Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stonewall etc. including raking out joint, hacking for key,scrubbing down withwater, etc complete all as specified and directed. |
| 2 | M&L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 onfair faces of mixed withWPC as per manufacturer’sinstructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specifiedand directed.Note : WPC shall be measured and paid separately |
| 3 | Supply only Integral water proofing compound complete all as specified and directed. |
| 4 | M&L rendering 15mm thick plaster in CM (1:6), onfair faces of brick workor concrete surfaces, finished the surfaces smooth,with using extra cement complete all as specifiedand directed. |
| 5 | M&L rendering 5mm thick plaster in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even andsmooth (without using extra cement), complete all as specified and directed. |
| 6 | M&L rendering 10mm thick plaster in CM (1:3), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufactures instructions but not less than 3% by weight of cement complete all as specifiedand directedNote : WPC shall be measured and paid separately |
| 7 | M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 8 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over alkali resistant priming paint preparatory to distempering complete all as specified and directed. |
| 9 | M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 10 | Preparation of old decorated plastered/un-plastered surfaces of any height of walls of any description, pillars, cornices by brooming washing, rubbing down and stopping of distempered and paintefd surface wire brushing, scrubbing down smoke, soot, mould moss and efflorescent, salts, trading oil and greasy spots and applying two coat of white wash (lime) complete all as specified and directed. |
| 11 | All as per Item No 10.00 here-in-before but two coats on ceiling |
| 12 | All as per item No 10.00 here-in-beforebut two coat of Colour Wash |
| 13 | All as per item No 10.00 here-in-before but two coat of oil bound distemper |
| 14 | All as per item No 10.00 here-in-before but one coat of cement base paint |
| 15 | M&L preparing surfaces of old woodensurfacesof any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | All as per item No 15.00 here-in-before but not exc 10 cm width or girth on wooden surface |
| 17 | M&L preparing surfaces of old steel surfaces of any description not otherwise described but applying one coat of synthetic enamel paint on old steel surface complete all as specified and directed. |
| 18 | All as per item No 17.00 here-in-before but not exc 10 cm width or girth on steel surface |
| 19 | M&L 3mm thick wall care putty on wall complete all as specified and directed. |
| 20 | M&L applying two coats of interior emulsionover and including a coat of alkali resistant cement based primer over one coat of birla white wall care putty on wall/ceiling etc surfaces & smoothening the surfaces with sand/emery papers etc,including complete removal of existing treatment of any description before applying complete all as specified and directed. |
| 21 | M&L removing existing treatment of any description completely by wire brush and washing the surface with water thoroughly and applying two coats of exterior acrylic emulsion base premium quality weather coat exterior anti fungal paint over a coat of primer plastered surfaces after giving oil putty treatment complete all as specified and directed.Note : Primer and painting shall be carried out using roller only. |
| 22 | Demolition of cement concrete in ground floor paving n. exc15 cm thickness below or above ground level complete all as directed |
| 23 | M & L for 25 mm thick PCC1:2:4type B0 using 12.5 mm graded stone aggregate as in floor finished even and smooth with out using extra cement complete all as specified and directed. |
| 24 | Dismantling floor,hearth or wall tilling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified. |
| 25 | M&L for virified ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc laid over & including 15 mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 26 | M&L virified ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirting etc laid over & including 10 mm rendering in CM 1:6set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | M & Lnon skid ceramic coloured & designer tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm,in floors/skirtinglaid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed. |
| 28 | M & L glazed ceramic coloured & digital tiles 350 x 250 x 7/450x350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointedin white/coloured cement tomatch shade of tiles over and including10mm thick rendering in CM 1:4 complete all as specifed and directed |
| 29 | M & LMachine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 20 mm thick CM 1 : 6 bedding complete all as specified and directed. |
| 30 | M & LMachine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rendering 10 mm thick CM 1:4 complete all as specified and directed. |
| 31 | M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite, including 15mm thick Screedbed in CM 1:4 complete all as specified and directed. |
| 32 | M&Lfor 75mm thickPCC1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, complete all as specified and directed. |
| 33 | Demolition of brickor stone masonary built in cement mortar or cement lime motar complete all as specified and directed. |
| 34 | M & L brick workwith modular sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed. |
| 35 | M&L forrendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed. |
| 36 | M & L preparing surface of oldplasteredwalls and applying two coats of oil bond distemper over alkali resistant priming preparatory to distempering complete all as specified and directed. |
| 37 | Taking down chowkats or frames not exceeding 1.5 Sqmeach (Without taking off shutters from the frame) & removing from site complete all as specified and directed. |
| 38 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed. |
