Tender For Balance Pipeline Laying Works Including Hdd Works For Uran Usar Pipeline Project, Raigad-Maharashtra

TDR : 53370654

Tender Notice
BOQ

12 Days Left

Raigad , Maharashtra

Tender Brief : Tender For Balance Pipeline Laying Works Including Hdd Works For Uran Usar Pipeline Project

Document Fees
Refer document

EMD
₹ 2783898.0 /-

Tender Value
Refer document

Submission Date
22-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	BALANCE PIPELINE LAYING & HDD WORKS FOR URAN-USAR PIPELINE
2	METALLIC MATERIALS AND CORROSION
3	Magnetic Cleaning and Electronic Geometry Pigging
4	Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification C378-000-06-41-EGP-0001:A) MobilisationB) DemobilisationNOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.
5	Magnetic Cleaning:Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.
6	Electronic Geometry Pigging:Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.
7	Defect Verification:Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge.NOTE: Unit EACH signifies each segment of the pipeline.
8	Final Report:Preparation of final work report as per agreed format and submission to Client / Client\"s Consultant in total of 4 copies.
9	CATHODIC PROTECTION
10	Temporary Cathodic Protection System
11	Survey, Design, Detail Engineering, Supply, installation, testing and commissioning, Post commissioning surveys, interference mitigation of the cathodic protection system of the pipeline. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC and specification no: B378-200-06-45-CSW-03 Rev.0
12	ELECTRICAL WORKS
13	MISCELLANEOUS CONTROL GEAR
14	Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations),including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
15	Weight of the unit up to 5 kg.
16	Weight of the unit above 5 kg. but upto 20 kg.
17	ANCHOR FASTENERS
18	Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
19	3/16\" BSW.
20	5/16\" BSW.
21	1/4\" BSW.
22	3/8\" BSW.
23	TESTING AND COMMISSIONING OF MOTORS
24	Testing and commissioning of safe area/ FLP motor operated valve actuators with integral starter of different sizes, checking of all interface connections, local/remote controls, settings of limit and torque switches, no load/full load running, including all labour and materials,as per specifications of this tender and directions of Engineer-in-Charge.
25	Safe area/FLP motor operated valve actuators.
26	SUPPLY OF MV CABLES
27	Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
28	2 C x 2.5 sq. mm
29	3 C x 2.5 sq. mm
30	2 C x 4 sq. mm
31	3 C x 4 sq. mm
32	Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
33	2 C x 25 sq. mm
34	3 C x 25 sq. mm
35	3.5 C x 35 sq. mm
36	3.5 C x 50 sq. mm
37	Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.
38	12 Pair x 2.5 sq. mm
39	LAYING OF CABLES
40	Laying of cables (using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
41	Cables with OD upto 20 mm.
42	Cables with OD above 20 mm but upto 30 mm.
43	Cables with OD above 30 mm but upto 40 mm.
44	END TERMINATIONS
45	Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but includingfixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
46	Cables with OD upto 20 mm.
47	Cables with OD above 20 mm but upto 30 mm.
48	Cables with OD above 30 mm but upto 40 mm.
49	Cables with OD above 40 mm but upto 50 mm.
50	Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations,cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
51	All sizes from 1P to 4P and upto 2.5 sq. mm
52	All sizes from 11P to 15P and upto 2.5 sq. mm
53	G.I. & PVC PIPES
54	Supply and laying of following sizes ofG.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
55	50 mm NB.
56	100 mm NB.
57	150 mm NB.
58	STRUCTURAL STEEL
59	Supply, fabrication, galvanising andinstallation of base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including welding, bolting, rivetting, supply of necessary anchor bolts and grouting etc., including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid).
60	CABLE - TRAYS
61	Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
62	300 mm wide Straight run cable tray.
63	600 mm wide Straight run cable tray.
64	Horizontal bends for 300 mm wide tray with 1000 mm bending radius.
65	Vertical outside bends for 300 mm wide tray with 1000 mm bending radius
66	Installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
67	100 mm wide.
68	CABLE GLANDS
69	Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
70	Cables with OD upto 20 mm.
71	Cables with OD above 20 mm but upto 30 mm.
72	Cables with OD above 30 mm but upto 40 mm.
73	Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
74	Cables with OD upto 20 mm.
75	Cables with OD above 20 mm but upto 30 mm.
76	Cables with OD above 30 mm but upto 40 mm.
77	Cables with OD above 50 mm but upto 60 mm.
78	Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
79	Cables with OD up to 20 mm
80	Cables with OD above 20 mm but upto 30 mm
81	Cables with OD above 30 mm but upto 40 mm
82	MARKERS
83	Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
84	Supply and installation of earth pit markers for directly buried GI pipe electrodes as per std. 7-51-0101 with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation, including all labour and materials, as per approved drawings, specifications of this tender and direction of Engineer-in-Charge.
85	CABLE LUGS
86	Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
87	All sizes upto 10 sq. mm
88	All sizes from 16 to 35 sq. mm
89	LIGHTING POLES
90	Supply and installation of Lighting Poles for floor mounting as per std. 7-51-0201, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
91	Lighting poles including supply and connection of wires upto fixtures for safe areas.
92	Lighting poles for hazardous areas.
93	Supply andinstallation of street lighting poles (single bracket/double bracket) including built in marshalling box andnecessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs,including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
94	Poles as per std. 7-51-0235 sht. 1 of 2
95	HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES
96	Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
97	Well glass type pole mounting type for Ground Level.
98	Flood light fixtures.
99	4-way, junction box.
100	Supply of following FLP/Div.2 lighting fixtures complete with lamps, requisite FLP cable glands, plugs and necessary control gear as per EIL standard specification No. 6-51-0061, data sheet for lighting fixture schedule, including all albour and materials, specifications of this tender and directions of Engineer-in-Charge.
101	Type FLP-LED-1 Fixtures.
102	Type FLP-LED-5 Fixtures.
103	Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer-in-Charge.
104	SAFE AREA LIGHTING FIXTURES
105	Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge.
106	Type LED ST-4 Fixtures.
107	Type LED FD-1 Fixtures.
108	Type LED FD-2 Fixtures.
109	JUNCTION BOXES (OUTDOOR / INDOOR TYPE)
110	Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
111	4 way.
112	LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS
113	Supply, installation, connection, testing and commissioning offlame proof weather proof lighting/power panels(for gas group IIA/IIB) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
114	40 A, 4 pole incomer MCB isolator and RCCB and 6 Nos. outgoingdouble poleMCBs (upto 20 A).
115	Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with completewiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
116	40 A, 4 pole incomer MCB isolator and RCCB and 6 Nos. outgoingsingle poleMCBs (upto 20 A).
117	WIRING
118	Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing),from lighting/powerpanel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
119	3 C x 2.5 sq. mm
120	Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
121	3 C x 2.5 sq. mm
122	EARTH ELECTRODES
123	Supply, Installation, Testing and Commissioning of maintenance free Chemical earth electrode complete with earth pit and all necessary materials including excavation of earth pit, filling with maintenance free chemical for ease of operation and maintenance, back filling, providing necessary brick work, connections, including all labour and materials as per approved drawings, specifications of this tender and directions of engineer-in-charge
124	EARTH STRIPS
125	Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
126	50 x 6 mm
127	40 x 5 mm
128	Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
129	50 x 6 mm
130	EARTHING CONNECTION
131	Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
132	3/8\" dia (10 mm) flexible rope.
