 63 | Providing and placing one number child-friendly toy for baby care room, made of non-toxic, child-safe plastic / soft material, suitable for toddlers and infants. The toy shall have smooth rounded edges, bright and pleasant colours, be washable and durable, and free from sharp parts or choking hazards. The item shall be suitable for indoor public use and complete in all respects, as approved by the Engineer-in-Charge. |
| 64 | Providing and fixing one number First Aid Box for baby care room, made of durable plastic / metal body, wall-mounted or portable type, with clearly marked first aid symbol and secure lid. The box shall be adequately stocked with basic first aid items suitable for infants and adults, such as sterile cotton, gauze pads, bandages, adhesive plasters, antiseptic solution/ointment, disposable gloves, scissors, thermometer, and other essential contents. The first aid box shall be easy to access, hygienic, refillable, and complete in all respects, as directed by the Engineer-in-Charge. |
| 65 | Providing and fixing UPVC (Unplasticized Polyvinyl Chloride) casement type openable windows of size 0.60 m × 0.90 m (0.54 Sqm each), made from multi-chambered UPVC profiles having minimum 2 mm wall thickness, with outer frame size 60 mm × 58 mm and shutter profiles reinforced with 1 mm thick GI reinforcement (minimum 125 GSM zinc coating), fully corrosion-free, complete. The windows shall be provided with EPDM rubber gaskets (black colour) all around the frame and shutter, Espag multi-point locking system with handle operation, key-lockable security hinges and strong locking arrangement to reduce noise and energy loss. Corners and joints shall be fusion welded, cleaned and finished properly. Glazing shall be 4 mm thick radiation-free pin-headed plain or brown coloured glass, securely fixed to the shutter and watertight even during heavy rains and storm conditions. The window shall be fixed to the wall opening with proper alignment, 100% packing, screws and silicone sealant all around the frame, ensuring smooth operation of the sash. All materials shall be of approved make and the window shall be got approved by theEngineer in charge before use on work, complete in all respects including cost of materials, labour, fittings, conveyance and installation, |
| 66 | Providing and fixing UPVC (Unplasticized Polyvinyl Chloride) louvered ventilators of approved make and quality, manufactured from multi-chambered UPVC profiles having minimum wall thickness of 2 mm, with outer frame size 60 mm × 58 mm and shutter profile size 60 mm × 78 mm, both profiles reinforced with 1 mm thick GI reinforcement with minimum 125 GSM zinc coating, fully corrosion-free. The ventilators shall be provided with EPDM rubber gaskets (black colour) all around the frame and shutter edges. The corners and joints of the profiles shall be fusion welded, properly cleaned and finished. The louvers shall be fitted with 4 mm thick radiation-free pin-headed glass securely fixed in position. The ventilator shall be fixed to the wall opening with proper alignment, 100% packing, screws and silicone sealant all around the frame to ensure a firm and watertight installation. All materials shall be of approved make and the ventilator shall be got approved by the Executive Engineer before use on work, complete in all respects including cost of materials, labour, fittings, conveyance and installation, |
| 67 | Providing and fixing 35 mm thick factory-made pre-laminated ABS (Acrylonitrile Butadiene Styrene) door shutters of approved make and design, moulded in different patterns, complete with all fittings and accessories. The door shutter shall consist of an all-round frame made of waterproof solid foam PVC bars of size 20 mm × 32 mm, reinforced with 32 mm × 32 mm LVL (Laminated Veneer Lumber) vertical members (2 Nos.). The core shall be of 32 mm thick high-density craft paper honeycomb board, sandwiched on both sides with 1.5 mm thick pre-laminated ABS sheets, and finished with 0.45 mm thick PVC edge banding on the vertical sides. The shutter shall be provided with steel-coated butterfly hinges (3 Nos. per shutter) and ISI-marked stainless steel round lock, complete. The rate shall include cost of materials, labour, fittings, conveyance, installation and finishing, complete in all respects and complying with standard specifications. The door shutter and frame shall be got approved by the Executive Engineer before use on work |
| 68 | Providing and fixing UPVC / solid PVC door shutters or partition walls with jambs, complete with all fittings and accessories, as per approved specifications and directions of the Engineer-in-Charge. The shutter and frame shall be fabricated using 19 gauge, 19 mm MS square tubes for styles and outer frames, and 15 mm MS square tubes for top rail, lock rail and bottom rail. The steel members shall be fully covered with 5 mm thick solid PVC sheets. The shutter panelling shall be made of 5 mm thick solid PVC sheets, rigidly fixed in position. The overall size of styles shall be 50 mm × 30 mm, the overall size of top rail, lock rail and bottom rail shall be 75 mm × 30 mm, and the overall size of frames shall be 50 mm × 45 mm, provided with suitable rebate for housing the shutter. The work shall include supplying and fixing of all necessary furniture and fittings, complete. All materials shall be of approved make and quality, and the shutter, partition and frame shall be got approved by the Engineer in charge before use on work, complete in all respects including cost of materials, labour, fittings, conveyance and installation, |