| 39 | S&F 2nd class teak HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 40 | S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass,gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etcsize of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-charge. |
| 41 | S & F 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 42 | S&F factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed. |
| 43 | S & F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick ( stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings complete all as specified and directed. |
| 44 | M&L for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 45 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 46 | Supply and fixing Anodised Aluminium grills of deco grill No DG-916 pattern thickness of grill 7.5 mm aperture size complete all as specified and directed. |
| 47 | Supply and fixing 5.5 mm Sheet glass, ordinary quality and glazing exc 0.5 Sqm complete all as specified and directed. |
| 48 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 49 | S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified and directed. |
| 50 | M&L 3mm thicksheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified. |
| 51 | All as per item No 50.00 here-in-before but frosted glass at one side. |
| 52 | S & F 100 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-1 complete all as specified and directed. |
| 53 | S & F 75 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-1 complete all as specified and directed. |
| 54 | S&F 100 mm longMildsteel but hings medium weightcomplete all as specified and directed. |
| 55 | S&F 75 mm longmildsteel but hings medium weight complete all as specified and directed. |
| 56 | S &F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete all as specified and directed. |
| 57 | S & F 100mmlong extroded aluminium alloy handles, fabricated type anodized complete all as specified and directed. |
| 58 | S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 59 | S & F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 60 | S/F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 61 | S & FM S 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 62 | S&F in repair floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete all as specified and directed. |
| 63 | M&L for preparing of newsurface of wood and wood based materials of any descriptionnot otherwise described over 10cm width or girthand apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 64 | M&L for complete removal of wood and wood based materials of any descriptionnot otherwise described over 10cm width or girthand apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 65 | M&L preparation of new steel surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth complete all as specified and directed. |
| 66 | S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash down water closet pan Padestal patternwhite excluding fixing bolts, flushing cistern and flush pipe with and incl \"P\" or \"S\" trap and making good to floor to match with existing all as specified and directed. |
| 68 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level ,white, with inlet, ball valve,float and handle including brackets complete all as specified and directed. |
| 69 | S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550×400 mm including cutting for and pinning in ends of brackets including brackets but exclusive taps,waste, chain and leg porcelain stop pan complete all as specified and directed. |
| 70 | S&F in repairs Bib tap 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified and directed. |
| 71 | S&F in repairs Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed. |
| 72 | S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long screwed shanks and flynuts, screwedfor iron pipe complete all as specified and directed. |
| 73 | S&F in repairs 15mm bore Bib tap standard of cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.. |
| 74 | S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated,cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 75 | S&F in repairs 15mm bore, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 76 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 77 | S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm complete all as specified and directed. |
| 78 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 79 | S&Fin repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed. |
| 80 | S&Fin repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed. |
| 81 | S & F 75 mm dia, PVC bend complete all as specified and directed |
| 82 | S&F 110mm dia PVC bend with access door complete all as specified and directed |
| 83 | S&F 110mm bore PVC junction single \"T\"equal with provided access door complete al as specified and directed |
| 84 | S&F PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed |
| 85 | S&F PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed |
| 86 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed |
| 87 | Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 88 | S&F UPVC waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia complete all as specified and directed |
| 89 | S&F UPVC waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia complete all as specified and directed |
| 90 | S&F 50mm bore High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sqm in waste pipe for WHB and sinks,complete all as specified and as directed. |
| 91 | S&F in repairs waste coupling/fitting brass chromium plated for steel sinks,basins etc. with long screwed shanks and fly nuts,flange and bedded in red head cement and other end fixed of bore 32/40 mm complete all as specified and directed. |
| 92 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including edding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 93 | M&L 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed. |
| 94 | Taking down 25 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 95 | Refixing old 25 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed. |