133	5/8\" dia (16 mm) flexible rope.
134	8 SWG GI Wire.
135	EARTH PLATES
136	Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
137	GI earth plate as per std. 7-51-0103.
138	LAYING OF COMMUNICATION / FIRE ALARM CABLES
139	Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
140	Cables of overall dia. upto 35 mm.
141	Cables of overall dia. above 35 mm.
142	CIVIL WORKS/M.S. CHEQUERED PLATE
143	Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured).
144	Excavation and backfilling of trenches in all types of soil except rock.
145	Excavation and backfilling of trenches in all types of soil including rock.
146	Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge.
147	Stone dust grading Zone-II, grading limits as per IS-383.
148	Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured).
149	Bricks.
150	Providing and laying plain cement concrete for all depths below and up to a plinth level in foundations including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including supply of all materials and all complete for concrete of M-15 grade with 20 mm and down size graded crushed stone aggregates, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
151	Plain cement concrete.
152	Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
153	6 mm thick M.S. chequered plate.
154	MISCELLANEOUS
155	Supply of 1100V grade Fire survival cables, copper conductor, EPR or equivalent material with glass mica tape and armoured, cables of sizes 3C x 4 sq. mm as per EIL standard specification no. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
156	Supply of 1100V grade Fire survival cables, copper conductor, EPR or equivalent material with glass mica tape and armoured, cables of sizes 3P x 2.5 sq. mm as per EIL standard specification no. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.
157	Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per IEC-60331, specifications of this tender and directions of Engineer-in- Charge. (Actual area of surface painted shall be measured).
158	ELECTRICAL WORKS
159	SUPPLY OF MV CABLES
160	Supply of 1100 V grade, Copper Conductor, PVC insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
161	2 C x 2.5 sq. mm
162	INSTRUMENTATION
163	PRESS.INSTRUMENTS (Incl. supply of Impulse pipe/Tubing material)
164	Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Overrange Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration.
165	In Carbon Steel as per Standard 7-52-0437/0438/1131/1132
166	TEMPERATURE TRANSMITTERS (REMOTE MOUNTED)
167	Thermocouple/ RTD element with thermowell, along with Temperature Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension/RTD cable upto thermocouple, termination of cables at both ends, painting of supports but exclusive of Supply of Instruments, Cable, Yoke and Calibration.
168	Temperature Transmitter with RTD (Skin type)
169	DETECTOR SYSTEMS
170	Installation ofFire andGas detectors/monitors, beacon lights and hooters including earthing ofFire andGas detector, supply of supports but exclusive of Supply of Detectors, Yoke and Calibration.
171	LEL Detectors
172	Beacon Lights
173	Installation of panels / cabinet / consoles
174	Installation of panels / cabinet / consoles inside control room / Satellite rack room with or without instruments of following sizes but exclusive of pneumatic/ electrical connections, supply of panels / cabinet / consoles and installation of base frame and painting of the same.
175	Size < 2200x1200x800mm > 2200x1000x800mm
176	CALIBRATION/ TESTING
177	Cleaning, calibration of the instrumentslisted below including removal of instrumentfromreinstalledlocationslikepanels,enclosures,racks,field etc.,andfixingthembackinrespectiveplaces,providingequipments, necessarytestjig,InstrumentAir,NitrogenCylinders,testreports,all consumable, exceptforspecialimportedtestequipments for electronic instruments to be supplied by owner if available.
178	Pressure transmitters
179	Temperature Transmitters
180	LEL Detectors
181	LOOP CHECKING
182	Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060.
183	Pressure transmitters
184	Temperature Transmitters
185	Gas Detectors
186	Hooter / Beacon
187	Miscellaneous Instruments / Transmitters
188	Pig Signaller (Ultrasonic type)
189	SUPPLY ITEMS
190	Supply of Instrument items as per specifications enclosed elsewhere in the Tender.
191	Floor Mounted type Telemetry Interface Cabinet (TIC) Size 2200 x 800 x 800 mm along with IS barrier, Power supply units termination hardware, duly wired.
192	Portable Calibrator for LEL Detector/Fire Detector
193	Beacon Lights suitable forhazardous area with resetpush button
194	Triad Cableas per Standard Specification 6-52-0046,Size 1T X 1.5 mm2 , IS, FR
195	Triad Cables as per Standard Specification 6-52-0046 Size 8 T X 1.5 mm2, IS, FR, Orange in colour
196	Restriction Orifice Plates
197	Temperature Element(Skin Type RTD)
198	Pressure Transmitter
199	Weatherproof & Flameproof 1.5\" NPT Plugs
200	Weatherproof & Flameproof 1/2\" NPT Plugs
201	Weatherproof & Flameproof 3/4\" NPT Plugs
202	Weatherproof & Flameproof 1\" NPT Plugs
203	LEL Gas Detector
204	Signal Cableas per Standard Specification 6-52-0046 size, 1P X 1.5 mm2, IS, FRLS
205	Signal Cableas per Standard Specification 6-52-0046 size 6P X 1.5 mm2, IS, FRLS
206	Control cables as per Standard Specification 6-52-0046 size 6P X 1.5 mm2 , NIS, FRLS
207	Supply of Temperature Transmitter
208	Supply of Junction boxes of various types and specifications
209	Junction Box, Weatherproof type for 6 Pair Cable
210	Junction Box, Weatherproof+ Flameproof (Gas Groups -IIC) type for 8 Triad Cable
211	Supply of Cable glands ofvarioustypes and specifications
212	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIC) type,Ni plated Brass material with PVC shroud, 1 1/2\" NPTM
213	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIC) type,Ni plated Brass material with PVC shroud, 1\" NPTM
214	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIC) type,Ni plated Brass material with PVC shroud, 1/2\" NPTM
215	Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIC) type,Ni plated Brass material with PVC shroud, 3/4\" NPTM
216	Weatherproof Cable gland,Ni plated Brass material with PVC shroud, 1 1/2 \" ET with check nut
217	Weatherproof Cable gland,Ni plated Brass material with PVC shroud, 1\" ET with check nut
218	JUNCTION BOX INSTALLATION
219	Installation of weatherproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
220	For cable size 6P x 0.5/1.0/1.5/2.5 mm² / 16 AWG Signal/FF/Alarm/ Control
221	Installation of weatherproof and flameproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
222	For cable size 8T x 1.5/ 2.5 mm²RTD/ Gas Detector
223	LAYING OF CABLES
224	Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if requiredthrough IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench.
225	Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm²
226	Signal/ Alarm/ Control Cables of cable sizes 12C / 6P x 1.5/ 2.5 mm²
227	Laying of thermocouple/ RTD/ LEL Detector/ H2S Detector cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs {Instrument Road Crossings}) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/angle tray and preparation of cable trench.
228	1 Triad/ Quad x 1.5 mm² RTD/ LEL Cable
229	8 Triad/ Quad x 1.5 mm² RTD/ LEL Cable
230	Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench
231	For cable size 2C/3C x 2.5 mm²
232	TRENCH WORK
233	Excavation of trenches for burying the cable, preparation of same for laying of cable, filling with sand, laying of brick, back filling and compacting of the excavated earth as per specifications including supply of sand and bricks and as per cable trench layout and removal of surplus earth as per instructions of Engineer- in-Charge.
