|
| 1 | Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness. |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stackingserviceable materials at site and removing rubbish as directed. within a lead of 75 m. In all floor including roof. |
| 3 | Dismantlingalltypesofplaincementconcrete works,stackingserviceablematerialsatsiteand removingrubbish asdirected withina leadof 75m. In all floor including roof. upto 150 mm. thick |
| 4 | Removalofrubbish, earthetc.fromtheworking siteanddisposalofthe samebeyondthe compound,inconformitywiththeMunicipal/ Corporation Rules for such disposal, loading into truckandcleaningthesiteinallrespectasper direction of Engineer in charge |
| 5 | Earthworkinexcavationoffoundationtrenchesor drains,inallsortsofsoil(includingmixedsoilbut excludinglaterite orsandstone) includingremoving, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm. |
| 6 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation. |
| 7 | Fillinginfoundationorplinthbysilversandin layers not exceeding 150 mm as directed and consolidatingthesamebythoroughsaturationwith water, ramming complete including the cost of supply ofsand.(paymenttobemadeonmeasurementof finished quantity) |
| 8 | Supplying of brick on edge by 1st class brick/ picked jhamma bricks @ 8nos of brick per m |
| 9 | Laying of brick on edge by 1st class brick/ picked jhamma bricks @ 8nos of brick per m |
| 10 | SingleBrickFlatSolingofpickedjhamabricksincludingrammingand dressing bed to proper level and filling joints withlocal sand. |
| 11 | OrdinaryCementconcrete(mix1:2:4)withgradedstonechips(20mm nominal size) excluding shuttering and reinforcement,ifany, in all floor as per relevant IS codes. |
| 12 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement, if any, in gound floor as per relevant IS codes. |
| 13 | R.C.C. (1:1.5:3) |
| 14 | Reinforcement for reinforced concrete work inall sorts of structures includingdistributionbars,stirrups,bindersetcinitialstraighteningand removal of loose rust (if necessary), cutting to requisite length, hooking and bendingtocorrectshape,placinginproperpositionandbindingwith16 gaugeblackannealedwireateveryintersection,completeasperdrawing and direction. For works in foundation and upto roof of all floor/upto 4 m. SAIL / TATA/RINL |
| 15 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thicknesswithrequiredbracingforconcreteslabs,beamsandcolumns, lintelscurvedorstraightincludingfitting,fixingandstrikingoutafter completion of works (upto roof of all floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 16 | Brick work with 1st class bricks in cement mortar (1:4). In foundation and plinth |
| 17 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar includingroundingofforchamferingcornersasdirectedand rakingoutjointsincludingthroating,nosinganddripcourse, scaffolding/staging wherenecessary(allfloor).[Excluding cost of chipping over concrete surface]. With 1:4 cement mortar. 20 mm thick plaster |
| 18 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m. |
| 19 | Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed. From 50 mm to 100 mm thick |
| 20 | Supplying spreading and consolidating stone metals (63-45 mm packed with stone dust for 75 thick consolidated thickness laid in layers including screeing of metals etc. |
| 21 | Tack CoatProviding and applying tack coat with cationic bitumen emulsion of approved grade conforming to IS 8887-1978 on the prepared surface cleaned with hydraulic broom. On Bituminous Surface (Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg. per sqm.) |
| 22 | Bituminous Macadam using Mobile Hot Mix Plant (Light Duty) Providing and laying bituminous macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading (B) For Grading II (19 mm. nomiunal size, 50-75 mm. thick) |
| 23 | Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface including line, grade and level to serve as wearing course on a previously prepared base |
| 24 | Seal CoatProviding and laying Premixed Seal Coat (Type-B) with approved quality sand/grit @0.6 Cum./100 sqm. And bitumen binder on thoroughly cleaned black top surface coated with tack coat |
| 25 | Spreading of sand over the bituminous surface @ 0.003 m3 per m2 of surface from the road side stacks and carriage of the same up to a distance of 150 m from stack complete including cost of sand. |