| 96 | M&L for 25 mm dia tubes, \"medium grade\", galvanised, with all fitting; fixed to wall, laid in trenches incl necessary cutting chasing pinning and making surface good complete all as specified and directed. |
| 97 | Taking down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 98 | Refixing old 20 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed. |
| 99 | M&L for 20 mm dia tubes, \"medium grade\", galvanised, with all fitting; fixed to wall, laid in trenches incl necessary cutting chasing pinning and making surface good complete all as specified and directed. |
| 100 | Taking down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 101 | Refixing old 15 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed. |
| 102 | M&L for 15 mm dia tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting, chasing, pinning and making surface good complete all as specified and directed. |
| 103 | S&F Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 104 | S&F Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 105 | Dismantling exc1000 and n.exc 2000 ltr cpacity water tanks and removing to store complete all as specified and directed. |
| 106 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixedcomplete all as specified and directed.Note : PVC tank shall be ISI marked and having three layers. |
| 107 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and directed. |
| 108 | S&F in repairstubular towel rail aluminium anodised , 20mm dia, 60cm longbetween flanges complete all as specified and directed. |
| 109 | Demolition of RCCin any descriptionand any position (reinforcement cut as required to facilitate demolition ) complete all as specified directed |
| 110 | M&L precastRCC 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete |
| 111 | Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete. |
| 112 | Cutting into existing manholes for connecting new drains, 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete. |
| 113 | Demolition and taking out of cinder/lime/lean concrete from sunken portion of WC and bath and deposited complete all as directed at site. |
| 114 | M & L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in sunken floor .average thickness 40mm and making adequate slop towards spout pipe etc complete all as directed at site. |
| 115 | S&F in repair vitreous china bowl urinal flat back,size of 430 x 370 x 340 mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern,flush pipe and waiste pipe) |
| 116 | M&L health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position completein all respect complete all as specified and directed. |
| 117 | M&L for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) complete all as specified and directed. |
| 118 | Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed. |
| 119 | S&F in repair suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm comprising of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HPSC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. |
| 120 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 121 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 122 | M & L Machine pressed precast coloured concrete interlocking paver block any shape and size of 80mm thickness with grey cement and pigment complete all specified and directed. |
| 123 | M&L for 50mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface complete all as specified and directed. |
| 124 | M&Lfor 75mm thickPCC1:3:6 type C-2 using 40mm graded stone aggregate as in Sub base of flooring complete all as specified and directed. |
| 125 | M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cmX30cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engineer-in-Charge |
| 126 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified and directed. |
| 127 | Taking down carefully any type of old unserviceable submain wiring with PVC/steel conduit surface / concealed or wooden battensetc and making good the disturbed surfaces to match with the existing surface complete all as specified and directed. |
| 128 | M&L point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn intoand concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylum sheet/plastic laminated white sheet cover for mounting normal/modular switches, sockets, fan regulators fixed with CP screws with cup wahsers as required and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 with putty to match with the existing surfaces for One light Point/Fan point/Bell point controlled by one switch complete all as specified and directed.Note:- (a) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (b) Conduit will not be concealed in ceiling but fixed on ceiling surface only. |
| 129 | As as per item No 128.00 here-in-before but for one socket point 5 Amp controlled by one switch on same board |
| 130 | As as per item No 128.00 here-in-before but for onesocket point 5 Amp controlled by one switch on Independent board |
| 131 | Description same all as per item No. 128.00 here in before but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board |
| 132 | M&L point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into existing PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/ Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick plastic laminated white sheet cover for mounting normal/modular switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for One light Point/Fan point/Bell point controlled by one switch complete all as specified and directed. |
| 133 | As as per item No 132.00 here-in-before but for one socket point 5 Amp controlled by one switch on same board. |
| 134 | As as per item No 132.00 here-in-before but for onesocket point 5 Amp controlled by one switch on Independent board. |
| 135 | Description same all as per item No.132.00 here in before but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board |