234	Trench size 500 mm (W) x 700 mm (D)
235	EARTHING
236	Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required.
237	At both ends of earth grid/ Instruments of GI wire (12 AWG) in trays and conduits as required excluding earth-pit preparation and electrode installation.
238	STRUCTURAL
239	Supply and Erection of prefabricated Galvanised Iron perforated trays and its supports including tees, bends and elbows as per drawing.
240	Tray of 100mm (W) X 30mm (H)
241	Tray of 60mm (W) X 20mm (H)
242	GENERAL SITE WORK
243	Supply of Yoke supports for transmitters/ preamplifiers (wherever applicable) including supply, fabrication and erection of instrument yoke of all types and painting of yoke supports but exclusive of mounting of Instrument on supports.
244	2\" Yoke supports as per standard 7-52-0101
245	Supply and installation of Pre-fabricated FRP canopies for local instruments, transmitters, junction box etc.including supports.
246	Sun shields for local panels/ cabinets
247	Identification of instrument items wherever required including supply of approved colour of paint/ paints (Fluorescent), painting of tag number (approx 25-50 mm high) on instrument item like transmitter, switches, level gauges, control valves etc. as specified by Engineer-in-Charge.
248	Identification of instrument items
249	TELECOMMUNICATION WORKS
250	OPTICAL FIBRE CABLE INSTALLATION
251	Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.
252	Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.
253	Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.
254	Supply and installation of Jointing Pit, including sand, OFC joint identification marker, back filling as required etc. all complete
255	Supply and installation of Blowing pits, including sand, backfilling as required etc. all complete
256	Supply and installation of Electronic marker system consisting of:
257	Electronic Marker
258	Marker locator
259	Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.
260	Supply of following Optical Fibre Cables (OFC) including FAT, storage, transportation to site, loading, unloading etc. all complete
261	24 fibres, single mode, compliant to ITU-T G.652 , Optical Fibre Cable
262	Supply of Permanently lubricated HDPE conduit for following sizes in required length of pressure rating 6 kgf/cm2 to be laid in pipeline trench or in separate trench directly or inside CS conduit including FAT, storage, transportation to site, loading, unloading etc. all complete
263	Duct with nominal diameter 40 mm or less
264	Supply, installation, testing and commissioning of fibre-optic patch panel (light interface unit or fibre-termination closure), wall-mounted type in dust tight enclosure with hinged cover, end termination/splicing of fibre-optic cables, including supply & installation of loop box (1000 mm (H) x 1000 mm (W) x 200 mm (D)),patch-cord, pigtail, including all labour and materials all complete for following FO cables
265	FO cable with 17 or more fibres
266	Laying of permanently lubricated HDPE conduit in pipeline trench, testing of laid HDPE conduit, blowing of OFC through the conduit including excavation as required, padding, backfilling, supply and use of all materials required, including warning mats, HDPE conduit, etc. all complete as per specification and direction of CLIENT/CONSULTANT
267	Installation of OFC in pipeline trench or in separate trench directly and through CS/HDPE conduits as required, excavation as required, padding, backfilling etc. Supply and use of all materials required, including warning mats, HDPE conduits, etc. all complete as per specifications provided in the bid document & as per direction of CLIENT/CONSULTANT.
268	Installation and Laying of OFC through permanently Lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)
269	Installation & laying of OFC in separate trench directly or through HDPE/CS conduit by blowing method, trenching and excavation as required, padding, backfilling, restoration of land & other constructions, as applicable to original conditions etc., including supply and use of all materials required like warning mats, couplers, end plugs etc. all complete
270	Supply & installation of OFC route marker (Metallic Marker) on the Optical Fibre Cable laying route inside the terminals as per specifications and direction of CLIENT/CONSULTANT.
271	EQUIPMENT - PACKAGE
272	INSTALLATION OF FIELD ASSEMBLED FREE ISSUE PACKAGES COMPRISING OF KNOCKED DOWN EQUIPMENT: Handling and transportation of Package consisting of single or multiple skids including interconnecting piping between skids from Owner\"s storage point to work site/contractor\"s stores. Assembly of sub-assemblies, placing the equipment on foundations/structures, levelling, aligning, fixing of foundation bolts, providing (including supply) packing/shim plates, chipping and dressing of foundations,grouting (including supply and applications of grout material), cleaning and flushing of equipment with water, draining and drying with compressed air, erection of vendor\"s supplied loose inter- connecting piping including instruments, piping accessories and supports, wherever required. Purging the line with air/gas as per the instruction of Package supplier (wherever applicable), installation of insulation in all respects wherever applicable on equipments and piping as per Vendor drawings, application of touch-up paint (if required) after erection and assembly at site, providing manpower for carrying out pre-commissioning, commissioning and testing under the supervision guidance of Manufacturer\"s/Owner\"spersonnel and rectifying defects, if any and completing the work in all respects as per drawing(s), specifications, scope of work and instructions of engineer in charge for each equipment including drives and accessories listed below :
273	Emergency Evacuation Equipment (EEE) System (3MT weight approx.) at SV-1003.
274	PIPELINES
275	LAYING/ INSTALLATION OF STEEL PIPELINE
276	ROU ManagementROU management of entire pipeline route , during preconstruction survey, opening of ROU and maintenance of ROU upto completion of entire Mainline works (including CP and Telecom works); all type of liasoning/coordination with local people/villagers, farmers, land owners or any other person/ institution etc. directly or indirectly linked with the pipeline/affected by the pipeline laying activities for ensuring hindrance-free construction works at site; obtaining NOC from respective land owner(s), farmers etc. as and when required; Liasoning/Coordination and obtaining work permits, NOC from various statutory authorities having jurisdiction for execution of the crossings and complying with all stipulations/ conditions/ recommendations of the said authorities.
