|
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting outin hard / dense soil complete all as specified and directed |
| 2 | M&L for Surface dressingn.exc 15 cm deepin hard/dense soil and getting outfrom MD land compelete all as specified and as directed. |
| 3 | M&L for excavation over areas in soft/loose soil complete all as specified and as directed. |
| 4 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cablesetc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft / loosesoil complete all as specified and directed. |
| 5 | Returning filling in trenches including spreading, leveling,watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed |
| 6 | Removing excavated surplus soil to a distance not exceeding 50 mtsand depositing where directed .at a level not exceeding1.5 M above the starting point complete all as directed. |
| 7 | Removal of excavated surplus soil to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 8 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tilesin layers n.exc 15cm thick , watered & well rammedto true surface complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 10 | M&L for flat rough finished formwork to sides of footing, foundation etc complete all as specidied and as directed. |
| 11 | M&L for flat fairfinished formwork to soffits of slabs supported on walls complete all as specidied and as directed. |
| 12 | M&L for flat fair finished formwork to sides of columnscomplete all as specidied and as directed. |
| 13 | M&L for flat fairfinished formwork to sides and bottom of beams complete all as specidied and as directed. |
| 14 | M&L for flat rough finished formwork to Chajjas and similar items complete all as specidied and as directed. |
| 15 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in foundations, including raft footings, foundation beams, bases for columns etc all as specified and directed. |
| 16 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in slabs supported on walls etc all as specified and directed. |
| 17 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in columnsetc all as specified and directed. |
| 18 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Floor/roof beams etc all as specified and directed. |
| 19 | M&L for reinforced cement concrete Nominal mix type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Chajjas etc all as specified and directed. |
| 20 | M&L Precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregated for cover slab for man holes and set in CM 1:4 complete all as specified and as directed. |
| 21 | M&L for mildsteel deformed, TMT Bars 10 mm dia and overcut length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed. |
| 22 | All as per item No 21 here-in-before but 6 to 8 mm dia complete all as specified and as directed |
| 23 | All as per item No 21 here-in-before but 5 to 10 mm dia in stirupps spacers and binders complete all as specified and as directed. |
| 24 | M&L for moorum/red bajri filling in floors, laid in pavers n.exc 15 cm thick, spreaded, levelled and well rammed including watering complete all as specified and as directed |
| 25 | M&L Hardcore of gauge n. exc. 63mm broken stone boulders, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface in broken bricks boulders complete all as specified and as directed. |
| 26 | M&L for cement concrete 1:3:6 type C-2 using 40mm aggregate concrete bed to drain pipes of dia 150 mm including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed |
| 27 | Supply and laying Reinforced concrete pipes,class NP2, laid and jointed complete with collars 150mm internal diaincluding all necessary specials, cutting and jointing, testing as specified and directed. |
| 28 | M&Lcement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggreegate) as surface channels and drains complete all as specified and as directed. |
| 29 | M&L for extra for forming fair finished drian or cahnnel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc, complete all as specified and s directed. |
| 30 | M&L for Loose filling with broken bricksof gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed. |
| 31 | Providingcement concrete Type B1, 1:2 :4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts , boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 completeall as directed. |
| 32 | M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, not exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 34 | M & L for 75 mm thick plain cement conctere 1: 4 : 8type D2 using 40 mm graded crushedstone aggregateas in sub base offlooringcomplete all as specified and directed. |
| 35 | M&L 75mm thick 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection etc. laid in alternate bays finished even and fair without using extra cement complete all as specified and as directed. |