| 136 | M&L drawing the wire in with casing caping or conduit complete with point wiring withFRLSHPVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wireto common earth dolly in andsunkenterminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmicalaminated sheet coveror inner outer plates for modular switches with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface for one light/ Fan / Bell Point controlled by one switch complete all as specified and directed. |
| 137 | As as per item No 136.00 here-in-before but for one socket point 5 Amp controlled by one switch on same board. |
| 138 | As as per item No 136.00 here-in-before but for onesocket point 5 Amp controlled by one switch on Independent board. |
| 139 | As as per item No 136.00 here-in-before but drawing in with casing caping or conduit on surface all as directed complete with point wiring using 2.5 Sqmm (Nominal area)triple layerFRLSPVC insulated unsheathed copperconductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 2.5 sqmm with one single run copper wire as continuous earth wireto common earth dolly |
| 140 | M&L Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit, concealed, medium grade not less than 20 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified and directed.Note : Two run of 4 Sqmm & one run of 4.0 Sqmm cable and conduit shall be measured as one unit run. |
| 141 | M&L Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit,concealed, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. Note : Two run of 6 Sqmm & one run of 6 Sqmm cable and conduit shall be measured as one unit run. |
| 142 | M&L Sub main wiring with two single core PVC Insulated cable two run of size 10.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit,concealed, medium grade not less than 25 mm dia with all conduit accessories and one run of 10.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. Note : Two run of 10 Sqmm & one run of 10 Sqmm cable and conduit shall be measured as one unit run. |
| 143 | M&L wiring with four single core, multi stranded,PVC insulated, 1100 Volt grade, FRLS,cable with copper conductor of size 10 Sq mm in and including/ drawing through rigid non metalic PVC conduit, concealed or on surface as per directed, medium grade not less than 25 mm dia with all conduit accessorie including continuous PVC insulated copper conductor single core earth continuity conductor of size 10 Sqmm connected common earth complete all as specified and directed.Note :4x 10 Sq mm conductor cable, 1 x 10 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length. |
| 144 | S&Fcall bell ding dong sound type suitable for AC 230 volt single pole complete all as specified and directed. |
| 145 | S&F switch bell push flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified and directed. |
| 146 | S&F switch piano flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified and directed. |
| 147 | S&F socket outlet 2 in 1, 5 Pin 5 Amp flush type of polycarbonate body complete all as specified and directed. |
| 148 | S&FSwitch socket combination 5 in 1, 5pin 5/6 Amps flush type universal of polycabonate body complete all as specified and directed. |
| 149 | S&FSwitch socket combination 5 in 1, 5pin 6/16 Amps flush type universal of polycabonate body complete all as specified and directed. |
| 150 | S&F Lamp holder, PVC/ polycarbonate type with back plate for angle holder all as per specified and directed. |
| 151 | S&F Ceiling rose surface type 60x30 mm three terminals of polycarbonate body complete all as specified and directed. |
| 152 | S&F 120W stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. ISI marked complete all as specified and directed. |
| 153 | S&F in replacement of modular switch6-10Amps one module230 volts AC as per existing model/make complete all as specified and directed. |
| 154 | S&F in replacement of modular switch16 Amps one module230 volts AC as per existing model/make complete all as specified and directed |
| 155 | S&F in replacement of modular socket, 6A -2/3 pin combined 2 module,230 volts AC as per existing model/make complete all as specified and directed. |
| 156 | S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module,230 volts AC as per existing model/make complete all as specified and directed . |
| 157 | S&F in replacement modular bell push switch piano, flush type, 6 Amps complete all as specified and directed. |
| 158 | S&F in replacement modular fan regulator, 2 Module 4 step 180 W heavy duty 230 volts as per existing model/make complete all as specified and directed. |
| 159 | S&F PVC rectangular block of size 200 x150 x50mm for mounting switches, sockets/ fan regulator etc with 3mm thick plastic laminated sheet cover complete all as specified and directed. |
| 160 | S&F in replacement of PVC insulated, unsheathed twin twisted copper conductor wire of nominal size 23/0.0076, 1100 volt grade, ISI marked, complete all as specified and directed. |
| 161 | Taking down old unserviceable DBs/Main switches any type/size complete with all accessories and remove from site complete all as specified and directed. |
| 162 | S&F Sheet metal enclosure for DBs, 4 way, TP & N, double door type, 440 Volt, suitable for MCB/MCCBs incomer complete all as specified and directed.Note : MCBs/ MCCBs will be measured and paid separately. |
| 163 | S&F Sheet metal enclosure for DBs , 8 way, SP & N, double door type, 240 Volt complete all as specified and directed. Note : MCBs will be measured and paid separately. |
| 164 | S&F MCCB, four pole, 125 Amp, 415 Volt, of breaking capacity 16 KA complete all as specified and directed. |
| 165 | S&F 415V 10KA \"C\" curve miniature circuit breaker (MCB), TPN, 63 Amps current carrying capacity in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 166 | S&F 240V 10KA \"C\" curve miniature circuit breaker (MCB), SPN, 40 Amps current carrying capacity in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 167 | S&F 240V 10KA \"C\" curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity in the DB complete with connection, testing and commissioning, complete all as specified and directed. |