277	Laying/ Installation of line pipe, associated fittings and accessories, etc. as per specifications, standards, drawings, other provisions of Contract and Instructions of Engineer-in-Charge, including but not limited to carrying out the following: \"Receiving and taking-over\", safe handling, loading, transportation and unloading of Owner supplied Free Issue Materials (as applicable) from designated place(s) of issue/ dump site(s) to Contractor\"s own stock-yard(s) including stringing the pipeline in Standard Right-of-Use (ROU) / Right of Way (ROW), Arrangement of all additional land required for Contractor\"s storage, fabrication, access for construction (other than Owner provided ROU); supply of all materials (except Owner supplied materials, as applicable), consumables, equipment, labour, etc; Staking and installation of construction markers, clearing, grubbing, grading (as required) of Standard Right-of-Use (ROU) / Right of Way (ROW); Cutting Trees, if required; Counting the number and type of trees cut in presence of DFO/ concerned authorities and keeping record thereof; Trenching to all depths and to a width to accommodate the pipeline with/ without optical fiber cable/cable conduit as specified in Scope Document by excavation in all types of soil/ strata (including Normal Strata/ Hard Strata/ Hard Rock, as defined subsequently) & terrain(s), including additional trenching for seismic and other areas as specified, blasting, chiseling or otherwise cutting etc.; Providing Warning Devices (Mat/ Tape or Mesh), as required; Providing trench padding as required with sand/ graded earth approved by Engineer-in-Charge; Carrying out repairs of pipe and coating defects not attributable to Owner;Thorough internal cleaning of all pipes by suitable methods to remove debris, shots, grits etc.; Stringing of line pipes along Standard ROU/ ROW including providing straw bags, soft padding/sand padding; Aligning, bending, cutting and beveling (as required) of pipes for welding and field adjustments, NDT of re-beveled area, welding, carrying out destructive & non- destructive testing of welds required as per approved NDT specifications (including radiography) and providing all requisite equipment, labour, supervision, materials, films, consumables etc.; carrying out repairs of weld joints as required, carrying out re- radiography and other non-destructive tests on repaired joints, etc.; Installation of carrier pipe including concrete coated pipes (whereverrequired) at all crossings including roads/ canals/ nala/ water crossings etc. (except at crossings those are specifically covered separately in this SOR) by open cut or Jacking/ boring method including pre-testing as required; Carrying out installation of carrier pipe in the casing pipe at cased crossings (excluding supply and installation of casing pipes, covered separately); Coating of all field weld joints, long radius bends, buried fittings etc.(as applicable); Lowering the pipelines in trench including providing sand bag separators for parallel pipelines at the specified spacing (when applicable), adhering to all safety norms implied by the ROU/ ROW authority (as applicable), providing required padding over and around the pipeline with sand/graded material approved by Engineer-In-Charge (in rocky areas), backfilling with available approved excavated material and/or other suitable soil approved by Engineer-In-Charge; Supply and installation of slope breaker as per specifications and drawings in steep slope areas, wherever required; Carrying out hydrostatic testing including air cleaning, flushing, filling, gauging, pressurization of complete pipeline in various test sections as approved by Engineer-In-Charge to the specified test pressure, providing all equipment, pumps, fittings, instruments, dead weight tester, all types of pigs etc., and services, supervision, labour, consumables, arranging adequate quantity of water of suitable quality required for hydrostatic testing including supply of corrosion inhibitor, air, etc. as required, locating of leaks and rectification of defects attributable to Contractor, re-testing after rectification, successful completion of hydro-testing of pipeline (Controlled De-watering etc. covered elsewhere in the SOR); including all tie-in(s) with the pipeline/ piping installed by others including cutting of test header, re- beveling as required; Carrying out all temporary, ancillary, auxiliary works and all incidental works required to make the pipeline ready for pre-commissioning; Repair of defects recorded during EGP/gauge plate run or otherwise including cutting, beveling, welding, NDT (including Radiography/ X Ray check shots, as applicable), field joint coating etc. as applicable; Final clean-up and restoration of right of use/ right of way including obtaining work permits/ NOC from respective statutory authorities as required and disposal of debris and returning all surplus material to designated disposal areas/ Company storage yard, as directed by Engineer-In-Charge; Restoration of land, facilities and boundary wall etc. at associated facilities dismantled/damaged by the Contractor during construction; Obtaining work permits/ NOC from various statutory authorities having jurisdiction and complying with all stipulation/conditions/recommendation of the said authorities;Preparation of As-Built drawings, pipe-book and other records. SOR shall be read in conjunction with drawings, scope of work, specifications, standards and other provisions of contract document. All above works for buried pipeline as per following details:
278	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) OFC Conduit to be installed Yes (PL SOR includes trenching works only. OFC works as per Other Department SOR) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of External Coating 3LPE Type of Internal Coating Epoxy Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Type of Terrain Generally Flat Wall Thickness 6.5 mm
279	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) OFC Conduit to be installed Yes (PL SOR includes trenching works only. OFC works as per Other Department SOR) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of External Coating 3LPE Type of Internal Coating Epoxy Type of Soil/Strata Hard Rock Type of Terrain Generally Flat Wall Thickness 6.5 mm
280	LR BEND INTERNAL COATINGInternal Coating of LR Bends as per Job Specification no. B378-200-83-41-SP-0078 (Job Specification for Internal Coating of Line pipes).Pipe Size- 12.75 Inch
281	BACKFILLING WITH SELECT SOIL
282	Unit rate over and above item no. 01PP.1.1.1/ 01PP.2.1.1 (as applicable) for supply of specified and approved quality of sand (for station approaches) or approved quality of cohesion-less soil as backfill material like graded sand, morrum, silty sand etc. (for seismic zones along pipeline route) including supply of sand or approved quality of backfill material like graded sand /other types of soil etc. in place of available excavated material and/ or other suitable soil as per applicable standards/ specifications, including backfilling of excavated trench for specified length after laying of pipeline and optical fiber cables/ cable conduit, including transportation of backfill material over all distances and disposal of surplus excavated soil. All work shall be executed as per following details:
283	Type of Backfill Station Approach Pipe OD 323.9 mmDistance of Transport Not Applicable
284	ANTI-BUOYANCY MEASURES FOR PIPELINE
285	Unit rate for additional work over and above item no. 01PP.1.1.1/ 01PP.2.1.1 (as applicable) for supply of all consumables and materials and application of continuous concrete weight coating on pipes of all wall thicknesses except weld joints and/or design, manufacture and supply of Non-biodegradable geo-textile bags and installation of geo-textile bags duly filled with gravel/ stone ballast on pipelines of all thicknesses as mentioned below and/or supply of all consumables and materials including supply of 3 mm thick HDPE sheets, fabrication and installation of concrete saddle weights on pipelines of all wall thicknesses as mentioned below in all areas of work except waterbody crossings covered separately, and performing all works as per scope of work, specifications, standards and instructions of Engineer-in-Charge and other provisions of Contract document. All work shall be executed as per following details:
286	Type of Protection Geo-textile Bags Pipe OD 323.9 mmConcrete Weight Thickness Not Applicable (for Geo-textile/Concrete Saddle) mm
287	Type of Protection Concrete Weight Coating Pipe OD 323.9 mmConcrete Weight Thickness 40 mm
288	SOIL STABILIZATION
289	Unit rate for additional works over and above item no. 01PP.1.1.1/ 01PP.2.1.1 (as applicable) for supply, fabrication and installation for protection and stabilization of banks of water crossings or stabilization of soil in hilly areas including supply of all materials, equipment, consumables, manpower and performing works as per drawings, scope of work, specifications, standards and any additional provision specific to job requirements as per instructions of Engineer-in-Charge and provisions of Contract. All work shall be executed as per following details:
290	Works Related to Bank Stabilization
291	ROCK SHIELDING IN ROCKY AREAS
292	All works for Supply and installation of Rock Shield mesh around pipeline in rocky areas as per scope of work, provisions of Contract document and as per instructions of Engineer-in-charge
293	Pipe OD 323.9 mm
294	INSTALLATION OF CASING PIPE & CS CONDUIT
295	Installation of Casing pipe & CS Conduit for OFC (Including/ Excluding supply of casing pipe as defined in below & refer SOW for further details) by jacking/ boring or open cut for rail, road, drain, nala or canal crossings wherever required (as defined in SOW) (including 500µm of Epoxy coating on Casing Pipes, vent & drain pipes and CS Conduit as required) in all types of soil/ strata (including Normal Strata/ Hard Strata/ Hard Rock, as defined subsequently) & terrain(s) separately for carrier pipes and fiber optic cable/cable conduit, supply of all other Contractor supplied materials viz. casing insulators and casing end seals, materials for casing vents and drain assemblies etc., including transportation, supply of all other materials, equipment, consumables, man-power, welding including visual inspection of all weld joints, installation of casing insulators, end seals, vents and drain- off pipes, backfilling and restoration as original of the facility crossed and performing all works as per drawings, scope of work, specifications, standards and instructions of Engineer-in-Charge and provisions of Contract document.
