|
| 1 | Table 900x900x760mm (Drawing No FD-1009) without drawer steel similar patternand removing the exiting unserviceable part with the following new part :-(a) Top of size 900mm x 900mm made out of 19mm thick Prelaminated Particle board one side decorative of approved shade including 4mm thick edging tape alround as per existing size and shape as per drg. |
| 2 | (b) Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. |
| 3 | (c) PVC Ring /Rubber shoe as per drg. |
| 4 | (d) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black paint as per drgs |
| 5 | Table 900x600x760mm (Drawing No FD-1008 & 1007)with drawer/without drawer steel FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-(a) Top size 900mm x 600mmsize made out of 19mm thick prelaminated particle board one side decorative of approved shape incl 4mm thick edging tape as per existing size and shape as per drg. |
| 6 | (b) Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. |
| 7 | (c) Lock for drawer/shutter with duplicate keys |
| 8 | (d)Drawers as per existing size and shape duly paintsynthetic enamal as per drgs. |
| 9 | (e) PVC Ring /Rubber shoe as per drg. |
| 10 | (f) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black paint as per drgs |
| 11 | Table Steel 1670x760x750mm FD-1012similar pattern and removing the existing unserviceable part with the following new parts :-(a) Top of size 1670mm x 760mm made out of 1.0mm thick Stainless Steel Sheet welded on Top all as shown on drawing and directed. |
| 12 | (b) Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 750mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. |
| 13 | (c) PVC Ring /Rubber shoe as per drg. |
| 14 | (d) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs |
| 15 | Almirah large steel FD -1031 & 1033 similar pattern and removing the existing unserviceable part with following new part as per drg.(a) MS locks 6 lever brass 50mmx50mm with duplicate keys as per drg. |
| 16 | (b) Handle Chromium plated handle (superior quality) of existing size, shape, complete all as specified, shown on drg and directed. |
| 17 | (c) Removing the existing complete cleats of Almirah Large Steel and supply & fixing new locking device complete of apropriate size & shape as per existing pattern all as specified as per drg. |
| 18 | (d) Taking out old unserviceable locking verticle rod of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. |
| 19 | (e) Taking out old unserviceable shutter of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. |
| 20 | (f) Taking out old unserviceable leg of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. |
| 21 | (g) Taking out old underviceable shelves of Almirah Large Steel and supply & fixing new shelf made out of 1.00 mm thick MS sheet, size 480x915mm including new angle iron cleat, nuts, bolts etc. complete all as shown on drawing and as specefied. |
| 22 | (h) M & L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 23 | Almirah Medium Steel FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-(a) Removing the existing complete locking device of Almirah Medium Steel and supply & fixing new locking device complete of apropriate size & shape as per existing pattern all as specified as per drg. |
| 24 | (b) Removing the existing complete locks of Almirah Medium Steel and supply & fixing new lock of apropriate size of Godrej pattern as per existing design 3 lever with two keys after proper setting of shutter all as specified as per drg. |
| 25 | (c) Hinges 75mm as per drg. |
| 26 | (d) Handle Chromium plated handle (superior quality) of existing size, shape, complete all as specified, shown on drg and directed. |
| 27 | (e) Taking out old unserviceable leg of Almirah medium steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specified. |
| 28 | (f) Taking out old underviceable shelves of Almirah Medium Steel and supply & fixing new shelf made out of 1.00 mm thick MS sheet, size 480x915mm including new angle iron cleat, nuts, bolts etc. complete all as shown on drawing and as specefied. |
| 29 | (g) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 30 | Chair Verandah FD-256/336 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.(a) M&L for removing of existing old used and unserviceable cane from Chair Verandah and re-tapping (reweaving) both side with new white colour plastic cane 4mm best quality white colour and shall be woven as per godrej pattern(seat & back both), stitched with approved plastic cane at starting and terminating ends as per trade practice all as shown on drawings. |
| 31 | (b) M&L for removing unserviceable rubber shoe of chair Verandah and providing new hard rubber shoe in black colour as per sample kept in Furniture Yard Alwar. |
