Tender For Maintenance Of Various Schemes Under Na-Ii (East Zone). Providing And Fixing Of Speed Calming Measures I.E Rubber Rumble Strip, Signage Board, Studs Etc. At Paper Market, Ifc Gazipur., Delhi-Delhi
TDR : 53358865
Tender Notice
BOQ
3 Days Left
Delhi
Delhi
Tender For Maintenance Of Various Schemes Under Na-Ii (East Zone). Providing And Fixing Of Speed Calming Measures I.E Rubber Rumble Strip, Signage Board, Studs Etc. At Paper Market, Ifc Gazipur.
Name of Work:M/o various schemes under NA-II (East Zone).Sub Head: Providing and fixing of speed calming measures i.erubber rumble strip, signage board, studs etc. at PaperMarket, IFC Gazipur.
Sl. No.
Item Description
1
Providing, transporting and fixing of Rubber rumble strip of size 500 × 125 × 25 mm confirming to the specification laid down by Ministry of road transport and highways (MORT&H) and British standard including installation complete as per Direction of Engineer-in-Charge.
2
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paintof required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.(a)16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm.
3
(b) Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of3650 mm.
4
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
5
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6 mm M.S. plate welded at bottom and embedded 150 mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450 mm deep for the same in bitumen/concrete pavement at specified spacing.
6
Providing & fixing spring post (Flexible) safetyhaving size 750mm height and Top ………… 800mm, battom diamet 200 mm and minimum weight 1 KG/piece with 3 retro reflective tape for parking and complete fitting and accessories etc. complete as par direction of Engineer-in-Charge.
7
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
8
Amount after GST reduction factor(except on item 1&5)
9
Add 3% cost index on DSR 2023 items(except item No. 1 & 5)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