| 168 | S&F in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 169 | S&F in repair rigid non metallic, heavy duty, PVC casing caping of size 32 x 16 mm with all accessaries such as couplers, lock nuts, saddles, hook, tees, bends, etc., complete all as specified and directed. |
| 170 | S&F in repair of Smart bright Batten Series, LED luminaire using LEDs 20/22 watt min100 LM/watt, natural white(4000K)/ cool white (6500k), THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light outputwith wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 171 | S&F in repairs LED Mirror light fitting 2 ft tubelight 10 watt aluminum housing and integrated electronic driver THD max 10 % ,CRI min 80 % complete with fixing arrangements on wall complete all as specified and directed. |
| 172 | S&F in repairs LEDlight fitting square 2\"x2\" 35/36 watt, 3000 lumen, Cool white 6500K/ Warm white 5700K, all as per direction, THD max 10 % ,CRI min 80 % warm whitealong with fixtureSurface / Recessed /Pendent mounting LED luminaries with diffuserchannel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three coreflexibleflexible copper conductor cable suitable size complete all as specified and directed. |
| 173 | Supply & fixing in repair LED light down lighter by recess or surface mounted15 watt, warm white, circular/Square, 1200 lumen with fixing arrangemnts on ceiling complete all as specified and directed. |
| 174 | S&F in replacement ofLED Security Light Luminaire 35 wattwith 2500 or more lumen warm white, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole/wall fitting clamps made out of MS flat , nutsand boltsand painting with aluminium paint complete all as specified and directed. |
| 175 | S&F in repairsLED Bulb230V AC9 watt warm white or yellow/cool day light 6500K as per the direction/requirement of sitecomplete all as specified and directed. |
| 176 | Taking down carefully ceiling fan/exhaust fan any type, size or make with cable and all accessoreis remove from site to store for repair/overhaulling complete all as specified and directed. |
| 177 | Overhauling of Ceiling fan 1200/1400 mm sweep by opening and cleaning rotor, bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on complete all as specified and directed. |
| 178 | Dismantling of Ceiling fan 1200/1400 mm sweep along with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan, taking out starter, rotor winding, ball bearing, gun metal bush etc complete to carry out the folling repairs :-(a)Removing of burnt out fan winding and rewinding it with suitable size of Copper enamelled wire (weight of copper coil shall be same as per dismantled fan), heating and varnishing as per manufactures design & direction. (b)Re-assembling the ceiling fan by fixing only serviceable spare parts complete to give designed air delivery including greasing, oiling etc, reconnecting / hanging in original position, reconnecting the electric cables and testing complete all as specified and directed.Note : Items required to be replaced will be measured and paid separetely in relevent irems. |
| 179 | M&L painting of ceiling fans (1200 mm/ 1400 mm) complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dusts including writing of MES Nos in black paint complete all as specified and directed. |
| 180 | Overhauling of exhaust fan 300 mm to 400 mm sweep (steel body/pvc body) after opening and cleaning rotor, bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion complete all as specified and directed. |
| 181 | Dismantling of exhaust fan 300/400 mm sweep, unscrewing the body parts, taking out starter, rotor winding, ball bearing, gun metal bush etc.,removing of burnt out fan winding and rewinrng it with suitable size of Copper enamelled wire (weight of copper coil shall be same as per dismantled fan), heating and varnishing as per manufactures design & direction, re-assembling the fan by fixing only serviceable spare parts complete to give designed air delivery including greasing, oiling etc, refixing the same in original position, reconnecting the electric cables and testing complete all as specified and directed.Note : Items required to be replaced will be measured and paid separetely in relevent irems. |
| 182 | Supply only fan condensor 2.5 to 3.15 MFD, 230 volts, 50 Hz AC confirming to IS 1709 complete all as specified and directed. |
| 183 | Supply only fan condensor 4 MFD, 230 volts, 50 Hz AC confirming to IS 1709 complete all as specified and directed. |
| 184 | Supply only Gun metal bush 15 mm size as per sample complete all as specified and directed. |
| 185 | Supply only split pin of size 25 mm long complete all as specified and directed. |
| 186 | Supply only Ball bearing of size 6201/6202/6203 as per sample complete all as specified and directed. |
| 187 | Supply only \"U\" shape shackle clamp assembly incl. checknut, bolts, screws, washer, lock nut, rubber reel etc.and connecting complete all as specified and directed. |
| 188 | Supply only fan hook made out of steel bar as per sample complete all as specified and directed. |
| 189 | Taking down existing old Extg unserviceable LT UG cable of any description and size complete all as specified and directed. |
| 190 | Supply, Laying and testingXLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable or fixed to wall/passing through pipe/pole incl necessary aluminium thimbles, jointing and testing of the size 70 sqmm x 3.5 core complete all as specified and directed. |
| 191 | S&F rigid non metallic, heavy duty, PVC cable truncking of size 75 mm(W) x 50 mm(H)with all accessaries such as couplers, lock nuts, saddles, hook, tees, bends, etc suitable for 70-95 sqmm x 3.5 core LT cable, fixed to wall complete all as specified and directed. |
| 192 | M&L earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I)including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm graded crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete all as specified and directed.Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. |
| 193 | Schedule of credit amount of Rs. 78,451.50 to be deducted during AOC. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
