|
| 1 | नीव, खाई,परनाला में 1.5 गहराई तक ममट्टी की खुदाई करना , तल को कूटना , पानी डालना, बगल को संवारना , खुदी ममट्टी को बाहर मनकालना, नीव भरने के बाद खाली स्थानों को पुन: ममट्टी से भरना तथा बची हुई ममटटी को 50 मीटर की दूरी तक मनस्तारण करना सख्त, मचकनी,कंकर ममट्टी में |
| 2 | सीमेन्ट कांमिट नीवं या फर्श में 40 मम.मी. नामीय माप की पत्थर मगट्टी(crusher broken)/ईट ममटटी , सीमेन्ट- रेत मसाला में 1 मसमेन्ट : 4 रेत : 8 मगट्टी अनुपात में डालना तथा कुटाई करना , तराई समेत । पत्थर की मगट्टी (crusher broken) के साथ 40 एमएम िेर्र ब्रोकन पत्थर की मगटटी के स्थान पर हाथ से टूटी हुई रोडी के उपयोग करने पर वही मात्रा देय होगी परन्तु मगटटी की दर में 30 प्रमतर्त की कटौती की जावेगी। |
| 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 5 | सेन्टररंग\"र्टररंग (तख्ता एवम ढुलाबंदी) का आर.सी.सी. छत, स्लेब, छज्जे, मलन्टल आमद डालने के मलए लगाना4.5 मीटर ऊचाई तक के मलए तथा हटाना आमद मवर्ेष मववरण के अनुसार। र्टररंग प्लाई |
| 6 | सीमेंट कंिीट 1:2:4/1:1.5:3 ममश्रण की प्रवमलत सीमेंट कंिीट में डालना तथा आपूमतश करना, छत की स्लैब, छज्जे, बीम, मलंटल आमद में दबाना, तराई करना तथा सतह को 1:3 सीमेंट मसाले से समतल करना आमद समेत पाडबन्दी समहत परन्तु स्टील तथा र्टररंग की कीमत अलग से। अनुपात 1:2:4 |
| 7 | नीवं तथा कुसी प्रथम श्रेणी ईंट की मचनाई सीमेन्ट -बजरी 1:6 या 1:8 मसाले में, मय बगल की मिरी बन्द करने तथा तराई समहत। सीमेन्ट मसाला 1:6 अमतररक्त रामर् अमधरचना में मचनाई कायश में 4.5 मीटर ऊंचाई तक कुसी स्तर से। |
| 8 | Providing and fabricating reinforcement forR.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.(\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 9 | Random rubble dry stone Kharanja under floor. |
| 10 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 11 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm : |
| 12 | सीमेन्ट प्लस्टर दीवार पर 1:4 अनुपात में सीमेन्ट - बजरी ममलाकर जोडों को कुरेदने तथा 14 मदन तक मनयममत तराई समहत 20 मम.मी. मोटाई |
| 13 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 15 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safetyprovision New Work |
| 16 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202- 67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" : 30 mm thick . Commercial Veneer both side |
| 17 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in- charge : Profile B |
| 18 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable. |
| 19 | Window openable. |
| 20 | Window fixed. |
| 21 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 23 | Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4. Dark shade using ordinary cement. Please Enable Macros to View BoQ information |