296	Scope of Work Supply & Installation of CS Conduit Pipe OD 168.3 mmMaterial Grade API 5L Gr. B/ IS 3589 Grade Fe 410/ IS 3589 Grade Fe 450 Method of Crossing Open Cut Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Thickness 6.40 mm
297	INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING)
298	Complete work for all type of crossings (RIVER/CANAL/ DRAIN/ NALA/ ROAD/ RAILWAY/ UTILITY) (between the limits as indicated in the drawing/ Scope of work) in all types of soil/ strata (including Normal Strata/ Hard Strata/ Hard Rock, as defined subsequently) including all additional drilled lengths necessitated by Contractor\"s design and based on site conditions, carrying out geo-technical investigation, carrying out topographical and hydrological survey and collection of data to establish the bed of the water body (for River/ Unlined waterbody); calculation of scour depth of water body crossings (for River/ Unlined Waterbody), including construction design calculation andengineering of the crossing for all types of crossings, \"Receiving and taking-over\", handling, loading, transportation and unloading of externally corrosion coated/ bare line pipes (as applicable) from designated place(s) of issue/ dump site(s) to Contractor\"s own stock-yard(s)/ work site; mobilization and de- mobilization at site(s), supply of all materials as per\"ScopeofSupply\" all consumables, equipment, manpower, other resources, temporary acquisition of additional land as required for string preparations/ all other works, andexecutionof,but notlimitedto, the followingworksinaccordancewithspecifications, drawings; preparationofallnecessaryconstruction drawings for Owner\"s approval,Preparation of detailed construction method statement, calculations and installation procedures, Strings preparation including welding, NDT of welds and re-beveled areas, radiography,weldrepairandre-test,pre-hydro testing of completed string, corrosion coatingof fieldjoints withHDD sleeves, inspection of corrosion coating and repair of defects, installation of pipeline string by Horizontal directional drilling, Supply & Installation of 168.3mm size, 6.4 mm thk., API 5L Gr. B/ IS 3589 Fe 410 CSconduit for OFC (including 500µm of epoxy coating on CS Conduit as required) below thelowest level of the crossing including cover byseparate horizontaldirectional drilling to thecorrectprofileas per approved drawings and specification, Post-installationhydrotest including leaks and repair of defectsand retesting, etc. for defects attributed to Contractor\"s faulty work, safe disposal of corrosion Inhibited water and bentonite, Supply, fabrication and construction of protective fencing as required; supply, fabrication and erection of pipeline markers; Restoration and clean-up etc., Preparation of as-built drawings and other records etc. All other works not specifically listed herein, but required as per drawings, scope of work, specifications, standards and provision of contract document, calculations, and instruction of Engineer-in- Charge, leading to successful completion of works. Notes: 1. Length of HDD shall be measured as actual curvilinear length between tie-ins at entry and exit.2. Payment shall be made on pro rata basis for any Increase/ decrease in HDD length.
299	Miscellaneous HDDAny Crossings (Waterbody/Road/River etc.) which are not in list of HDD crossings, However due to site constraints and execution difficulties may be executed via HDD as per Instruction of Engineer-in-charge. All works as per Item no. 01PP.9.1 above,Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mm Type of Crossing Waterbody/Road/Rail/ Any otherType of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) or Hard Strata Crossing Name Miscellaneous Chainage of Crossing NA Pipe Wall Thickness 6.5 mm.
300	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangroves Chainage of Crossing 16.172 kmPipe Wall Thickness 6.5 mm
301	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangrove, Nala - CRZ Chainage of Crossing 17.27 kmPipe Wall Thickness 6.5 mm
302	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangrove, Nala - CRZ Chainage of Crossing 19.77 kmPipe Wall Thickness 6.5 mm
303	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangrove+Nala - CRZ Chainage of Crossing 21.65 kmPipe Wall Thickness 6.5 mm
304	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Nala+Mangrove - CRZ Chainage of Crossing 23.512 kmPipe Wall Thickness 6.5 mm
305	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Nala+Mangrove & Nala+Mangrove Chainage of Crossing 24.5 kmPipe Wall Thickness 6.5 mm
306	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Nala+Mangrove - CRZ Chainage of Crossing 25.536 kmPipe Wall Thickness 6.5 mm
307	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Nala+Mangrove - CRZ Chainage of Crossing 25.536 kmPipe Wall Thickness 6.5 mm
308	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Nala+Mangrove Chainage of Crossing 27.784 kmPipe Wall Thickness 6.5 mm
309	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Road+Nala+Mangrove - CRZ Chainage of Crossing 27.408 kmPipe Wall Thickness 6.5 mm
310	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Creek Chainage of Crossing 14.129 kmPipe Wall Thickness 6.5 mm
311	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Patalganga River Chainage of Crossing 15.143 kmPipe Wall Thickness 6.5 mm
312	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Bhogeshwari River Chainage of Crossing 20.696 kmPipe Wall Thickness 6.5 mm
313	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangroves & Nala Chainage of Crossing 23.85 kmPipe Wall Thickness 6.5 mm
314	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmType of Crossing Waterbody Type of Soil/Strata Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.) Crossing Name Mangrove+Nala+Road+Mangrove Chainage of Crossing 17.6 kmPipe Wall Thickness 6.5 mm
315	INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING SHALLOW HDD)
316	Complete work for crossings by shallow Horizontal Directional Drilling method in accordance with specifications, drawings and as per approved Horizontal Directional Drilling Design & Methodology, in concurrence with Site/ Owner siting valid reasons for opting Shallow HDD instead of open cut/ boring as defined in Design Basis, Scope of Work, Drawings etc. Installation of coated pipeline across canal/ drain/ road/ other crossings by shallow horizontal directional drilling method in Normal Strata (Soft Soil/ Sand/ Clay/ Silty Sand/ Silty Clay etc.), including all additional drilled lengths necessitated by Contractor\"s engineering, design & based on site conditions; Mobilization and demobilization; Trial pit(s) for underground utility identification, Preparation of ramps and temporary launching and receiving pit(s) at entry & exit side of rig & restoration of the same after completion of work, Engineering, Preparation of crossing drawings and detailed construction method statement; supply of all materials as per \"Contractor\"s Scope of Supply, all consumables, equipment, machinery, manpower and other resources; acquiring all additional land required for Contractor\"s storage, fabrication & construction; Carrying out inspection and repairs including supply of all repair materials; Handling, transportation and unloading of Company supplied coated line pipes; Preparation of string including welding, NDT of welds and re-beveled areas, radiography, weld repair and re-test, pre-post hydro-testing of completed string; Cutting of pipes, if required; including NDT of cut ends, Installation of pipeline and HDPE duct pipe as required by shallow horizontal directional drilling to the specified depth as per approved methodology; Disposal of corrosion inhibited water & bentonite as directed by Engineer In charge; Restoration and clean-up etc.; Preparation of as-built drawings, documents and other records etc.; Obtaining NOCs from relevant authorities & owners; Obtaining approval from Company for the design, engineering, calculations, drawings & documents; Carrying out all works in accordance with Scope of Work/ Standard/ Job specifications, drawings, in compliance to statutory authorities requirement & all provisions of the tender document and as per instructions of Company/ Engineer-In-charge.