| 36 | M&LRendering 15 mm thick on other than fair faces of brick work or concrete surfaces with 1:6 CM on internal faces of wall, finishing the surfaces even & smooth without using extra cement complete all as specified and as directed |
| 37 | M&L for rendering 15 mm thick in CM 1:4 on any faces of stone masonry or concrete block masonry surface etcfinished the surface even and smooth without using extra cement complete all as specified. |
| 38 | M&LRendering 10mm thick on fair faces ofconcrete surfaces with 1:3 CM on ceiling surfaces etc., finishing the surfaces even & smooth w/o using extra cement complete all as specified and as directed. |
| 39 | Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15 mm screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 40 | M&LGlazed ceramic white/colouredtiles in vertical surfaces 450x300X7 mm thick set andjointed in neat cement slurry and pointed in white or coloured cement to match required shade incl rendering 10 mm thick cement plasterin C.M 1: 4 as backing coat to receive wall tiles etc complete all as specified and directed. |
| 41 | M&L for factory made 80mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-40 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed. (Note : Quoted rate is deemed tobe inclusive of 50 mm thick compactedsand cushoning). |
| 42 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm (ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. |
| 43 | Solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube supplying and fixing in opening complete all as per specification & drawing and directed by Engr-in-Charge |
| 44 | S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail &bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing. |
| 45 | S&F AluminIum anodised barrel tower bolt of size 150mm extruded section complete all as specified and directed |
| 46 | S&F Extruded aluminum alloy handles of size 150mm fabricated type anodised complete all as specified and directed |
| 47 | S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) complete all as specified and directed |
| 48 | M&L Prepration of new plastered surfaces of ceilingand applying three coats of white washing complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,alkali & fungal reisistance, dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm includingcompleteall as specified and directed. |
| 50 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distember over 1 to 2 mm thick putty finish complete all as specified and directed. |
| 51 | M &L for Applying oil bound bitumen primer @ 0.20 kg/sqm and providing 3mm thick APP modified water proofing membrane weighting not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 150mm centigrade, having tensile strength of 650 N/sqcm and 350 N/sqcm in longitudinal and transverse directions respectively of the reinforcedtearing strength of 180N by torch application with minimum 10cm side overlapping and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 kg/sqm top of membrane surface shall then be finished with solar reflective bituminous aluminium paint @ 0.10 kg/sqm complete all as per manufacturer instructions and as directed by Engineer-in-Charge. |
| 52 | S&F offlushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve, flush pipe etc complete all as specified and as directed. |
| 53 | S&F Vitreous china wash basin white , flat back size 580 X 450 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and as directed. |
| 54 | S&F viterous china water closet pedestal pattern with P or S trap incl connection to flush and water pipe etc incl EWC seat cover white flat bottom solid with CP hinging device, nuts & bolts etccomplete all as specified and as directed |
| 55 | S&F Vitreous china boul urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreaderof any colour for fixing with 15mm dia pipe complete all as specified and as directed |
| 56 | Sc& F for Urinal partitions slabs, white, size 310 x 700mm terminating about 40cm above floor line, fixed in repairs complete all as specified and as directed |
| 57 | S&FPillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 20 mm bore complete all as specified and as directed |
| 58 | S&F bib taps screwed down high pressure with both ends for iron pipe 20mm bore fancy typechromium plated ascomplete all as specified and as directed |
| 59 | S&F instop valve cast copper alloy ,chromium plated fancy type, screwed down high pressure with crutchor butter fly handlescrewed both ends for iron pipe complete all as specified and as directed |
| 60 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 61 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 62 | 600mmx450mm beveled edge mirror of selected quality mounted on 6mm thick plywood withfancy frame ofwooden of any size as directed by Engineer-in charge. |
| 63 | S & F in PVC Waste pipe of size 32/40mm dia for WHB/Sink complete all as specified and directed |