| 32 | (c) M&L for preparation/cleaning old painted steel surface of chair Verandah and painting with a coat of white synthetic enameled paint over a coat of red oxide primer after preparation of surfaces all as specified as per drg. |
| 33 | Table Office Officer/Clerk Steel (1200x600x760mm) FD-1003/1004 with drawer similar patternand removing the exiting unserviceable part with the following new part :-(a) Top size 1200mm x 600mmsize made out of 18mm thick prelaminated MDF board one side decorative of approved shape incl 4mm thick edging tape as per existing size and shape as per drg. |
| 34 | (b) Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. |
| 35 | (c) Lock for drawer/shutter with duplicate keys |
| 36 | (d) Drawers as per existing size and shape duly paintsynthetic enamal as per drgs. |
| 37 | (e) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs |
| 38 | (f) PVC Ring /Rubber shoe as per drg. |
| 39 | Locker Bed Side Steel FD-1029 similar pattern and removing the existing unserviceable part with following new part as per drg :-(a) Hinges 75mm as per drg. |
| 40 | (b) Hasp & Staple (superior quality) of existing size, shape, complete all as specified, shown on drg and directed. |
| 41 | (c) Taking out old underviceable Handle of Locker Bed Side Steel Steel and supply & fixing new 1mm thick chromium plated 100 long handle fixed to shutter complete all as shown on drawing and as specefied. |
| 42 | (d) Taking out old underviceable shelves of Locker Bed Side Steel Steel and supply & fixing new shelf made out of 1.00 mm thick MS sheet, size 560 x 380mm including new angle iron cleat, nuts, bolts etc. complete all as shown on drawing and as specefied. |
| 43 | (e) Taking out old underviceable Steel Conduit Pipe of Locker Bed Side Steeland supply & fixing new Pipe 1.6MM thickx 380 mm long including socket complete all as shown on drawing and as specefied. |
| 44 | (f) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 45 | Book Case Steel FD-1028 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.(a) M&L for removing of existing old used and unserviceable Glass Pane and fixing newGlass pane of size 710mm x 250mm long 3mm thick glass pane as shown on drawings. |
| 46 | (b) M&L for removing unserviceable Handle and providing new handle as shown on drgs. |
| 47 | (c) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 48 | Foam Without Back FD-77 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.(a) M&L for removing of existing old used and unserviceable Bottom TeaakWood plank and fixing newwooden plank of thickness 25mm and size 1525 mm x 225 mm fitted with 09 Nos of GI Bolt in Left, right and middle as shown on drawings. |
| 49 | (b) M&L for removing of existing old used and unserviceable MS Tube Legs & Bottom and replacing with new 25 mm (16 Gauge) thick MS Tube legs bent into shape (3 RM Structure)as shown on drawings. |
| 50 | (c) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 51 | Foam With Back FD-78 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.(a) M&L for removing of existing old used and unserviceable Bottom TeakWood plank and fixing newwooden plank of thickness 25mm and size 1800 mm x 255 mm fitted with 09 Nos of GI Bolt in Left, right and middle as shown on drawings. |
| 52 | (b) M&L for removing of existing old used and unserviceable MS Tube Legs and replacing with new 25 mm (16 Gauge) thick MS Tube legs bent into shape as shown on drawings. |
| 53 | (c) M&L for removing of existing old used and unserviceable Top TeakWood plank and fixing newwooden plank of thickness 25mm and size 1800 mm x 150 mm fitted with 04 Nos of GI Bolt in Left, right as shown on drawings. |
| 54 | (d) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 55 | Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.(a) Taking out old unserviceable seat & back andsupply and fixing new wooden seat 1st class hard wood (shisham) made to shape for Chair CB Steel with/with out arms duly caned with 2 to 2.5mm wide half round as per godrej pattern with and including fixing with machine screw i.e bolt 75mm size with nuts and washers through holes in the wooden frame including painting with two coats of synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface complete all as specified. |
| 56 | (b) Removing old unserviceable flat iron and supply and fixing new flat iron 25mmx 3mm, 450mm long fixed under the wooden seat of the Chair CB steel with arms or without arms by welding (so that the wooden seat can rest on it) with and including painting the flat iron with two coats of synthetic enamel paint of approved colour over a coat of primer to match with existing colour complete all as specified and as directed. Note: Two Nos flat iron strip shall be provided to seat of each chair and cost of two strip shall be considered in one job. |
