|
| 1 | Dismantlingof floor tiles at any floor of thebuilding, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 2 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. |
| 3 | Dismantling glazed tiles (to be carefully removed). |
| 4 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish /Highlighter /emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Dismantling Sanitary fixtures such asEurpoean /Indian /Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.(a) Eurpoean /Indian/Orissa W.C |
| 6 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.(b) PVC / China Ware Cistern |
| 7 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.( c ) Wash Hand Basin/ Urinal Pot |
| 8 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.( e ) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 9 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets,elbows etc.), painting with anti corrosive bitumastic paint, testing cutting, threading inside buiding complete(b) 20 mm i/d |
| 10 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets,elbows etc.), painting with anti corrosive bitumastic paint, testing cutting, threading inside buiding complete (a) 15mm i/d |
| 11 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.(i) C.P. brass Bib cock long nose/ long body foam flow without flange. |
| 12 | Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(a)15mm i/d G.I. Union |
| 13 | Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(b) 20mm i/d G.I. Union |
| 14 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 15 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 16 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble saltPrint Penetration should be up to 1 to 2 mm after the tiles are fired & polished )(a )Size 600x600 mm |
| 17 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 18 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550 mm x 400 mm x 815 mm |
| 19 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (i) Vitreous chinaware standard white pedestal for wash hand basin. |
| 20 | Providing and fixing in position vitreous ChinawarewhitelIndianmakelargeflatback orangular lippedfronturinal375x390x590 mmofapprovedmake(totheapprovalof the Engineer-in-charge) consistingofC.P.brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete |
| 21 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) a)Size 600mmx450mm |
| 22 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 23 | Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. (a) C.P.brass 15mm stop cock Male and female end. |
| 24 | Providing and fixing in position PVC Flexibel tube connection of approved make (to the approval of Engineer-in-charge) complete in all respects.(f) PVC tube connection of size 15mm x600mm with C.P. Brass nut |
| 25 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 26 | Providing&placing inpositionon terrace (at all floor levels)HDPEwater storage tanksof approvedmake(totheapprovalofEngineer in-charge) with cover with suitable locking arrangement andmakingnecessaryholes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks |
| 27 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.a)C.P. brass toilet paper holder |
| 28 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.(a)C.P. brass towel Rails size 15mm dia 610mm long |
| 29 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.a) CP brass Acrylic Shelf size 560mmx130mm |
| 30 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 31 | Vitreous white Chinaware Partition(ii)Large partition size75x16.5x 36.5 cm |
| 32 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.(b)20 mm internal diametre pipe line |
| 33 | Scraping ( a)White wash and colour wash. |
| 34 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 35 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. |
| 36 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) ISI designation no III(Size of door up to 851 to 1000 mm) CSR 2020 17.43(c) |
| 37 | Dismantling concrete ( e )Reinforced cement concrete |
| 38 | RemovingDoorsandWindows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled.(a) Doorsof area 3 sqm and below. |
| 39 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead(a) With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm CSR 2020 31.1(a) |
| 40 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paidfor separately)(a) For fixed portion and chawkhats CSR 2020 17.45(a) |
| 41 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paidfor separately)(b)For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required . |
| 42 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm CSR 2020 17.23(ii) |
| 43 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres aboveplinth level. |
| 44 | 12.5 mm thick cement plaster 1:5 |
| 45 | Preparationof plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying twoormore coats toget required finish |
| 46 | Providing and fixing in position G.I. Tank Nipple of approved make (to theapproval of Engineer-in-charge) in PVC Water storage tanks complete in all respect (b)G.I. tank nipple 20mmi/d) |
| 47 | Providingand fixing inpositionC.P. brass overhead shower 1 flowwith shower arm with15mmi/dinlet ofapprovedmake(tothe approval ofEngineer-in-charge) complete in all respect. |
| 48 | Providing and fixing in position automatic brass Ball Cock in tanks Brass(B) Ball Cock with rod andPlastic Ball(ii) 20mm i/d |
| 49 | Providing,fixingandjointingISIMarkedGun Metal peet valves (HeavyPattern)asper IS 778withhandwheels,onG.I.Pipelines laid inthegroundor insidebuildings includingall carriages complete(b)20mmi/dGunMetalpeetvalveheavy pattern |
| 50 | Providingandfixingaluminumslidingdoor boltsISImarkedanodized(anodiccoating not less thangradeAC10as per IS : 1868) transparent or dyed to required colourorshadewithnutsandscrewsetc. complete :(A) 300x16 mm |
| 51 | Providing Exhaust fans of make Havells, fybros, crompton, usha or equivalent as per the satisfaction of Engineer-in-charge complete in all respect (rate as per Quotation-IV) |
| 52 | Erection of fan:Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- (c )Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 53 | SURFACE PVC CONDUIT PIPE WIRINGSYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductorsingle core FR cable (ISI marked) overall1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surfaceboxes) required for suitable number of modules (Modular accessories) for havingStep type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and CallBell), MS saddle clamp,PVC Circular junctionBoxes (Four way 1½\" deep for walls), bonding to earth with PVC insulated copperconductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wallsocket & plug control point) and other petty material etc., including the cost of above material and painting as required (vi) Wiring 16/20Amp. power plug control point |
| 54 | SURFACE PVC CONDUIT PIPE WIRINGSYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductorsingle core FR cable (ISI marked) overall1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surfaceboxes) required for suitable number of modules (Modular accessories) for havingStep type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and CallBell), MS saddle clamp,PVC Circular junctionBoxes (Four way 1½\" deep for walls), bonding to earth with PVC insulated copperconductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wallsocket & plug control point) and other petty material etc., including the cost of above material and painting as required(v) Wiring 6 Amp. Plug control comprising wallsocket point |
| 55 | SURFACE PVC CONDUIT PIPE WIRINGSYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductorsingle core FR cable (ISI marked) overall1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20 mm/25 mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surfaceboxes) required for suitable number of modules (Modular accessories) for havingStep type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10 Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVCconnector (For Fan Box and CallBell), MS saddle clamp,PVC Circular junctionBoxes (Four way 1½\" deep for walls), bonding to earth with PVC insulated copperconductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wallsocket & plug control point) and other petty material etc., including the cost of above material and painting as required (ii) Wiring light point |
| 56 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-(iii)Overall size 2.5sq.mm (Un-sheathed) |