| 64 | S & F for Shelf of PTMT fixed soap dish with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed |
| 65 | Supplying and laying 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 66 | Supplying and laying 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 67 | S&FPVC (SWR) pipes single socketed in any length with rubber ring jointsof 75 mm bore laid in trenches or floor complete all as specified and as directed |
| 68 | All as per item No 67 but fixed on walls complete all as specified and as directed |
| 69 | All as per item No 67 but dia of pipe 110 mm complete all as specified and as directed |
| 70 | S&F 75mm dia PVC (SWR)floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed |
| 71 | S&F PVC (SWR) P trap 110mm bore complete all as specified and as directed |
| 72 | S&F 75mm PVC(SWR) vent cowl complete all as specified and as directed |
| 73 | S&F rotational moulded polyetylene water storage tank of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with tank adaptor, Gun-Metal globe or gate valves of 40mm dia , with iron wheel head, screwed both ends for iron pipe and fixed and 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for pipe and fixed including dismantling old ones all as speciifed and as directed . |
| 74 | S&F in repairsShower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and as direcetd. |
| 75 | Dismantling of chain link fencing wire mesh of any size and typeand fix it after completion of work as per site requirement complete all as specified and as directed. |
| 76 | Supplying, fixing, errecting, commissioning andtesting12 Mtrs long high mast lighting system (Shaft in two sections hot deep galvanised) suitable for 50m/sec wind velocity & as per IS-875 Part-III.comprising of and including the following :-(a) Accessories such as head frame, steel wire rope 6mm dia (97/19 guage stainlesssteel wire rope ) double drum winch, galvanised lantern carriage arrangement complete suitable for 08 Nos luminaries symmetrically anditscontrol gear box with motor, lighting finial and trailing cable. (b) Suitable foundation bolts, anchor plates and templates including suitable PCC foundation as per manufacturer’s recommendations. (c)Non integral metal halide flood light fitting luminaries type LED floodlight luminaries 200 watts , 230volts AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant, with driver and lamp-08 Nos.and its control gear box with complete accessories and luminaries wiring material duly prewired.(d) LED type Twin domeaviation obstruction light of type BJAOL 2 of Bajaj or equivalent cat part as ordered - 01 set with lamps 02 Nos. each 100W GLS lamps.(e) Control panel with busbar out door type, CPRI approved, made out of CRCAsheet 3.15 mm thick and angle iron 40x40x6 mm frame, 3 phase, 4 wire, 440 Volts, AC, 50 HZ with 01 No MCCB 63 Amps,415V,16KA (incomer) and timer switch with PVC insulated heat shrink colour code sleeves, mounted horizontaly with porcelain insulators, sufficient air vent provision for all the three sides, stickers / plastic plates for switch gear details including indicating lamps with toggle switches duly wired including, ELR with CBET locking arrngement including suitable foundation and platform for mounting the panel all as specified as directed MAKE:- BAJAJ/CROMPTON. (f) Provision of GI pipe earthing for High mast with 2.5m long 40mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour:-2 Nos ( all as shown in electrical plate No 3 of SSR Part-I,2009 ) (g) Construction of suitable foundation withPCC 1 : 1 1/2 : 3 type A1 using 20 mm graded crushed stone aggregrate for the high mast with all materials and labour, errection of the high mastwith the help of suitable equipments and errection of control panel on suitable foundation etc all as specified and as permanufacturer’s specifications and under their directions. |
| 77 | M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase ,neutral and earth) drawn in and includingnon metalic rigid PVC conduit medium gradewith ISI mark of minimum 20mm dia and all conduit accessories Concealed including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galavanised steel pressed terminal boxes alongwith size modular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed for the following : (a) One light point controlled by one modular switch 6 Amps one wayNote:Location of light points,6 Amp socket points and light fittings may be decidedby Engr-in-charge as per site/user requirment. |
| 78 | (b) One Ceiling/Exahust fan point controlled by one modular switch 6 Amps |
| 79 | All same as per item No 77 here-in-before but with2.5 sqmm size single core multistranded copper conductor cable for 3 pin 16 Amps Modular switch socket combination outlet on independent board with 2.5 sqmm FRLS insulated and unsheathed copper conductor as earth and connected to earth dolly. |