317	Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-52 PSL 2 Pipe OD 323.9 mmPipe Wall thickness 6.5 mm
318	PERMANENT MARKERS
319	Supply, fabrication and installation of following types of permanent markers along the route including allassociated civil works such as excavation in all types of soil, construction of pedestals and grouting withconcrete, clearing, supply and application of approved color & text and quality of primer and paint, stencil letter cutting for numbers, direction, chainage etc., restoration of area to original condition and performing all works as per drawings, scope of work, specifications, standards and instructions of Engineer-in-Charge. Note: The painting of all markers shall conform to environments specified as per scope of work and protective coating specification.
320	Type of Marker Aerial Marker
321	Type of Marker Direction Marker
322	Type of Marker Kilometer Marker
323	Type of Marker Navigable Waterway Marker
324	Type of Marker Pipeline Warning Marker
325	Type of Marker ROU Boundary Marker
326	FABRICATION OF LR BENDS
327	Transportation of Company supplied free issue or Contractor procured bare line pipes to fabrication shop, fabrication of long radius bends, testing and transportation to worksite(s)/workshop(s) including loading, unloading and handling as per Scope of work and other provisions of the Contract as per the following details
328	Pipe OD 323.9 mmAngle of Bend 0 to 15 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
329	Pipe OD 323.9 mmAngle of Bend 16 to 30 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
330	Pipe OD 323.9 mmAngle of Bend 31 to 45 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
331	Pipe OD 323.9 mmAngle of Bend 46 to 60 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
332	Pipe OD 323.9 mmAngle of Bend 61 to 75 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
333	Pipe OD 323.9 mmAngle of Bend 76 to 90 °Radius of Bend R=6D Pipe Material API 5L Gr. X-52 PSL 2 Wall thickness of Mother Pipe 7.5 mm
334	REPAIR OF DEFECTS (ATTRIBUTABLE TO OWNER)
335	Repair of defects in Pipes/ Line Pipes Repair of defects in pipes/ line pipes (by Cutting and re-beveling including NDT of re-beveled area or by Jack out) of all thicknesses and external coating noted at the time of taking delivery by Contractor, including performing all works as per specifications, scope of work, standards and directions of Engineer-In-Charge, supply of all repair material and inspection.
336	Type of Repair by Cutting and re-beveling including NDT (for dent exceeding 3mm in depth) Pipe OD 323.9 mm
337	Type of Repair by Jack out for dents in bevels (for dent between 1 mm and 3 mm in depth) Pipe OD 323.9 mm
338	Repair of Holiday/ Cosmetic defects in CoatingSupply of all coating repair materials as per the requirements of the relevant specifications, supply of all consumables, utilities, equipment, and all manpower required, pipe cleaning and surface preparation, repairing of coating defects (resulting in holiday in coating) and testing including all handling, transportation, etc. for line pipes, performing all works necessary for the completion of the works strictly in accordance with the relevant specifications and instructions of Engineer-in-Charge. This rate shall be applicable per sq. cm of the exposed steel area and/ or damaged coating area, as applicable.
339	Type of Repair Repair of Cosmetic defects Type of Coating 3LPE
340	Type of Repair Repair of Holiday Type of Coating 3LPE
341	LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER)
342	Repair of Leaks/ Bursts in PipelineAll works for locating any major leak/burst (occurred during hydrostatic testing) or any minor leak by sectionalizing or any other methods which cannot be located by visual means, including necessary repairing/ replacing defective pipe length, including cutting and removing out defective pipes, transportation, pretesting of replacement pipe and welding into mainline, NDT of welds and re-beveled area, repair and re-testing of defective welds, coating/ painting of welded joints, clean-up, retesting the pipeline/ pipe segment including providing all necessary equipment, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, scope of work, specifications, standards enclosed with the Contract and directions of Engineer-in-Charge. Note: 1. This rate is applicable for manufacturing defects in Company/ Owner supplied material only.
343	Type of Leak Major Leak (detected by visual method) Pipe OD 323.9 mm
344	Type of Leak Minor Leak (detected by sectionalizing) Pipe OD 323.9 mm
345	Repair of Leak/ Burst in Terminal PipingAll works for repair of leak/burst (occurred during hydrostatic testing) by necessary repairing/ replacing defective pipes/ fittings/ flanges etc., including cutting and removing out defective items, transportation, welding, NDT of welds and re-beveled area, repair and re-testing of defective welds, coating/ painting of welded joints, clean-up, retesting the pipe segment including providing all necessary equipment, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, scope of work, specifications, standards enclosed with the Contract and directions of Engineer-in-Charge. Note: 1. This rate is applicable for manufacturing defects in Company/ Owner supplied material only.
346	IDLE TIME PRESERVATION WORKS
347	Idle time preservation of Pipeline and Associated facilities: Preservation of complete pipeline and associated facilities and its maintenance by filling and pressurizing with nitrogen including supply and maintenance of nitrogen or by filling and pressurizing with corrosion inhibited water including supply and maintenance of water with regular dosing of inhibitor to maintain the effectiveness of the inhibitor water (along with disposal of corrosion inhibited water at a proper/ suitable location, after due preservation works) and supply of all consumables, all equipment, man- power, etc., complete as per the requirements of specifications, scope of work, standards, other provisions of Contract document and instructions of Engineer-in- Charge as per following details:
348	Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 323.9 mmPeriod Up to 3 Month
349	Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 323.9 mmPeriod 3 to 6 Month
350	Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 323.9 mmPeriod Up to 3 Month
351	Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 323.9 mmPeriod 3 to 6 Month
352	PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES
353	Carrying out pre-commissioning activities and pre-commissioning checks to the specified acceptance criteria, making the entire pipeline system including stations ready for commissioning, providing assistance during the complete duration of commissioning operations, supply of all equipment, man-power, consumables, including all type of pigs and required quantity of nitrogen (if & as required), materials for all temporary works and performing all associated works, complete as per the relevant specifications, scope of work, standards, other provisions of Contract document and instructions of Engineer-in-Charge
354	Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 323.9 mm
355	Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 323.9 mm
356	Pre-Commissioning Works as per details: Type of Activity Drying Pipe OD 323.9 mm
357	Pre-Commissioning Works as per details: Type of Activity Inertisation by Nitrogen Pipe OD 323.9 mm
358	Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 323.9 mm
359	PIPELINE INFORMATION MANAGEMENT SYSTEM
360	Execution of all works for Pipeline Information Management System as defined in Scope of Work & specification(s) enclosed with the tender document.
