|
| 1 | ELECTRICAL WORKS |
| 2 | Design and SITC of Electrical Starter Panel Counstructed out of 14 Gauge CRCA sheets with neccessary powder coating, for exhaust with 1 nos. motor, with auto and manual functions potential free contacts to be provided to interlock with local emergency fire panel, Starter panel shall be Comprising of all electrical accessories for smooth operation of fan including suitable starter for the same.MCB, DOL, O/L relay, SPP, Timer and other neccessary safety controls, Volt meter, Ampsmeter, RYB indication, ON/OFF indications, start/stop push button. |
| 3 | SITC of 1100 V a.c. grade FRLS PVCCU cabling along with appropriate size of saddles,spacers complete with PVC conduit in approved manner. Make- Polycab/RRK/Finolex3 Core x 4 Sqmm CU Cable |
| 4 | 3 Core x 2.5 Sqmm CU Cable |
| 5 | 3 Core x 1.5 Sqmm CU Cable |
| 6 | 4 Core x 4 Sqmm CU Cable |
| 7 | SITC of GI earthing of 8 SWG including end connections complete in all respect. |
| 8 | CAFETERIA VENTILATION SYSTEM |
| 9 | Supply & installation of cabinet type exhaust unit comprising of 25 mm thick, CFC free PUF injected ( Density 40kg/cum) insulated sandwich panels of precoated outer skin of 0.6 mm and inner skin of 0.6 mm, Frame work of hollow extruded AL profile,Fan section withDIDW backward curved Fan, 01no motor (7.5 HP), Drive set, flexible connector and Anti-vibrator Mounts Capacity- 9000CFM , Static pressure 60 mm. |
| 10 | SITC of wall mounted / ceiling suspended canopy L shape type kitchen exhaust fume hood in SS (202) constuction SS22SWG at flow rate of 0.5 cu mtr / sec with SS (202) oil Filters to capture oil and evacuate heat smoke ,odour, steam, vapour and other contaminante generated from cooking in order to provide comforable and productive work environment for kitchen personnel. Size of Hood with filter-2420 x700 x500 /1030 X 850 X 500 |
| 11 | Size - 1020 X 850 X 500 |
| 12 | Supply, installation, balancing and commissioning of factory fabricated GSS sheetmetal rectangular/round ducting complete with neoprene rubber gaskets, elbows,Louverssplitter dampers, vanes, hangers, supports etcspecifications of following sheet thickness complete as required 22 Gauge GI ducting(50RFT) |
| 13 | CAFETERIA FURNITURE |
| 14 | Supply and installation of4 seated cafeteria tables with integrated seating, comprising a fixed table with permanently attached chairs, complete with all fittings and accessories. Table top is SS (304) brushed finish with PLB insert durability and seats are offer in plastic shell seat . Level adjustors are provided to take care of unevenness in floor .Overall size including chair Dimensions: H750mm x W1180mm x D1635mm |
| 15 | CafeteriaChairs Specifications: (Qty-20) Crafted moulded plastic heavy duty chair using advance gas injection moulding technology with matt finish surface for comfort and durability. (Colour as per buyer choice) Dimensions: H81.8cm x W51.5cm x D52.5cm |
| 16 | CIVIL WORKS |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) |
| 18 | CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix :13.4.1 1:4 (1 cement: 4 coarse sand) |
| 19 | Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. |
| 20 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC filmon the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 21 | Providing and laying gang saw cut 30 mm thick, mirror polished premoulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 16.87.2 With granite stone of all colour except black, cherry/ruby redof area less than 0.50 sqm. |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 24 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.1 Size of Tile 600 x 600 mm |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