| 57 | (c) Left/right arms rest with nut and bolts of Chair CB with arms as per drg. |
| 58 | (d) PVC Ring /Rubber shoe as per drg. |
| 59 | (e) Preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, providing two coat of french polish match with existing colour. |
| 60 | Rack Six Tiers Steel FD-1038 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.(a) M&L for removing of existing old used and unserviceable Shelves and fixing new Shelves made out of MS Sheet of size 915mm x 610mm long 1mm thick welded with Iron angle as shown on drawings. |
| 61 | (b) M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. |
| 62 | M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-(a) Rack Steel various type (FD-106) |
| 63 | (b) book Shelf open and close type (small/large) steel (FD-69, FD-90) |
| 64 | (c) Stool Steel 305x305x510/760mm (FD-81) |
| 65 | M & L for removing carefully following existing broken/unserviceable components/members of Chair dinningand supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Cane :- Cane as per IS shall be 2mm wide and 0.04mm thick, half roundand 4 mm wide flat for border around seat as per existing size and shape as per FD-228/279/1105. |
| 66 | (b) Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 67 | (c) Font leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 68 | (d) Front/ Back top rail as per existing size and shape as per FD-228. |
| 69 | (e) Left/Right top rail as per existing size and shape as per FD-228. |
| 70 | (f) Upper/ Lower Stiffner for back support as per existing size and shape duly furnished and polished. |
| 71 | (g) Centre Stiffener 16mmx25mmx25mm as per existing size and shape as perFD-228. |
| 72 | (h) Side Stiffner for leg - 400mmx25mmx19mm as perexisting size and shape as per FD-228. |
| 73 | (j) PVC Ring/ Rubber shoe as per FD-228. |
| 74 | (k) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour and directed by engr-in-charge |
| 75 | M & L for removing carefully following existing broken/unserviceable components/members ofChair Writingand supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per FD-202/280/1107. |
| 76 | (b) Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 77 | (c) Front leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 78 | (d) Side Stiffener for bottom legs as per size and shape duly furnished and polished. |
| 79 | (e) Centre Stiffener for bottom legs as per size and shape duly furnished and polished. |
| 80 | (f) PVC Ring/ Rubber shoe as per FD-202/280. |
| 81 | (g) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 82 | M & L for removing carefully following existing broken/unserviceable components/members ofChair Easyand supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Cane (Seat and Back):- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg. |
| 83 | (b) Front/Rear leg of size 55mm x 25mmx 535mm long made out of 1st class hardwood (Teak) |
| 84 | (c) Left/Right arm rest of size 610mm x 55mm x 25mm made out of 1st class hardwood (Teak). |
| 85 | (d) Front rail of size 520mm x 50mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings. |
| 86 | (e) Rear rail of size 500mm x 70mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings. |
| 87 | (f) Side rail of size 530mm x 70mm x 40mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings. |
| 88 | (g) Back frame of size 480mm x 55mm x 19mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings. |
| 89 | (h) PVC Ring/ Rubber shoe as per Drg. |
| 90 | (j) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 91 | M & L for removing carefully following existing broken/unserviceable components/members of Chair Easy cushioned and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Rear leg of size 70mm x 25mmx 490mm long made out of 1st class hardwood (Teak). |
| 92 | (b) Front leg of size 70mm x 25mm x 545mm long made out of 1st class hardwood (Teak). |
| 93 | (c) Left/Right arm rest of size 610mm x 65mm x 25mm made out of 1st class hardwood (Teak). |
| 94 | (d) Front rail of size 510mm x 70mm x 25mm made out of 1st class hardwood (Teak). |
| 95 | (e) Rear rail of size 480mm x 70mm x 25mm made out of 1st class hardwood (Teak). |
| 96 | (f) Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak). |
| 97 | (g) Seat shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing. |
| 98 | (h) Back shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing. |
| 99 | (j) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 100 | M & L for removing carefully following existing unserviceable components/members of Bed (with ply wood top and supply and fixing new components/members complete all as shown on drawing and directed:-(a) Head rest legs as per existing size and shape duly furnished and polished. |