| 69 | Supplying, assembling, lowering and fixing in true vertical position in bore well unplasticized PVC (UPVC) medium well casing (CM) pipes of required diameter, conforming to IS: 12818, including all necessary hire and labour charges, jointing, couplers, fittings, accessories, tools and tackles, complete for all depths, as directed by the Engineer-in-Charge. The work shall further include supplying and fixing UPVC medium well screen (RMS) pipes of 200 mm nominal diameter, conforming to IS: 12818, including assembling, lowering and fixing in vertical position in bore well, complete. The item also includes supplying, filling, spreading and leveling graded stone boulders of size ranging from 5 cm to 20 cm in the recharge pit, laid to the required thickness, including all leads and lifts, complete. Additionally, providing and fixing suitable size threaded mild steel cap or spot-welded MS plate to the top of bore well housing / casing pipe, removable as per requirement, complete. The work further includes supplying and installing submersible pump set of required capacity (Texmo make or equivalent, local market) with starter, complete in all respects. All operations such as handling, alignment, lowering, fixing, jointing, leveling, and finishing shall be carried out carefully to avoid damage and ensure proper functioning. The entire work shall be executed strictly as per CPWD DSR 2023 specifications, directions of the Engineer-in-Charge, and shall include all incidental charges, complete in all respectsSupplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia (unplasticized PVC medium well screen (RMS) pipes ) |
| 70 | \"Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge |
| 71 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell |
| 72 | Supplying Assembling lowering and fixing the Submersible Motor 2HP Texmo with starter in vertical position (Local Market) |
| 73 | Providing and constructing septic tank with soak pit as per approved drawings, site requirements and directions of the Engineer-in-Charge, complete in all respects and complying with standard specifications. The work shall include excavation of earthwork by mechanical means and/or manual means in all kinds of soil to required depth and dimensions, including dressing of sides, ramming of bottoms, dewatering wherever necessary and disposal of surplus earth, complete. Providing and filling sand in foundation, basement and refilling, laid in layers not exceeding 15 cm thick, well watered, rammed and consolidated.Providing plain cement concrete (PCC) 1:2:4 using 40 mm gauge hard broken granite stone aggregate for foundation bed, laid in layers, well compacted and cured, complete. Providing and constructing brick masonry with common burnt clay non-modular bricks of class designation 7.5 in cement mortar 1:4 for walls of septic tank and soak pit in all shapes and sizes, complete. Providing centering and shuttering including strutting, propping and removal of formwork for foundations, walls, slabs and other RCC components.Providing and laying reinforced cement concrete (RCC) work in slab / cover slab / beams as required, using concrete mix 1:1.5:3 with 20 mm graded stone aggregate, excluding cost of centering and shuttering, complete. Supplying, cutting, bending and placing Thermo-Mechanically Treated (TMT) reinforcement bars of Fe-500D grade or higher, including binding with wire, complete. Providing internal and external plastering to septic tank walls with cement mortar 1:3, finished smooth, including curing, complete.Providing and filling sand around the septic tank and soak pit after construction, well compacted. Supplying, filling, spreading and leveling stone boulders of size 5 cm to 20 cm in soak pit / recharge pit to required thickness, including all leads and lifts, complete. The entire work shall be carried out as per CPWD DSR 2023 specifications, relevant IS codes, and directions of the departmental officers. The rate shall include cost of materials, labour, conveyance, tools & plants, curing, testing, making good disturbed portions and all incidental charges, complete in all respectsExcavation work by mechanical means (Hydraulic excavator)/ manual means including cost of all materials and hirecharges of tools and plants etc complete.as directed by the engineer in charge |
| 74 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 75 | Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 76 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 77 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 78 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 79 | supplying and providing Thermo-Mechanically Treated bars of grade Fe-500D or more including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 80 | Plastering with cement mortar 1:3 (1 cement : 3 coarse sand) on brick/stone masonry or concrete surfaces, including surface preparation, raking of joints, cleaning and wetting, applying plaster to the specified thickness, finishing smooth and even, curing complete, including cost of materials, labour, scaffolding and all incidental charges, and directions of the Engineer-in-Charge. |
| 81 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. including cost of all labour charges tools and incidental charges etc complete as directed by the Engineer in charge. |
| 82 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer in-charge |
| 83 | Location: Quarters 1 to 8. (Block 1 to 4) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