| 80 | S&FModular switch 1 way 6 Amps,1 module all as Specified and directed. |
| 81 | S&F modular switch 1 way 16A,1 module all as Specified and directed. |
| 82 | S&F Modular Type shuttered socket outlet, 3 pin 6A/16 Amps,230 volts 2 modules with ISI mark Complete all as Specified and directed. |
| 83 | S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body including supply and fix PVC square blocks complete all as specified and directed. |
| 84 | S&F LED flood light 200W, IP 65/66, cast Al housing, toughened glass coer, polycarbonate glass cover, high power LED, secondary optical lenses, 10 KV SPD, 110 lm/watts with wired complete all as specified and directed by Engr-in-Charge. |
| 85 | S&FLED tube light fitting of20 watts 6000K , 230 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed by Engr-in-charge. |
| 86 | S&FLED tube light fitting of10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 87 | S&F bldg LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable sizeall as specified and directed. |
| 88 | S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 89 | S&FSheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. |
| 90 | S & F MCB single pole and neutral Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified |
| 91 | S & F MCB single pole 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified Make Indoasian |
| 92 | S&F Exhaust fan AC single phase 230 volts, heavy duty of size 300mm sweep metallic body with louvre shutter,including connecting up 3 core flexible copper wire 24/0.20 sqmm from ceiling rose to fan terminal etc complete all specified and as directed.NOTE: Quoted rate deemed to be included for providing hole by opening in any type ofwalls in the building including neccessary plastering, grouting of nuts & bolts and washerssuitable size and neccessary fixing arrangement for fixing louvre and including making good to disturbedsurface area to its original position. |
| 93 | M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed |
| 94 | M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit depth not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI strip 25x3mm by means of bolts, nuts, check nuts and washers and check nuts of GI or steeel connected to main Electrical Equipments incl necessary earth work and excation incl PCC chamber (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete 1:2:4 type B-1 with 8mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe and protection pipe, wire mesh and lugs all as per electrical plate No 3 of SSR Part-I, 2009 incl testing oncompletion complete all as specified and directed |
| 95 | S&F gun metal gate valve with iron wheel head screwed both ends for iron pipe of size 20 mm dia bore complete all as specified and directed |
| 96 | All as per item No 95 above but of size 25 mm dia bore complete all as specified and directed |
| 97 | Supply and lay in trenches /on roof / on wall / steel water tubing galvanised medium grade 25 mm dia bore with all fittings complete all as specified and directed |
| 98 | Cutting of existing GI/DI Pipe and connecting the pipe line with connected items all as specifoed and directed |
| 99 | M&L for Sand (coarse) cushioning/filling (dry) in trenches obtained from local riverfor protection of UG cables/pipes spreading and consolidated as per Para 19.75 of SSR Part-I complete all as specified and directed by Engr-in-charge . |
| 100 | Supply and laying common burnt bricks of sub class B laid breath wise across the length of cable/pipes in trenches for cable/pipes protection complete all as directed . |
| 101 | Supply, fixing, Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100 Volt grade on walls with fixing acessories of10 Sqmm 4 Core all as specified and directed. |
| 102 | Supply, fixing, Testing and commissioning XLPE insulated armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volt grade of25 Sqmm 4 Core laid in trenches, fixed on poles/walls etc incl provn of necessary lugs and glands & making necessary connection complete all as specified and directed. |
| 103 | M&L for trenchless bore using ultra sounding technique and necessary machine bore of pipe size 100 mm dia suitable for 0.4 Mpa working pressure mechanical numatic drilling eqpt for passing water pipe line upto 100mm dia under the existing bituminous/WBM Road/PCC hard standings, depth range not less than 1.0mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with adjoining specifications all as specified and directed.Notes :-(a)Quoted rates deems to be incl of transportation charges of drilling machine, connected accessories and passing through bore complete with reqd accessories.(b)Pipe will be measured and paid separately.(c)Any damage to MES assets caused during trenchless bore shall be rectified by the contrator at his own cost without extra cost to the deptt. |