361	PIPING WORKS IN DESPATCH/ RECEIPT/ INTERMEDIATE PUMPING/ COMPRESSOR/ INTERMEDIATE PIGGING/ SV/ SLV/ BLOCK VALVE/ TAP OFF STATIONS
362	Installation of Sectionalizing Valve (Ball Valve) as below: Installation Buried End Type Butt Welded Operation Electro Hydraulic Actuated Size 323.9 mm Rating 300#
363	FABRICATION, ERECTION, INSTALLATION AND TESTING OF PIPING
364	All works for installation of all above ground terminal/ station piping at all elevations and below ground at all depths for DT/ RT/ IP/ IPS/ Compressor/ Sectionalizing Valve Station(s)/Station Block Valves/Tap off/Station limit valve (SLV)/ In Stations including tapping(s) inside terminals/ station as indicated in Scope document, in all type of terrain and soil including receiving and taking over of all Owner supplied materials from Owner\"s designated place(s) of issue, transportation including loading, unloading, handling from Owner\"s designated place(s) of issue to Contractor\"s owned/ hired stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR) equipment, consumables etc. as defined in Contractor\"s scope of supply, andtheirtransportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation, (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven/ different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead racks and at all other elevations; hook-up with equipment nozzles; installation and supporting of all type of valves up to size of 1.5\" NB, all types of inline/ online instruments such as pressure/thermal safety valves(other than those covered separately in subsequent SOR), fittings of all sizes i.e. flow tees, insulating joints, blow down type QOEC, LR Bends, Pig Signalers, elbows, reducers, tees, \"O\" lets, flanges, blind flanges, spectacle blinds, spacers and blinds, tappings for pressure instruments, thermo wells, hoses and hose couplings of all sizes, as applicable, sample connections, flame arrestors as applicable, vents and drains required for process and hydro-testing purposes etc.; fixing of all types of gaskets (including gaskets for RJ flanges), stud bolts and nuts, jack screw etc. of all sizes including torque tightening as applicable; Carrying out all temporary, ancillary & auxiliary piping works; fabrication of strainers of sizes up to 1.5” NB; carrying out non-destructive testing (excluding specific radiography works covered subsequently in SOR) including radiography, magnetic particle/ liquid penetration etc. as required; hook-up with existing piping/pipeline installed by others as per drawings wherever required; weld repairs/retesting; cleaning and flushing by water/ compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurizing, dewatering, drying by compressed air if applicable; pre-commissioning and providing commissioning assistance for process piping and commissioning of non-process piping, if applicable; cutting of mainline/ pipeline/ terminal piping and beveling (if required), tie-in of valve assembly, including NDT of tie-in joints; excavation and filling in all types of soil including soft/hard rock for installation of piping/pipe supports; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner\"s designated place(s); completing all works in all respects as per the IFC drawings, scope of work, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge.1. This work is exclusive of all works associated with main pipeline covered above.2. Installation of valves/ equipment etc. of size 2\" NB and above will be paid separately as per items covered herein subsequently.3. All works for piping supports will be paid separately as per items covered herein subsequently. 4. All others works pertaining to the Station (Architecture/ Civil/ Structural/ Electrical/ Instrumentation works etc.) shall be as per rates indicated elsewhere in the tender document.
365	Pipe OD 60.3 mmPipe Material Grade ASTM A 333 Gr. 6 Installation Above Ground Wall thickness (mm)/ Schedule 5.54
366	Pipe OD 114.3 mmPipe Material Grade ASTM A 333 Gr. 6 Installation Above Ground Wall thickness (mm)/ Schedule 6.02
367	INSTALLATION OF VALVES/FLOW METERS/ STRAINERS/ SCRAPER TRAPS/ EQUIPMENT/ SKIDS
368	Receiving and taking over of all Owner supplied/ Free Issued materials, equipment including skids from Owner\"s designated place(s) of issue, transportation including loading, unloading, handling from Owner\"s designated place(s) of issue to Contractor\"s owned/ hired stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor\"s scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, scraper traps including QOEC, equipment, skids etc., supply and fixing of gaskets, stud bolts, nuts of all sizes including torque tightening as applicable, leveling, aligning, installation and assembly of accessories, including accessories for actuators, making electrical/ pneumatic connections for such actuators, if any, by bolting/threading or welding of pipes at all elevations, hook up works with others facilities as necessary as per P&ID, testing, completing all works in all respects as per drawings, scope of work, specifications, standards, other provisions of Contract and directions of the Engineer-in-Charge. For all Instrumentation items, details/ specifications/ datasheets are covered elsewhere in the tender document.
369	Installation of Valve (Ball/ Plug/ Gate/ Globe/ Check/ PCV/FCV/SDV/Butterfly) as below: Installation Above Ground End Type Flanged Operation Manual Size 60.3 mmRating 300#
370	Installation of Valve (Ball/ Plug/ Gate/ Globe/ Check/ PCV/FCV/SDV/Butterfly) as below: Installation Above Ground End Type Flanged Operation Manual Size 114.3 mmRating 300#
371	Installation of Valve (Ball/ Plug/ Gate/ Globe/ Check/ PCV/FCV/SDV/Butterfly) as below: Installation Above Ground End Type Butt Welded Operation Manual Size 114.3 mmRating 300#
372	Installation of Valve (Ball/ Plug/ Gate/ Globe/ Check/ PCV/FCV/SDV/Butterfly) as below: Installation Above Ground End Type Butt Welded Operation Manual Size 60.3 mmRating 300#
373	Installation of Valve (Ball/ Plug/ Gate/ Globe/ Check/ PCV/FCV/SDV/Butterfly) as below: Installation Buried End Type Butt Welded Operation Actuated (MOV) Size 323.9 mmRating 300#
374	RADIOGRAPHY WORKS
375	Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. All works shall be done as per details below:
376	Pipe OD 114.3 mm
377	Pipe OD 60.3 mm
378	Pipe OD 26.7 mm
379	PAINTING WORKS
380	Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for Industrial/ Industrial Marine environment for above ground piping including valves & fittings as defined in contract document and as per standard specification for Surface preparation and protective coating, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work inall respect as per Standard/ Job Specification, Drawings, Standards and instruction of Engineer-in-Charge. All works shall be done as per details below
381	Pipe OD 60.3 mmPainting Environment Industrial Marine
382	Pipe OD 114.3 mmPainting Environment Industrial Marine
383	PIPE SUPPORT WORKS
384	Supply of all materials required for fabrication of pipe supports & special supports including supply of bolts, nuts, washers, U Clamps, Wooden Blocks, Teflon Pads, SS Plates (as required) etc. as mentioned in the drawing/ standards and as defined in scope of work document, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works, supply and application of paints and primers suitable for painting environment as defined in contract document and as per standard specification for Surface preparation and protective coating and completing the work as per drawings, scope of work, specifications, standards, other provisions of Contract and instruction of Engineer-in-Charge.
