|
| 1 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified and as directed |
| 2 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness(below & above GL) unreinforced complete all as specified and as directed |
| 3 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete complete all as specified and as directed |
| 4 | M&L for PCC 1:4:8 Type D-2 (using 40mm graded Agg) as in foundations, filling and mass concrete complete all as specified and as directed |
| 5 | M&L Brickwork with subclass ‘B’ bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 CM complete all as specified and as directed |
| 6 | All as per above item no.05but except bricks complete all as specified and as directed |
| 7 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed. |
| 8 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 except stone complete all as specified and as directed. |
| 9 | M & L for Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, finished even and smooth W/O using extra cement complete all as specified and as directed. |
| 10 | M & L for Providing, cement concrete Type B-0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and as directed |
| 11 | M&L Cement concrete Type C2 (1:3:6) using 40 mm graded aggregate in surface channels and drainscomplete all as specified and as directed. |
| 12 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed |
| 13 | M & L for Per- cast cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover complete all as specified and as directed |
| 14 | M & L for TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 15 | M & L for Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and as directed |
| 16 | M&L for 150mm thick Cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sub base of floors and pavings, complete all as specified and directed. |
| 17 | M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed |
| 18 | Finishing surface of concrete roads, pavements, by brooming complete all as specified and as directed |
| 19 | M & L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade Aupto 100mm thick concrete slab provided complete all as specified and as directed |
| 20 | M&L Forming Contraction (Dummy) joints Grade \"A\" 65mm deep x 10mm wide,filled with sealing compound complete all as specified and directed. |
| 21 | M & L for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 22 | M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed. |
| 23 | M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment complete all as specified and as directed |
| 24 | M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed |
| 25 | M & LChequered cement concrete tiles of size 30cm x 30cm x 22-25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclcutting, rubbing, grindingcomplete all as specified and as directed |
| 26 | M&L PCC 1:2:4 Type B1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed |
| 27 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed |
| 28 | Demolition of cement concrete (Unreinforced)of any description and in any position not otherwise specifically provided for (in roof) complete all as specified and as directed |
| 29 | M&L 25mm thick PCC 1:2:4 type B-0 ( 12.5mm graded stone agg) as in sub base to received tiles in floors complete all as specified and as directed. |
| 30 | M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than 300mm x 300mm as in parking/hardstanding etc including 15 mm thick screed bed in CM 1:4, set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles complete all as specified and as directed |
| 31 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed |
| 32 | M & L for Reinforced cement concrete Type B1 1:2:4 (Nominal Mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like (20 mm graded aggregate) complete all as specified and directed. |
| 33 | S&F Reinforced concrete pipes,250mm dia class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 34 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 35 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 36 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