| 101 | (b) Foot restlegs as per existing size and shape duly furnished and polished. |
| 102 | (c) Long rail as per existing size and shape duly furnished and polished. |
| 103 | (d) Short rail 830 x 90x 35 mm made out of 2nd class hard wood as per drg. |
| 104 | (e) Centre Stiffener to support ply wood bed top as per existing size and shape duly furnished and polished. |
| 105 | (f) Cleatof Steel between rail and legs for tighting of bed. |
| 106 | (g) Plywood Top 12mm thick BWR 1st grade as per existing size and shape. |
| 107 | (h) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 108 | Removing carefully the following existing broken / unserviceable fixtures / wooden members of Side board with drawer andsupply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Top of size 1220mm x 445mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 109 | (b) Sides of size 595mm x 455mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade). |
| 110 | (c) Shutter of size 775mm x 585mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) duly furnish and polished. |
| 111 | (d) Drawer of size 115mm x 385mm duly furnish & polished as per drg. |
| 112 | (e) Drawer of size 180mm x 385mmduly furnish & polished as per drg. |
| 113 | (f) Stiffener made out of 1st class hard wood (teak) of size 25mm x 45mm x 1220mm. |
| 114 | (g) Back of size 1220mm x 635mm made of plywood 6mm thick commercial both sides. |
| 115 | (h) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 116 | M & L for removing carefully following existing unserviceable components/members of Sofa set and supply and fixing new components/members complete all as shown on drawing and directed:-(a) Front leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing. |
| 117 | (b) Rear leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing. |
| 118 | (c) Arm Made out of 1st class hardwood (Teak) of size 70mm x 35mm and length as shown on drawing. |
| 119 | (d) Batten made out of 1st class hardwood (Teak) of size 20mm x 50mm & length as shown on drawing. |
| 120 | (e) Back frame made out of 1st class hardwood (Teak) of size 70mm x 35mm & length as shown on drawing. |
| 121 | (f) M&L for replacement of unserviceable seat/ back cushion with new 100mm thick with 40 density of size 560mm x 530mm x 100mm thick Zonal specification for sofa set all as specified and directed |
| 122 | (g) Removing carefully existing cover of seat/back cushion of size 560mm x 530mm x 100mm thick complete and material & labour for new cover of white long cloth not less than Rs 80/-per mtr and tapestry cloth of rate not less than Rs. 250/- per metre complete all as specified and directed. |
| 123 | (h) PVC Ring/ Rubber shoe as per Drg. |
| 124 | (j) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 125 | M & L for removing carefully following existing broken/unserviceable components/members of Table 900 x 600 x 760mm with/without drawer wdn and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Side rail as per existing size made out of 1st class hardwood (Teak) |
| 126 | (b) Leg of size 60 x 60mm at top and 40 x 40mm at bottom x 740 mm long made out of 1st class hardwood (Teak). |
| 127 | (c) Stiffener of size 40 x 25 x 760mm made out of 1st class hardwood (Teak). |
| 128 | (d) Stiffener of size 40 x 25 x 460mm made out of 1st class hardwood (Teak). |
| 129 | (e) Top of size 900mm x 600mm made out of 18mm thick prelaminated MDF board as per IS one side decorative of approved shade including 4mm thick teakwood edging alround. |
| 130 | (f) Drawer of size 300mm x 460mm x 110mm with knob of Mild steel chromium plated of size 40mm. |
| 131 | (g) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 132 | M & L for removing carefully following existing broken/unserviceable omponents/ members ofDesk with Seat and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) DeskFront shall be made of 18mm thick pre-laminated particle board of natural teak veneer shade made as box with front side open and top sloping with PVCedging on front side irrespective of what is shown on drawing |
| 133 | (b) The back of desk shall be of 6mm thick MDF board or 6mm thick pre-laminated particle board with teak veneer shade as directed by Engineer-in-charge with PVC edging alround irrespective of what is shown on drawing |
| 134 | (c) DeskSeat shall be made of 18mm thick pre-laminated particle board of natural teak veneer shade with PVCedging is shown on drawing |
| 135 | (d) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of Paint match with existing colour. |
| 136 | M & L for removing carefully following existing broken/unserviceable components/members of Table Dinning 6/8 persons 1500 x 900 x 760mm and 1800 x 900 x 760mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Side railas per existing size made out of 1st class hardwood (Teak) |
