|
| 1 | Item No 1 :-Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. |
| 2 | Item No 2 :-Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete( Material obtained from Other sources) |
| 3 | Item No 3 :-Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - III Material |
| 4 | IItem No 4 :- Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver |
| 5 | Item No 5 :- Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning ofroad surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means. |
| 6 | Item No. 6 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 7 | Item No. 7:- DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | Item No. 8 :- BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 9 | Item No. 9 :- Road Marking with Hot Applied Thermoplastic Compound witfi ReflectorizingGlassBeads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorizing glassbeads @250 gms per sqm area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.Tfie finished surface to be level, uniform and free from streak sandhoIes.complete. |
| 10 | Item No. 10 :- Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 11 | Item No. 11 ;-Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 12 | Item No. 12 :- Providing R.C.C railing of 1 m height with cast in situ R.C.C vertical posts at 2m center to center, of size 250mm x 275mm and horizaontal railing in 3 tiers of size 170mm x 175mm each in M-25 grade of concrete with steel reinforcement |
| 13 | Item No. 13 :- Earthwork in excavation for foundation of structures in all types of soil |
| 14 | Item No. 14 :- Providing and laying Plain Cement Concrete / Reinforced Cement Concrete in open foundations for Drain and Retaining wall construction |
| 15 | Item No. 15:- Providing and laying Plain Cement Concrete/ Reinforced Cement Concrete in substructure/ wing walls/ return wallsetc. excludingreinforcement for retaining walls height up to 5m for Raft RCC M30 |
| 16 | Item No. 16:- Providing and laying Plain Cement Concrete/ Reinforced Cement Concrete in substructure/ wing walls/ return wallsetc. excludingreinforcement for retaining walls height up to 5m for Wall RCC M30 |
| 17 | Item No. 17:- Providing and laying filter media with granular materials as per clause no 2504.22 of MoRTH specifications |
| 18 | Item No. 18:- Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm diamade out of 3 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm diamade out of 3mm aluminum composite material |
| 19 | Item No. 19:- Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mmmade out of 3 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier. 600 mmmade out of 3mm aluminum composite material |
| 20 | Item No. 20:- Providing and fixing Cautionary/Warning sign boards in Octagone size of 750 mmmade out of 4 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint andsupported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier. 750 mmmade out of 4mm aluminum composite material |