385	CS Structural Steel
386	SUPPLY OF ASSORTED PIPES
387	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Assorted Pipes to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of pipes as per EIL Specification No. 6-44-0051 (Technical notes for Pipes) & its addendum (if any), PMS & any other information forming the tender document as per the following details:
388	Make SMLS Standard ASME B 36.10 Ends Bevel Ended - ASTM Pipe Material Grade ASTM A 106 Gr. B (CHARPY) Pipe OD 60.3 mmWall thickness (mm) / Schedule 5.54
389	Make SMLS Standard ASME B 36.10 Ends Plain Ended - ASME Pipe Material Grade ASTM A 333 Gr. 6 Pipe OD 26.7 mmWall thickness (mm) / Schedule S160
390	SUPPLY OF FLANGES
391	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Flanges to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of flanges as per EIL Specification No. 6-71-0023, 6-71-0024, 6-44-0053 (Technical Notes for Flanges) & its addendum (if any), PMS & any other information forming the tender document, as per the following details:
392	Flanges for Piping (PMS) Type Socket Welded (SW) Face Raised Face(RF) Standard ASME B 16.5 Finish (AARH) 125-250 Rating 300# Material ASTM A 350 Gr. LF2 Cl. 1 Pipe OD 26.7 mmWall thickness (mm)/ Schedule S160
393	Flanges for Piping (PMS) Type Weld neck (WN) Face Raised Face(RF) Standard ASME B 16.5 Finish (AARH) 125-250 Rating 150# Material ASTM A 350 Gr. LF2 Cl. 1 Pipe OD 26.7 mmWall thickness (mm)/ Schedule S160
394	SUPPLY OF FITTINGS
395	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Fittings to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of fittings as per EIL Specification No. 6-71-0023, 6-71-0024, 6-44-0054 (Technical Notes for Fittings) & its addendum (if any), PMS & any other information forming the tender document, as per the following details:
396	Type ELBOW 90 DEG Ends/ Rating Butt Welded / Not Required Standard ASME B 16.9 Material ASTM A 420 GR.WPL6 (CHARPY) OD1 60.3 mmWall thickness (mm)/ Schedule 1 XS OD2 NA mmWall thickness (mm)/ Schedule 2 NA
397	Type ELBOW 90 DEG Ends/ Rating Socket Welded / 6000# Standard ASME B 16.11 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 26.7 mmWall thickness (mm)/ Schedule 1 NA OD2 NA mmWall thickness (mm)/ Schedule 2 NA
398	Type ELBOW 90 DEG Ends/ Rating Socket Welded / 3000# Standard ASME B 16.11 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 48.3 mmWall thickness (mm)/ Schedule 1 NA OD2 NA mmWall thickness (mm)/ Schedule 2 NA
399	Type FULL COUPLING Ends/ Rating Socket Welded / 6000# Standard ASME B 16.11 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 26.7 mmWall thickness (mm)/ Schedule 1 NA OD2 NA mmWall thickness (mm)/ Schedule 2 NA
400	Type SOCKOLET Ends/ Rating Socket Welded / 6000# Standard MSS SP97 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 114.3 mmWall thickness (mm)/ Schedule 1 NA OD2 26.7 mmWall thickness (mm)/ Schedule 2 NA
401	Type EQUAL TEE Ends/ Rating Socket Welded / 6000# Standard ASME B 16.11 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 26.7 mmWall thickness (mm)/ Schedule 1 NA OD2 NA mmWall thickness (mm)/ Schedule 2 NA
402	Type CAP Ends/ Rating Socket Welded / 6000# Standard ASME B 16.11 Material ASTM A 350 Gr. LF2 Cl. 1 OD1 26.7 mmWall thickness (mm)/ Schedule 1 NA OD2 NA mmWall thickness (mm)/ Schedule 2 NA
403	SUPPLY OF VALVES
404	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Valves to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of valves (including commissioning spares (as applicable)) as per EIL Specification No. 6-71-0014 (Specification for Ball Valves), 6-71-0016 (Specification for Plug Valves), 6-71-0017 (Specification for Check Valves), 6-44-0052 (Technical notes for valves) & their addendum (if any), Job Specifications, Datasheets, VMS, PMS & any other information forming the tender document, as per the following details
405	Type Gate Valve Ends Socket Welded Standard BS EN 15761 Rating 800# Operation Manual Installation Above Ground LOCK OPENSize 26.7 mmDatasheet No. 51003
406	Type Globe Valve Ends Socket Welded Standard BS EN 15761 Rating 800# Operation Manual Installation Above Ground Size 26.7 mmDatasheet No. 52003
407	Type Globe Valve Ends Socket Welded Standard BS EN 15761 Rating 800# Operation Manual Installation Above Ground Size 21.3 mmDatasheet No. 52003
408	Type Ball Valve Ends Flanged Standard BS EN 17292 Rating 300# Operation Manual Installation Above Ground Size 26.7 mmDatasheet No. 54403
409	SUPPLY OF GASKETS
410	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Gaskets to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of Gaskets as per EIL Specification no. 6-44-0056 (Technical Notes for Gaskets), PMS & any other information forming part of the tender document, as per the following details:
411	Type Spiral Wound Standard ASME B 16.5 & ASME B 16.20 Material Spiral Wound SS 316 + GRAFIL + Internal Ring Size 26.7 mmRating 300#
412	Type Spiral Wound Standard ASME B 16.5 & ASME B 16.20 Material Spiral Wound SS 316 + GRAFIL + Internal Ring Size 60.3 mmRating 300#
413	Type Spiral Wound Standard ASME B 16.5 & ASME B 16.20 Material Spiral Wound SS 316 + GRAFIL + Internal Ring Size 114.3 mmRating 300#
414	SUPPLY OF FASTENERS
415	Supply, procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for Fasteners to be supplied by Contractor as per the requirement of PMS, data-sheets, scope of work, specifications and applicable addendum (if any), standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. Supply of Fasteners as per EIL Specification no. 6-44-0057 (Technical Notes for Fasteners), ASME B 18.2, PMS & any other information forming part of the tender document, as per the following details:
416	Type Bolt Stud with 2 Nuts Bolt/ Jack Screw Material ASTM A 320 Gr.L7 Nut Material ASTM A194 Gr.4 Coating HDG Bolt Diameter 0.500 InchBolt Length 2.50 Inch
417	Type Bolt Stud with 2 Nuts Bolt/ Jack Screw Material ASTM A 320 Gr.L7 Nut Material ASTM A194 Gr.4 Coating HDG Bolt Diameter 0.625 InchBolt Length 4.00 Inch
418	Type Bolt Stud with 2 Nuts Bolt/ Jack Screw Material ASTM A 320 Gr.L7 Nut Material ASTM A194 Gr.4 Coating HDG Bolt Diameter 0.750 InchBolt Length 5.25 Inch
419	Type Bolt Stud with 2 Nuts Bolt/ Jack Screw Material ASTM A 320 Gr.L7 Nut Material ASTM A194 Gr.4 Coating HDG Bolt Diameter 0.625 InchBolt Length 3.00 Inch
420	VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES
421	Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.
422	Applicable GST Rate for above SOR items

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents
11	Click here to download tender document	Tender Documents
12	Click here to download tender document	Tender Documents
13	Click here to download tender document	Tender Documents
14	Click here to download tender document	Tender Documents
15	Click here to download tender document	Tender Documents
16	Click here to download tender document	Tender Documents
17	Click here to download tender document	Tender Documents
18	Click here to download tender document	Tender Documents
19	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Pipe Line Project Tenders

Pipe Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Balance Pipeline Laying Works Including Hdd Works For Uran Usar Pipeline Project, Raigad-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Balance Pipeline Laying Works Including Hdd Works For Uran Usar Pipeline Project, Raigad-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us