| 137 | (b) Front /Rear rail as per existing size made out of 1st class hardwood (Teak) |
| 138 | (c) Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak). |
| 139 | (d) Top of size 1500mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 140 | (e) Top of size 1800mm x 900mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround. |
| 141 | (f) PVC Shoes /Buffers. |
| 142 | (g) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 143 | Removing carefully the following existing broken / unserviceable fixtures / wooden members of Mirror Dressing (Gents) WM and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed :-(a) Mirror Should be 1150mm x 550mm with 5.5 mm thickness backed by 12mm thick phenol bonded ply with 50 mm x 28mm teak wood frame on all sides |
| 144 | (b) Sides, bottom and top shall be 18mm thick prelaminated particle board with teak wood edging. |
| 145 | (c) Shelves will be 8 mm thick glass with edges polished |
| 146 | (d) Back of mirror made of plywood 12mm thick of size 1200mm x600mm. |
| 147 | Removing carefully the following existing broken / unserviceable fixtures / wooden members ofTable Dressing Ladies and supply and fixing new components/members duly finished complete all as shown on drawing and directed :(a) Mirror Should be 1200mm x 600mm with 5.5 mm thickness backed by 12mm thick phenol bonded ply with 50 mm x 28mm teak wood frame on all sides |
| 148 | (b) Top shall be 1200 mm x 600 x 18 mm thick prelaminated MDF Board |
| 149 | (c) Shutters shall be 400mm x 350mm x 18mm thick Prelaminated MDF Board |
| 150 | (d) Drawers shall be 100mm x 350mm x 350 mm of 18 mm thick Prelaminated MDF Board with bottom 12 ply duly fitted with 10 \" channels |
| 151 | (e) Back shall be 1150mmx550 mm 12mm thick BWR Ply board |
| 152 | Removing carefully the following existing broken / unserviceable fixtures / wooden members ofPeg Table (450x300x380mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm at top cut to shape and 25mm x 25mm at bottom, 362mm height. |
| 153 | (b) Front top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 300mm |
| 154 | (c) Side top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 200mm |
| 155 | (d) Top of size 450mm x 300mm made out of 18mm thickdecorative MDF boardas per IS one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 156 | (e) PVC Shoes /Buffers as per sample. |
| 157 | (f) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 158 | Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Side of size 435mm x 300mm made out of 18mm thickdecorative MDF boardof approved shade (exterior grade) |
| 159 | (b) Shelf of size 380mm x 300mm made out of 18mm thickdecorative MDF boarde of approved shade (exterior grade) |
| 160 | (c) Bottom of size 380mm x 300mm made out of 18mm thickdecorative MDF board of approved shade (exterior grade) |
| 161 | (d) Back of size 380mm x 435mm made out of6mm thick plywood one side decorative face and other side commercial face. |
| 162 | (e) Top of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 163 | (f) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 164 | Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table writing (1145 x 600 x 760mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Leg Made out of 1st class hardwood (Teak) of size 55mm x 35mm of height as shown on drawing. |
| 165 | (b) Front top rail made out of 1st class hardwood (Teak) of size 50mm x 25mm length as shown on drawing. |
| 166 | (c) Top of size 1145mm x 600mm made out of 18mm thick decorative MDF board as per IS of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 167 | (d) Back made out of 6mm thick plywood commercial face both sides of size as shown on drawing. |
| 168 | (e) PVC Shoes/buffers/knob. |
| 169 | (f) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 170 | M & L for removing carefully following existing unserviceable components/members of Hat Stand With Mirror of and supply and fixing new components/members complete all as shown on drawing and directed:-(a) Plywood- Plywood for the back of board shall be 9mm thick and duly polished and sunmica to be pasted on front Side as per existing shade. |
| 171 | (b) Hooks for hanging of Caps will be as per the existing shape and size |
| 172 | (c) Glass for Mirror Will be as per existing shape and size |
| 173 | (d) Material & labour for preparation of all wooden surfaces of Hat Stand with mirror by removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed. |
| 174 | FMN Set Preparation/cleaning/ of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal Paint as per drgs |
| 175 | Side Rack with tray steek Preparation/cleaning/ of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal Paint as per drgs |
