|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level:1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 2 | Steel work in built up tubular(round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Hot finished welded type tubes |
| 3 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying coat of approved steel primer all complete. |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : Local best quality Tolhao wood. |
| 5 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
| 7 | 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg/ sqcm. |
| 8 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 9 | Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications : Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @0.75 ltr/10 sqm. |
| 10 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 11 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 12 | Wiring for light point / Fan point/ Exhaust Fan ponit / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing and capping with modular type switch, modular plate suitable sizeG.I. Box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 13 | 3. Group C |
| 14 | Wiring for light pont / power plug with 2x4mm2PVC insulated copper conductor single core cable inPVC casing and capping along with 1 no. of 4mm2PVC insulated copper conductor single core cable for loop earthing etc. as reqd. |
| 15 | S/F PVC box of size 101mmx178mm (Nominal size)/(4\"\"x7\"\")PVC board on surface including P/F 3 pin 5/6 amp socket outlet and 5/6 amp piano type switch connection etc as reqd. |
| 16 | S/F PVC box of size 152mmx203mm (Nominal or size)/(6\"\"x8\"\")PVC board on surface including P/F 6 pin 15/16 amp socket outlet and 15/16 amp piano type switch connection etc as reqd. |
| 17 | Wiring for circuit / sub- main wiring along with earth wire with(the following sizes of ) FRPVC insulated copper conductor single core cable inPVC casing & capping etc. as reqd. |
| 18 | a. 2x1.5mm2 + 1x2.5mm2 earth wire |
| 19 | b. 2x2.5mm2 + 1x2.5mm2 earth wire |
| 20 | c.2x4mm2+ 1x4mm2 earth wire |
| 21 | S/F 20W CFL lamp. |
| 22 | S/Fbrass batten /angle holder i/c conection etc as reqd. |
| 23 | S/F 3 pin 5 amp ceiling rose on the existing junction box /wooden block i/c connection etc as reqd |
| 24 | S/F 48\"\" Sweep (1200mm) A.C ceilling fan complete with down rod canopy, 3 (three) blades but without regulator etc as reqd.( Make Bajaj/Usha or simillar) |
| 25 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc as reqd. |
| 26 | S/F (of the following ways) single door singlepole and neutral , prewired, sheet stee,l MCB distribution board, 240 V on surface/ recessed complete with tinned copper bus bar neutral bus bar , earth bar , din bar, detachable gland plate , interconnection ,phosphatized and powder painted including earthing etc. as reqd. |
| 27 | b.8 way single door |
| 28 | Supplying and fixing 5 amp to 32amp rating 230 V \"B\" series MCB for lighting and other load of ( following poles ) in the existing MCB DB complete with connection testing and commissioning etc as reqd. |
| 29 | 1.Single pole |
| 30 | S/F( following rating) double pole 240v isolator in the existing MCB DB complete with connection ,testing and commissioning as reqd. |
| 31 | 2.63 amp |
| 32 | Supplyand Fixing ( Following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd. |
| 33 | 1.5/6 amps switch |
| 34 | 2.3 pin 5/6amps socket outlet |
| 35 | 3.15/16 amps switch |
| 36 | 4.6 pin 15/16 amps socket outlet |