| 176 | M & L for removing carefully following existing unserviceable components/members of Stool Dressing CB of and supply and fixing new components/members complete all as shown on drawing and directed:-(a) Material & labour for preparation of all wooden surfaces removing of exising polish by scraping with sand paper and making surface smooth including making base for receiving of French polish on all new replaced wooden components and applying two coats of French polish all as specified and as directed. |
| 177 | (b) Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per drg |
| 178 | Table Dining OR Steel simmler patternand removing the exiting unserviceable part with the following new part :-(a) Top of tables shall be of 19mm thick pre-laminated MDF board with 4mm thick teak wood beeding allround the top as per existing size and shape. |
| 179 | (b) PVC Ring /Rubber shoe as per drg. |
| 180 | (c) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs |
| 181 | Removing carefully the following existing broken / unserviceable fixtures / wooden members ofTeapoy Wooden and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Leg Made out of 1st class hardwood (Teak) of size as per drg. |
| 182 | (b) Front top rail made out of 1st class hardwood (Teak) of size as per drg. |
| 183 | (c) Side top rail made out of 1st class hardwood (Teak) of size as per drg |
| 184 | (d) Top of18mm thickdecorative MDF boardas per IS one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround size as per drg. |
| 185 | (e) PVC Shoes /Buffers as per sample. |
| 186 | (f) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 187 | Removing carefully the following existing broken / unserviceable fixtures / wooden members ofTeapoy Varandah and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Legs shall be of 20 mm dia mild steel conduit of wall thickness 1.6 mm made in U-shape with bottom of legs in sides shall be 350mm apart. |
| 188 | (b) Top table shall be 19 mm thick prelaminated MDF boardwhite colour shall be fixed as directed by Engineer-in-charge as per drg |
| 189 | (c) PVC Shoes /Buffers as per sample. |
| 190 | (d) Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal Paint as per drgs |
| 191 | Treastle Store Room Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal Paint as per drgs |
| 192 | M & L for removing carefully following existing broken/unserviceable components/members of Chair wooden bottomand supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Seat of12MM thick decorative plywood with perforated holes 5MM dia at centre in a radius of 5 inch shall be fixed over the frame of the chair irrespective of what is shown on drg |
| 193 | (b) Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 194 | (c) Font leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak) |
| 195 | (d) Front/ Back top rail as per existing size and shape as per FD-228. |
| 196 | (e) Left/Right top rail as per existing size and shape as per FD-228. |
| 197 | (f) Upper/ Lower Stiffner for back support as per existing size and shape duly furnished and polished. |
| 198 | (g) Centre Stiffener 16mmx25mmx25mm as per existing size and shape as perFD-228. |
| 199 | (h) Side Stiffner for leg - 400mmx25mmx19mm as perexisting size and shape as per FD-228. |
| 200 | (j) PVC Ring/ Rubber shoe as per FD-228. |
| 201 | Removing carefully the following existing broken / unserviceable fixtures / wooden members ofTable Centre and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Leg Made out of 1st class hardwood (Teak) of size as per drg. |
| 202 | (b) Front top rail made out of 1st class hardwood (Teak) of size as per drg. |
| 203 | (c) Side top rail made out of 1st class hardwood (Teak) of size as per drg |
| 204 | (d) Top of size 1200mm x 600mm made out of 18mm thickdecorative MDF boardas per IS one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround. |
| 205 | (e) PVC Shoes /Buffers as per sample. |
| 206 | (f) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour. |
| 207 | M & L for removing carefully following existing broken/unserviceable components/members of Chair Varandah Steel and supply and fixing new components/members duly finished complete all as shown on drawing and directed:-(a) Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood. |
| 208 | (b) Material & labour for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of Black Paint match with existing colour.Note: (i)All MS Steel Items will be Make- SAIL/TATA/Jindal.(ii) All Handle and Hook will be Make- Godrej / Harrison/ Hardwin/ Everlite(iii) All repair work shall be carried out at GE Alwar furniture yard. (iv) Contractor should depute one Carpenter with helper and required tools on daily basis for routine work and no extra payment will be made out of this account as directed by Engr-in-charge. |
